• Journal of the Korean Geotechnical Society
• /
• v.31 no.4
• /
• pp.45-55
• /
• 2015

The stability of the adjcent structures or slopes under blasting is typically evaluated using an empirical vibration attenuation curve or dynamic numerical analysis. To perform a dynamic analysis, it is necessary to determine the blast load and the damping ratio of rock mass. Various empirical methods have been proposed for the blast load. However, a study on representative values of damping ratio of a rock mass has not yet been performed. Therefore, the damping ratio was either ignored or selected without a clear basis in performing a blast analysis. Selection of the dampring ratio for the rock mass is very difficult because the vibration propagation is influenced by the layout and properties of the rock joints. Besides, the vibration induced by blasting is propagated spherically, whereas plane waves are generated by an earthquake. Since the geometrical spreading causes additional attenuation, the damping ratio should be adjusted in the case of a 2D plane strain analysis. In this study, we proposed equivalent damping ratios for use in continuum 2D plane strain analyses. To this end, we performed 2D dynamic analyses for a wide range of rock stiffness and investigated the characteristics of blast vibration propagation. Based on numerical simulations, a correlation between the attenuation equation, shear wave velocity, and equivalent damping ratio of rock mass is presented. This novel approach is the first attempt to select the damping ratio from an attenuation relationship. The proposed chart is easy to be used and can be applied in practice.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.3
• /
• pp.15-23
• /
• 2020

Ground motion models predicting intensity measures on surface use a time-averaged shear wave velocity, V_S30, as a key variable simulating site effect. The V_S30 can be directly estimated from V_S profiles if the profile depth (z) is greater than or equal to 30 m. However, some sites have V_S profiles with z < 30 m. In this case V_S30 can be predicted using extension models. This study proposes new coefficient sets for existing prediction equations using 297 Korea V_S profiles. We have collected V_S profiles from KMA and Geoinfo database. Fitting six existing methods to data, we suggest new coefficients for each method and evaluate their performance. It turns out that if z ≥ 15 m, the standard deviation (σ) of residual in log₁₀ is 0.061, which indicates that the estimated V_S30 is nearly accurate. If z < 15 m, the σ keeps increasing up to 0.1 for z = 5 m, so we caution the use of models at very low z. Nonetheless, we recommend investigating up to 30 m depth for V_S30 calculation if possible.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2002

The metallurgical reaction properties between the pad consisted of 0.5 $\mu\textrm{m}$Au/5 $\mu\textrm{m}$Ni/Cu layers on a conventional ball grid array (BGA) substrate and In-15 (wt.%)Pb-5Ag solder ball were characterized during the reflow process and solid aging. During the reflow process of 1 to 5 minutes, it was observed that thin $AuIn_2$ or Ni-In intermetallic layer was formed at the interface of solder/pad. The dissolution rate of the Au layer into the molten solder was about $2\times 10^{-3}$ $\mu\textrm{m}$/sec which is remarkably low in comparison with a eutectic Sn-37Pb solder. After solid aging treatment for 500 hrs at $130^{\circ}C$, the thickness of $Ni_{28}In_{72}$ intermetallic layer was increased to about 3 $\mu\textrm{m}$ in all the conditions nevertheless the initial reflow time was different. These result show that In atoms in the solder alloy were diffused through the $AuIn_2$ phase to react with underlaying Ni layer during solid aging treatment. From the microstructural observation and shear tests, the reaction properties between In-15Pb-5Ag alloy and Au/Ni surface finish were analyzed not to trigger Au-embrittlement in the solder joints unlike Sn-37Pb composition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.260-265
• /
• 1999

