• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.8-15
• /
• 1983

1960년초 이래 우리나라는 고도의 경제성장을 이룩하게 되었으며 이러한 경제성장에 따른 산업화 사회의 특징인 공업화 도시화 인구집중 현상은 우리나라에도 심각한 환경오염 문제를 야기시켜 왔다. 또한 같은 기간동안 자동차의 보유대수 역시 급격한 증가를 보여왔던바, 1962년 30,000 대에서 1982년도 자동차 등록대수는 약 640,000대로 증가하게 되었으며 대부분의 자동차가 대 도시에 집중되어 있다. 특히 전체 차량의 40%가 집중되어 있는 서울시의 경우에는 자동차 배 출가스로 인한 대기오염문제가 도시민의 건강과 재산에 많은 피해를 일으키게 되었다. 우리나 라는 선진 외국의 대도시에 비해 자동차의 1일 주행거리가 3배 내지 5배를 더 주행하고 있고 자동차 배출가스 기준의 완화, 노후차량의 증가, 도로율의 불황 및 도로조건의 불비 등은 도시 중심천의 자동차 집중현상과 함께 자동차 배출가스로 인한 대기오염 문제가 보다 더 심각하게 우려되었고, 따라서 자동차 배출가스규제 강화의 필연성이 계속해서 주장되어 왔다. 자동차로 인한 공해문제는 1940년도 후반 미국 남부 California 지방에서 광화학스모그의 발생과 함께 거 론되기 시작하였으나 본격적으로 문제가 제기된 것은 급격한 자동차 증가로 인한 도시민의 건 강피해가 발생하기 시작한 것은 1960년대이다. 처음으로 규제되기 시작한 것은 1965년 미국에서 "자동차 오염방지법"의 제정부터이며 1968년부터 자동차 배출가스에 대한 규제가 시작되었다. 한편 일본은 1973년, 유럽에서는 1975년부터 일산화탄소, 탄화수소, 질소산화물 및 매연에 대한 규제를 시작하게 되었다. 우리나라에서는 "도로운송차량법"에서 도로교통의 안전과 질서유지라는 측면에서 일부 규제하여 오다가 1977년말 "환경보전법"이 제정 공포되면서 1980년 1월 환경정의 발족과 함께 실제로 자동차 배출가스를 규제하게 되었다.발족과 함께 실제로 자동차 배출가스를 규제하게 되었다.을 SUP7H종으로 더욱 향상된 것이 실용 화되고 있다. 아래에서 이에 대한 기계적 특성을 중심으로 검토키로 한다.9%내인 0.07cm 정도였으나 1973년과 1974년의 방축년에는 조차 3개 처리구(3.4-5.18cm)에 필적되는 연평균 4.16cm로 나타났다. 5. 전체 시험구로부터으 연평균 토양유실량은 Sharpsburg 점질양토에 대한 S.C.S 한계허용치 10ton/ha/year 이내로 나타났다. 비처리구에서의 토양유실량은 평균 2.56ton/ha/year로 높게 나타난 반면 3개의 서로 다른 추리구인 비수구, 초생수로구 및 Bromegrass구에서는 각각 0.152, 0.192 및 0.290ton/ha/year로 낮은 결과를 가져왔다. 6. 평균 침전량에 대한 L.S.D. 검정 걸과 전시험구중 비처리구가 고도의 유의차를 나타낸 반면 비수구, 초생수로구 및 Bromegrass 목초구 간에는 아무런 유의차가 인정되지 않았다. 7. 농지보전 처리구인 배수구와 초생수로구는 비처리구에 비해 낮은 침두 유출량과 낮은 토양유실량을 나타내었다.구보다 14% 절감되는 것으로 나타났다.작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가 있음을 시사한다.se that were all low in two aspects, named "the Nonsignificant group". And the issues were high risk perception in

