• Journal of the Korean Geotechnical Society
• /
• v.27 no.9
• /
• pp.77-86
• /
• 2011

The stress condition mainly dominates the thermal conductivity of soils whereas governing factors such as unit weight and porosity suggested by empirical correlations are still valid. The 3D thermal network model enables evaluation of the stress-dependent thermal conductivity of particulate materials generated by discrete element method (DEM). The relationship among dominant factors is analyzed based on the coordination number and porosity determined by stress condition and thermal conductivity of pore fluid. Results show that the variation of thermal conductivity is strongly attributed to the enlargement of inter-particle contact area by loading history and pore fluid conductivity. This study highlights that the anisotropic evolution of thermal conductivity depends on the directional load and that the particle-scale mechanism mainly dictates the heat transfer in soils.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.9
• /
• pp.1-6
• /
• 2010

H.264 video coding standard is widely used due to the high compression rate and quality. H.264 decoders usually have pipeline architecture by a macroblock or a $4{\times}4$ sub-block. The period of the pipeline is usually fixed to guarantee the operation in the worst case which results in many idle cycles and the requirement of high data bandwidth and high performance processing units. We propose adaptive pipeline architecture for H.264 decoders for efficient decoding and lower the requirement of the bandwidth for the memory bus. Parameters and coefficients are delivered using hand-shaking communication through dedicated interconnections and frame pixel data are transferred using AMBA AHB network. The processing time of each block is variable depending on the characteristics of images, and the processing units start to work whenever they are ready. An H.264 decoder is designed and implemented using the proposed architecture to verify the operation using an FPGA.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.1
• /
• pp.117-124
• /
• 2011

This study was realized the home network system for home care by bio-physical sensor system, to convey for the remote physical signal. The composition condition has four functions of displacement point for a Vision, Somatosensory, Vestibular and CNS that the basic measurement used to a Heart Rate, Temperature, Weight. Physical signal are decided to search a max and min point with adjustment of 0.01 unit in the reference level. There were checked physical condition of body balance to compounded a physical neuroceptor of sensory organ for the measurement such as a Vision, Somatosensory, Vestibular, CNS, BMI. There are to check a health care condition through a combination of physical organ with a posturography of a exercise. The service of home network system can be used to support health care management system through health assistants in health care center and central health care system. It was expected to monitor a physical parameter for the remote control health management system.

• Journal of Sensor Science and Technology
• /
• v.3 no.3
• /
• pp.45-53
• /
• 1994

A new type of Si diaphragm was fabricated using Si-wafer direct bonding and two-step electrochemical etch-stopping methods. Using the new diaphragm structure in mechanical sensors, more precise control of cavity depth and diaphragm thickness was achievable. Also, the propagation of the stress, which was generated near the bonding interface, to the surface can be avoided. Finally, a piezoresistive-type Si pressure sensor was fabricated utilizing the diaphragm and a digital pressure gauge, which can display units of pressure, was realized.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1547-1556
• /
• 2014

In this paper, we propose cost-effective device-to-device (D2D) advertisement scenario with properties of proximity and timeliness through the convergence of D2D communications and social commerce service. We numerically analyze advertisement dissemination effect of the proposed scenario according to the number of sectors, and demonstrate the performance of the normalized D2D coverage, the average number of D2D users, and the average D2D coverage per user via intensive simulations. We verify the accuracy of the results for our numerical analysis compared with the simulation results.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.442-448
• /
• 2021

Flow field is an important parameter for polymer electrolyte membrane fuel cell (PEMFC) performance to have an effect on the reactant supply, heat and water diffusion, and contact resistance. In this study, PEMFC performance was investigated using Cu foam flow field at the cathode of 25 cm² unit cell. Polarization curve and electrochemical impedance spectroscopy were performed at different pressure and relative humidity conditions. The Cu foam showed lower cell performance than that of serpentine type due to its high ohmic resistance, but lower activation and concentration loss due to the even reactant distribution of porous structure. Cu foam has the advantage of effective water transport because of its hydrophobicity. However, it showed low membrane hydration at low humidity condition. The metal foam flow field could improve fuel cell performance with a uniform pressure distribution and effective water management, so future research on the properties of metal foam should be conducted to reduce electrical resistance of bipolar plate.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.2
• /
• pp.109-114
• /
• 2012

The cathode catalyst layer in polymer electrolyte membrane fuel cells (PEMFCs) was fabricated with anodic aluminum oxide (AAO) template and its structure was characterized with scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis. The SEM analysis showed that the catalyst layer was fabricated the Pt nanowire with uniform shape and size. The BET analysis showed that the volume of pores in range of 20-100 nm was enhanced by AAO template. The electrochemical properties with the membrane electrode assembly (MEA) were evaluated by current-voltage polarization measurements and electrochemical impedance spectroscopy. The results showed that the MEA with AAO template reduced the mass transfer resistance and improved the cell performance by approximately 25% through controlling the structure of catalyst layer.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.4
• /
• pp.290-305
• /
• 2015