멀티빔 음향측심기(Multibeam Echo Sounder)는 기존의 단빔 음향측심기(Singlebeam Echo Sounder)와 달리 탐사선 진행방향의 수직(Crosstrack)으로 해저면을 주사(Swath)하여, 한 번의 송수신(Ping)으로 다중의 빔 자료 - 수심, 후방산란된 음압(Backscattered Amplitude), 사이드 스캔 소나(Side Scan Sonar) 자료 - 를 취득하는 장비이다. 멀티빔 음향 측심기를 이용한 해저면 탐사의 경우, 수심이 변함에 따라 주사폭(Swath width)이 변화하고, 각 빔의 수평 해상도(Footprint)는 수심과 더불어 빔폭(Beam width)에 의하여 동적으로 변화한다. 멀티빔 음향 측심기는 해저면을 전역탐사 할 수 있을 뿐만 아니라, 연속된 음향 탐사를 통하여 이웃한 핑 사이에 발생하는 전방중첩영역(Endlap)과 이웃 측선(Trackline)을 따라 겹쳐지는 측방중첩영역(Sidelap)의 자료들을 이용하여 멀티 뎀 자료들의 전반적인 정확도 및 신뢰도를 평가할 수 있다. 본 논문은 수로 측량(Hydrographic Survey)에서 사용되는 멀티빔 음향 측심기를 운영하여 얻어진 측심 자료를 처리하는 알고리즘 개발에 관한 연구이다. 본 논문에서는 L3사의 Sea Beam 2100 벌티빔 음향 측심기를 대상으로, 멀티빔의 측심 원리와 해저 지형에 대한 일반적 이해를 통하여 획득된 측심 자료의 통계적 특성을 파악하고, 오측심된 수심 자료를 제거하는 방법을 제안하며, 측심 구간의 대표격자 크기를 결정하는 기준을 제시한다. 또한, 항공원격탐사에서 고도 추정시 사용되고 있는, 평균보간법, 가중평균 보간법과, 본 논문에서 제안하는 격자 대표값 선정 알고리즘(Gridding Algorithms)의 결과를 비교하고, 최종적으로 얻어지는 해저 수치지형모델(DEM, Digital Elevation Model)과 후방산란 영상을 제시한다. 빠른 한지형잔디들이 지표면을 피복하도록 하고 여름의 고온기와 장마시기에는 뿌리전단력이 우수한 이러한 초종들로 지표면이 피복되도록 하는 것이 이상적이라 생각된다. 4. 혼파처리간의 토사유출량을 비교한 결과 토사 유출 억제효과는 한지형과 나지형잔디들의 혼합형(MixtureIII)과 자생처리구(MixtureV), Italian ryegrass와 자생식물의 혼합형(MixtureIV)등에서 비교적 낮은 수치를 토사유출량을 기록하였다. 이러한 결과는 자생식물들이 비록 초기생육속도는 외래도입초종에 떨어지지만 토사유출의 억제효과면에서는 이들 외래초종에 필적할 수 있음을 나타낸다고 할 수 있겠다.중량이 약 115kg/$m^2$정도로 나타났다.소 들(환경의 의미, 사람의 목적과 지식)보다 미학적 경험에 주는 영향이 큰 것으로 나타났으며, 모든 사람들에게 비슷한 미학적 경험을 발생시키는 것 이 밝혀졌다. 다시 말하면 모든 사람들은 그들의 문화적인 국적과 사회적 인 직업의 차이, 목적의 차이, 또한 환경의 의미의 차이에 상관없이 아름다 운 경관(High-beauty landscape)을 주거지나 나들이 장소로서 선호했으며, 아름답다고 평가했다. 반면에, 사람들이 갖고 있는 문화의 차이, 직업의 차 이, 목적의 차이, 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하게 경계

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2009

Physico-chemical characteristics of the Ca-based and Na-based dry sorbents were compared using thermo-gravimetric analysis (TGA) and temperature programmed desorption (TPD) methods. The studied characteristics were thermal stability, sulfur dioxide ($SO_2$) absorption capacity and absorption rate at $250^{\circ}C$ which is a typical temperature before a fabric filter, and $SO_2$ absorption capacity at an ambient temperature. Calcium hydroxide ($Ca(OH)_2$) started to decompose into calcium oxide (CaO) at $390^{\circ}C$ and completed at 480~$500^{\circ}C$, showing 76% of an original $Ca(OH)_2$ weight. Sodium bicarbonate ($NaHCO_3$) also converted to sodium carbonate ($Na_2CO_3$) between $95^{\circ}C$ and $190^{\circ}C$, decreasing the weight to 63% of its initial weight. Among four sorbents tested at $250^{\circ}C$, sodium carbonate had the highest capacity, absorbing 0.35 g $SO_2$/g sorbent. Calcium oxide and calcium hydroxide followed that showing 0.156 g and 0.065 g $SO_2$ absorption per absorbent respectively. Ca-based absorbents showed slower rate than sodium carbonate because of initial stagnant step. However, calcium hydroxide caught more $SO_2$ than sodium carbonate at ambient temperature. From this work, it can be concluded that Ca-based absorbent is a proper sorbent for $SO_2$ treatment at low temperature and sodium carbonate, at high temperature.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.523-530
• /
• 2007

A total of 127 Korean native black pigs(gilt 30, boar 97) were used to investigate the carcass properties, yields of retail cut and meat quality. The average live weight, chilled carcass percentage and retail cut percentage used in this study were 74.69kg, 71.14% and 61.09% for boar, and 75.5kg, 73.88% and 56.25% for gilt, respectively. Although gilts were higher in live weight and chilled carcass percentage whereas lower in retail cut percentage when compared to boars, there was no significantly difference between gender(p<0.05). Gilts had higher fat contents than boars regardless of weight range groups. Protein contents increased as slaughter weight increased for gilt and boar groups. Gilts contained high intramuscular fat contents had significantly lower Warner-Bratzler shear force(WBS) and water holding capacity(WHC) when compared to boar in the same weight range group(p<0.05). There was no significantly different in meat color(p>0.05) although gilts had higher L(lightness), a(redness) and b(yellowness) values when compared to the same group of boar. From the result of this study can be used for the grading guideline and quality evaluation standard of Korean native black pigs by gender and live weight.