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.135-144
• /
• 2020

Since the depth of tunneling with tunnel boring machine (TBM) becomes deeper and deeper, the expense for site investigation for coring and geophysical survey increases to obtain the sufficient accuracy. The tunnel ahead prediction methods have been introduced to overcome this limitation in the stage of site investigation. Probe drilling can obtain the core and borehole images from a borehole. However, the space in TBM for the probe drilling equipment is restricted and the core from probe drilling cannot reflect the whole tunnel face. Seismic methods such as tunnel seismic prediction (TSP) can forecast over 100 m ahead from the tunnel face though the signal is usually generated using the explosive which can affect the stability of segments and backfill grout. Electromagnetic methods such as tunnel electrical resistivity prospecting system (TEPS) offer the exact prediction for a conductive zone such as water-bearing zone. However, the number of electrodes installed for exploration is limited in small diameter TBM and finally the reduction of prediction ranges. In this study, the theoretical equations for the electrical resistivity survey whose electrodes are installed in the face and side of TBM to minimize the installed electrodes on face. The experimental tests were conducted to verify the derived equations.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.9-15
• /
• 2012

The purpose of this study was to investigate the effects of the secondary tasks such as sending text message (STM) and searching navigation (SN) on skin conductance level (SCL) and driving performance of relatively aged and high-experienced drivers. The subjects included 26 taxi drivers; 12 males aged $56.3{\pm}4.4$ with $28.4{\pm}6.4$ years of driving experiences and 14 females aged $55.5{\pm}3.5$ with $19.4{\pm}5.0$ years of driving experiences. All subjects were instructed to keep a constant following distance (30m) from the car ahead and a given vehicle speed (80km/h or 100km/h) in a driving simulator. The relative change of SCL, vehicle velocity deviations, and average following distances were measured during driving only and driving with secondary tasks. The relative change of SCL, average following distance, and vehicle velocity deviation were more increased during the driving with secondary tasks than driving only. The relative change of SCL, vehicle velocity deviation, and average following distance were more affected by driving with 100km/hr than 80km/hr of a given vehicle speed. Secondary tasks increased a work load of drivers in term of SCL change, and decreased driving performance in terms of the vehicle velocity deviation and average following distance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.1
• /
• pp.51-61
• /
• 2018

Foundation of tower structures such as wind turbine, pylon, and chimney have to resist considerably large overturning moment due to long distance from foundations to load point and large horizontal load. Pile foundations subjected to uplift force are needed to economically support such structure even in the case of rock layer. Therefore, this research performed the laboratory model tests with the variables, W/C ratio and sand proportion, to evaluate the effect of the mix proportion of grouting material on shaft resistance. In the case of cement paste, maximum and residual shaft resistance were distributed in uniform range irrespective of the changes of W/C ratio. However in the case of mortar, they were decreased with increasing W/C ratio, while they were increased and then decreased with increasing sand proportion. In the case of no sand, the maximum shaft resistance was about 540~560kPa regardless of the W/C ratio. When the sand proportion was 40%, it was about 770~870kPa depending on W/C ratio, which was about 40~50% higher than that without sand. The optimum proportion found in this research was around 40% of sand proportion and 80~100% of W/C ratio.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.2
• /
• pp.121-133
• /
• 2014

If the spent fuels or the high-level radioactive wastes can be disposed of in the depth of 3~5 km and more stable rock formation, it has several advantages. For example, (1)significant fluid flow through basement rock is prevented, in part, by low permeability, poorly connected transport pathways, and (2)overburden self-sealing. (3)Deep fluids also resist vertical movement because they are density stratified and reducing conditions will sharply limit solubility of most dose-critical radionuclides at the depth. Finally, (4) high ionic strengths of deep fluids will prevent colloidal transport. Therefore, as an alternative disposal concept to the deep geological disposal concept(DGD), very deep borehole disposal(DBD) technology is under consideration in number of countries in terms of its outstanding safety and cost effectiveness. In this paper, for the preliminary applicability analyses of the DBD system for the spent fuels or high level wastes, the DBD concepts which have been developed by some countries according to the rapid advance in the development of drilling technology were reviewed. To do this, the general concept of DBD system was checked and the study cases of foreign countries were described and analyzed. These results will be used as an input for the analyses of applicability for DBD in Korea.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.123-123
• /
• 2012