To improve the practicality of 'Early warning service about agrometeorological weather hazards' and operation efficiency to deliver site-specific about a lot of land unit possibility of weather hazard occurrence with the suitable counterplan to farmer, site-specific early warning service system that was built at the National Academy of Agricultural Science in Korea passed some of the error supplementation and service's stabilization stage during operation period for trial services from October 2014 to March 2015. Field service system covered about 470 volunteered farmer and 950 lots in Seomjin river downstream areas (part of Gwangyang-si, Hadong-gun, Gurye-gun). This system (Two track system) consists of early warning system (a lot of land unit) to inform farmer by individual text message and dispersal prior alert system that can see the jurisdiction's situation of local government. Individual text message about Seomjin river downstream that is our first study area was launched since $2^{nd}$ March 2015, and online site (http://www.agmet.kr) started business since April 2015. Service offers currently information of farm weather, farm weather hazard, nationwide weather risk and special weather alert, also our system will consistently expand the service target area and contents and improve the service quality until 2017 when our study finished. To prevent crops damage that was caused by crisis situation like farm weather and weather damage offer prior alert about agrometeorological weather harzard to volunteered farmer, thereby our study expects to help the reduction of farm's damage caused by weather derivatives.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.5
• /
• pp.379-384
• /
• 2009

This study was carried out to understand the national and regional distribution of the biomass resources produced in Korea annually via establishing database (DB) and distribution maps of biomass resources data including as livestock manures, food wastes and agricultural by-product. The information of the annual production of each biomass resources was obtained from Ministry for Food, Agriculture, Forestry and Fisheries (MIFAFF), Ministry of Environment (MOE) and National Statistical Office (NSO). Based on biomass resources data, we established database architecture table about livestock manures and food wastes. The distribution maps for the total amount of manures produced from each livestock animal were built up in both national and regional scales and used for analysis of the space-based and time-based distribution of the manure resources. Distribution maps for food wastes and agricultural by-product were also produced, respectively. It was shown that the analysis through resource mapping can be used to identify the sources of collectable biomass feasibly determining suitable region for establishment of a biomass-energy production. The biomass distribution maps graphically provide the information regarding biomass resources to policy-makers, farmers, general users and it was expected to be utilized for policy-making of environmental-friendly agriculture and bio-energy.

• Korean Journal of Environmental Biology
• /
• v.30 no.3
• /
• pp.210-218
• /
• 2012

The morphological characteristics, carbon and nitrogen concentrations, stable isotope values and photosynthetic rates of Porphyra yezoensis were studied at the main purple lavers production areas on southwestern coast of Korea. The morphological characteristics of leaf length, leaf width and weight of Porphyra blades were between 11.6~16.3 (average 13.8) cm, 4.6~6.3 (average 5.4) cm, $1.1{\sim}2.6(average\;1.86)g\;DW\;m^{-2}$, respectively. Photosynthetic pigment of Chl a concentration of Porphyra blades was between $2.18{\sim}17.77(average\;9.65)mg\;DW\;Chl\;a\;m^{-2}$. Carbon and nitrogen concentrations of Porphyra blades was between $201{\sim}317(average\;240)mg\;DW\;g^{-1}$, $39.8{\sim}50.0(average\;43.5)mg\;DW\;g^{-1}$ and C/N ratio 5.0~6.7 (average 5.5). The range of average ${\delta}^{13}C$ and ${\delta}^{15}N$ values of Porphyra blades was between - 25.6 to - 24.0 (average - 24.7)‰ for ${\delta}^{13}C$, and 1.3 to 4.1 (average 2.1)‰ for ${\delta}^{15}N$. Photosynthetic characteristics of seaweeds measured by pulse amplitude modulation (PAM) fluorometry was used as an indicator of photosynthetic activity. We use Diving-PAM fluorometry to examine photosynthetic rates of the seaweeds Porphyra yezoensis at each station. Maximum quantum yield of Porphyra blades was between 0.46~0.55 (average 0.52), the variance of the effective PS II maximum quantum yield of the station was broadly similar. Maximum relative electron transport rate (rETRmax) of Porphyra blades was between $4.71{\sim}5.84(average\;5.33){\mu}mol\;electrons\;m^{-2}\;s^{-1}$, the changes of maximum relative electron transport rate (rETRmax) of Porphyra yezoensis were similar to those of PS II maximum quantum yield. Photosynthetic efficiency (${\alpha}$) was between 0.027~0.045 (average 0.036). Minimum saturating irradiance ($E_k$) range was $139{\sim}180(average\;156){\mu}mol\;photons\;m^{-2}\;s^{-1}$. Minimum saturating irradiance ($E_k$) made a difference by station within the area on southwestern coast. Carbon and nitrogen concentrations and photosynthetic rates of Porphyra blades production areas on southwestern coast were broadly similar. The photosynthetic characteristics showed low photosynthetic rates because the low maximum quantum yields and low maximum relative electron transport rate.