• Journal of the Society of Disaster Information
• /
• v.14 no.3
• /
• pp.334-342
• /
• 2018

Purpose: The purpose of this study is to examine and improve the issues related to National Safety Inspection currently operation and reform the system for response to various disasters. Method: For the completion, this study established theoretical background using materials related to National Safety Inspection and identified the issues using the open statistical data for National Safety Inspection to suggest the improvement plans. Results: National Safety Inspection has been operating a complete large-scale inspection on risk factors in cooperation with the central government, local governments, and citizens since 2015 to remove various disaster factors neglected in people's daily lives. Operation of National Safety Inspection had positive influence in preventing major disasters. However, inefficient activity is pointed out due to issues related to cooperation with other institutes, limitation for citizen's positional role, and superficial inspection. Conclution: To solve this issue, this study proposed strengthening of communication activity with disaster institutes, strengthening of efficiency through citizen participation by type, and actualization of checklist used in National Safety Inspection.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.2
• /
• pp.118-126
• /
• 2014

The establishment of the technology for evaluating friction resistance and pipe pressure and the relation of the fluid characteristics and pumpability of concrete is essential for concrete pumping performance for the rapid construction of super-tall buildings. In this study, a quantitative evaluation of concrete fluid characteristics and surface friction resistance was performed, applying different concrete mix proportions and pumping conditions. To achieve this, we developed a temporary horizontal pumping evaluation system to measure pipe pressure and surface friction characteristics, and performed an experiment to investigate the relations between concrete rheology characteristics and friction resistance in pipe. The experiment found that in terms of the rheology characteristics, plastic viscosity was reduced remarkably after pumping. As well, high regression between the surface friction and pressure gradient was confirmed. This means that it is possible to evaluate the friction resistance between concrete and pipe by means of a pumping system that includes a frictional resistance testing pipe. In addition, high regression between the plastic viscosity of concrete after pumping and friction resistance coefficient was confirmed. Finally, it is considered that pumping pressure can be predicted using the friction resistance coefficient derived in this study, and it has high regression.

• Parasites, Hosts and Diseases
• /
• v.25 no.1
• /
• pp.51-58
• /
• 1987

Tegumental ultrastructures of Echinochasmus japonicus were observed by scanning electron microscopy. The worms were recovered from albino rats which were experimentally infected with the metacercariae obtained from Pseudorasbora parva. Followings are summarized findings. 1. The worms were minute and plumpy gourdshaped with attenuated anterior and round posterior end. The tegument of whole body was wrinkled transversely and covered with cobblestone-like cytoplasmic processes. 2. Head crown was armed with 24 collar spines which were embedded in cytoplasmic pockets. The spines were arranged in a row with an interruption at dorsomedian line, however, the 2nd and the 4th spines were outstretched more than others. Oral and ventral suckers were muscular with numerous type II sensory papillae, and genital pore opened between the two suckers. 3. Tegumental spines were spade-shaped with broad base and pointed tip. They were compact in ventra-lateral tegument or dorsal surface of anterior body. They were not found between the two suckers and dorsal surface of posterior body. 4. Two types of sensory papillae, uni-ciliated (Type I) and roundly swollen sensory papillae (Type II), were observed. The type I papillae were chiefly distributed on ventral surface of tegument and type II were on the lips of suckers. Arrangement of collar spines, shape and distribution of tegumental spines or sensory papillae are regarded as characteristic features of E. japonicus.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.155-164
• /
• 2014

Carbon-fiber-reinforced plastic (CFRP) composites are increasingly being used in a variety of industry applications, such as aircraft, automobiles, and ships because of their high specific stiffness and high specific strength. Aircraft are exposed to high temperatures and high humidity for a long duration during flights. CFRP materials of the aircraft can absorb water, which could decrease the adhesion strength of these materials and cause their volumes to change with variation in internal stress. Therefore, it is necessary to estimate the characteristics of CFRP composites under actual conditions from the viewpoint of aircraft safety. In this study air-coupled ultrasonic testing (ACUT) was applied to the evaluation of water absorption properties of CFRP composites. CFRP specimens were fabricated and immersed in distilled water at $75^{\circ}C$ for 30, 60, and 120 days, after which their ultrasonic images were obtained by ACUT. The water absorption properties were determined by quantitatively analyzing the changes in ultrasonic signals. Further, shear strength was applied to the specimens to verify the changes in their mechanical properties for water absorption.