최근 연구되고 있는 TSV(Through Silicon Via) 기술은 Si 웨이퍼 상에 직접 전기적 연결 통로인 관통홀을 형성하는 방법으로 칩간 연결거리를 최소화 할 수 있으며, 부피의 감소, 연결부 단축에 따른 빠른 신호 전달을 가능하게 한다. 이러한 TSV 기술은 최근의 초경량화와 고집적화로 대표되는 전자제품의 요구를 만족시킬 수 있는 차세대 실장법으로 기대를 모으고 있다. 한편, 납땜 재료의 주 원료인 주석은 주로 반도체 소자의 제조, 반도체 칩과 기판의 접합 및 플립 칩 (Flip Chip) 제조시의 범프 형성 등 반도체용 배선재료에 널리 사용되고 있다. 최근에는 납의 유해성 때문에 대부분의 전자제품은 무연솔더를 이용하여 제조되고 있지만, 주석을 이용한 반도체 소자가 고밀도화, 고 용량화 및 미세피치(Fine Pitch)화 되고 있기 때문에, 반도체 칩의 근방에 배치된 주석으로부터 많은 알파 방사선이 방출되어 메모리 셀의 정보를 유실시키는 소프트 에러 (Soft Error)가 발생되는 위험이 많아지고 있다. 이로 인해, 반도체 소자 및 납땜 재료의 주 원료인 주석의 고순도화가 요구되고 있으며, 특히 알파 방사선의 방출이 낮은 로우알파솔더 (Low Alpha Solder)가 요구되고 있다. 이에 따라 본 연구는 4인치 실리콘 웨이퍼상에 직경 $60{\mu}m$, 깊이 $120{\mu}m$의 비아홀을 형성하고, 비아 홀 내에 기능 박막증착 및 전해도금을 이용하여 전도성 물질인 Cu를 충전한 후 직경 $80{\mu}m$의 로우알파 Sn-1.0Ag-0.5Cu 솔더를 접합 한 후, 접합부 신뢰성 평가를 수행을 위해 고속 전단시험을 실시하였다. 비아 홀 내 미세구조와 범프의 형상 및 전단시험 후 파괴모드의 분석은 FE-SEM (Field Emission Scanning Electron Microscope)을 이용하여 관찰하였다. 연구 결과 비아의 입구 막힘이나 보이드(Void)와 같은 결함 없이 Cu를 충전하였으며, 고속전단의 경우는 전단 속도가 증가할수록 취성파괴가 증가하는 경향을 보였다. 본 연구를 통하여 전해도금을 이용한 비아 홀 내 Cu의 고속 충전 및 로우알파 솔더 볼의 범프 형성이 가능하였으며, 이로 인한 전자제품의 소프트에러의 감소가 기대된다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.6
• /
• pp.67-76
• /
• 2005

This paper proposes a compact-sized surface myoelectric sensor for the myoelectric hand prosthesis. To fit the surface myoelectric sensor in the socket for the myoelectric hand prosthesis, the sensor should be a compact size. The surface myoelectric sensor is. composed of a skin interface and a single processing circuit that are mounted on a single package. The skin interface has one reference and two input electrodes, and the reference electrode is located in the center of two input electrodes. In this paper we propose two types of sensors with the circle- and bar-shaped reference electrode, but all input electrodes are the bar-shaped. The metal material of the electrodes is the stainless steel (SUS440) that endures sweat and wet conditions. Considering the conduction velocity and the median frequency of the myoelectric signal, we select the inter-electrode distance (IED) between two input electrodes as 18mm, 20mm, and 22 mm. The signal processing circuit consists of a differential amplifier with a band pass filter, a band rejection filter for rejecting 60Hz power-line noise, amplifiers, and a mean absolute value circuit. We evaluate the proposed sensor from the output characteristics according to the IED and the shape of the reference electrode. From the experimental results we show the surface myoelectric sensor with the 18mm IED and the bar-shaped reference electrode is suitable for the myoelectric hand prosthesis.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.200-203
• /
• 2000

Boron doped conducting diamond thin films were grown on Si substrate by microwave plasma chemical vapor deposition from a gaseous feed of hydrogen, acetone/methanol and solid boron. The doping level of boron was ca. $10^2ppm\;(B/C)$. The Si substrate was tilted ca. $10^{\circ}$ to make Si substrate, which have different height and temperature. Experimental results showed that different crystalline of diamond thin films were made by different temperature of Si substrate. There appeared $3\~4$ steps of different crystalline morphology of diamond. To characterize the boron-doped diamond thin film, Raman spectroscopy was used for identification of crystallinity. To survey surface morphology, microscope was used. Grain size was changed gradually by different temperature due to different height. The Raman spectrum of film exhibited a sharp peak at $1334cm^{-1}$, which is characteristic of crystalline diamond. The lower position of diamond film position, the more non-diamond component peak appeared near $1550 cm^{-1}$.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.603-611
• /
• 2011

Ethoxylacetyl oxime ligands [HL, (1) and $H_2L^1$, (3)] react with copper(II) acetate monohydrate yield octahedral and square planar complexes, respectively. The complexes have been postulated due to elemental analyses, IR, UVVis. spectra, magnetic susceptibility, conductivity and ESR spectra. Molar conductance of the complexes in DMF indicates a non-ionic character. The ESR spectra of [$(L)_2Cu(H_2O)_2$], (2) complex at room temperature and 77K are characteristic of an axial symmetry ($d_{x2-y2}$) with covalent bond character and have a large line width typical of dipolar interactions. However, [$(L^1)Cu$], (4) complex in the solid state showed spectra of marked broadening and loss of hyperfine splitting confirming spinexchange interactions between the copper(II) sites. The spectrum of the doped copper(II) complex at room temperature showed super-hyperfine splitting from coordinated nitrogen atoms and it has an axial type ($d_{x2-y2}$) with covalent bond character and an essentially square-planar arrangement around the copper(II) ion. The spectrum of [$(L^1)Cu$], (4) in frozen methanol at 77K was characteristic of the triplet state of a dimer species and the distance found between the two copper(II) centers was calculated and is equal to 4.8 ${\AA}$.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.33-39
• /
• 2017

This study was carried out in order to closely examine the growth and the physiological response by shading levels of a container seedling of Daphniphyllum macropodum which is known as the species of having shade tolerance in a warm temperature evergreen broad-leaved tree. The shading treatment was regulated with the shading level of full sunlight, and 35%, 55%, 75% of full sunlight. As a result of surveying the height and the root collar diameter growth by the shading level, the height was the highest with 13.2 cm under 35% of shading. The root collar diameter was the highest with 4.99 mm under full sunlight. The organ-based (leaves, shoot and root) dry mass production and the whole dry mass production were higher with 1.38 g, 0.47 g, 0.87 g, 2.72 g, respectively, in order of 35% shading. As for chlorophyll a, b, and the total chlorophyll content, the highest chlorophyll content was shown under 75% of shading with the relatively highest shading level. The ratio of chlorophyll a to chlorophyll b (a/b) was the highest under 35% of shading. The photosynthetic rate, stomatal conductance and water use efficiency were the highest with $12.3{\mu}molCO_2{\cdot}m^{-2}{\cdot}s^{-1}$, $0.27molH_2O{\cdot}m^{-2}{\cdot}s^{-1}$, $3.53{\mu}molCO_2{\cdot}mmol^{-1}H_2O$, respectively, under 35% of shading. As a result of surveying the whole experiment, D. macropodum grows nicely by maintaining 35% shading.