• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.109-116
• /
• 2004

In this study, when variable-amplitude load with various applying mode acts on the pre-crack tip, we examined how fatigue cracks behave. Hence aspects of the deformation caused by changing the applying mode of single overload and propagation behavior of fatigue crack were experimentally examined: What kinds of the deformation would be formed at pre-crack and its tip\ulcorner What aspects of the residual plastic deformation field would be formed in front of a crack\ulcorner How aspects of the plastic zone could be evaluated\ulcorner As applying mode of single overloading changes, the deformation caused by tensile and shear loading variously showed in each applying mode. The different aspects of deformation make influence on propagation behavior of cracks under constant-amplitude fatigue loading after overloading with various modes. We tried to examine the relationship between aspects of deformation and fatigue behavior by comparing the observed deformation at crack and crack propagation behavior obtained from fatigue tests.

• Food Science of Animal Resources
• /
• v.24 no.1
• /
• pp.37-43
• /
• 2004

The "Ginseng Pork" produced by feeding ginseng by-products can be a compatible product in the sense of increasing pork consumption and developing functional food in the international pork market. This experiment was conducted to produce "Ginseng Pork" with emphasis on growth performance and meat quality. Experiments were conducted in which 30 Landrace heads were fed with bark of ginseng root(BGR) or heating extracts ginseng leaves and stem(HEG). WB-shear force was not different among the treatment groups until 15 days of ageing, but pork fed with the 6% BGR showed a higher shear force at 20 day of storage at 4$^{\circ}C$. Cooking loss showed lower value for the 9% BGR group compared with the control group. At 15 day, the 3% and 9% BGR groups showed lower cooking losses than control. Pork groups fed HEG showed a significantly(p<0.05) lower TBARS values after 5 days of storage. As for VBN analysis, the feeding groups of 9% BGR and 5.5% HEG had significantly lower values at 5 and 20 days when compared to the other treatment groups. It might be concluded that the accumulation of ginseng saponin in the pork resulted in retarding the ageing and inhibiting the oxidation.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.266-271
• /
• 2014

The effects of antioxidants on the properties of Polycarbonate/Acrylonitrile-Butadiene-Styrene(PC/ABS) blends were studied for the functions of the screw speed and loaded duration of high shear rate processing in order to investigate the degradation for PC/ABS blends. Tris-(2,4-di-tert-butyl-phenyl phosphate) (A1) and Bis(2,4-dicumylphenyl) pentaerythritol diphosphite (A3) as phosphite antioxidants and Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate (A2) as a phenolic antioxidant are used. The thermal properties were detected by TGA and severely decreased, after the processing. The stress-induced and thermal degradation for PC/ABS blends with the antioxidant A3 was retarded better than the others. By using UTM, the mechanical properties also showed individually decreased according to the antioxidants, after the processing, especially, the elongations showed considerable decline behaviors, while the tensile strengths of PC/ABS blends changed very little. For example, in the operating conditions of 1000rpm of screw speed and 20 seconds of loaded period, the elongations decreased from 148% before the processing, to 91.6% with the A1, to 63% with the A2 and to 131% with the A3 after the processing, respectively. In order to get the morphological properties, the size distributions of the dispersed phases for PC/ABS were investigated by SEM analysis and tended to decrease, as the screw speed and loaded period of the processing increased. Therefore, we confirmed that the antioxidant A3 was the best of all of three to inhibit the stress-induced degradation of PC/ABS blends during the high shear rate processing.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1005-1010
• /
• 1999

To study the shortening of rigor mortis and changes in the morphological properties of gamma-irradiated pre-rigor bovine muscle (M). Sternomandibularis during post mortem, this experiment was performed with a test of shear force and the observation of the ultrastucture of raw muscle. The time elapsed until maximum shear force values was shortened by gamma irradiation, depending upon the dose. The release of rigor mortis started earlier than control (non-irradiated muscle). A shortening of the length of the Z-line and the maintenance of the sarcomere length by gamma irradiation was observed. The breakdown of the perimysium of muscle bundles was observed more in irradiated samples than in the control. In conclusion, it is considered that gamma irradiation on pre-rigor beef shortens aging-period, improves tenderness and enhances the beef quality.

• International Journal of Highway Engineering
• /
• v.5 no.3 s.17
• /
• pp.1-9
• /
• 2003

This study was performed to evaluate the effect of various joint sealant on reducing the reflection cracking of asphalt concrete overlay on cement concrete pavement. The test method used was an accelerated reflection cracking test in shear mode, which was developed for evaluation of reflection cracking resistance of overlaid asphalt concrete in laboratory. The test results showed that use of joint sealants resulted in a significant reduction of reflection cracking. When sealant E was used, the fatigue life was the highest, with relatively larger horizontal deformation. When Sealant B was used, the dynamic stability was the highest with the smallest horizontal deformation. In general, the greater the tensile strength of sealant, the better the crack resistance of the mixture.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.4
• /
• pp.754-759
• /
• 1998

Background : Lung cancer is an important public health problem because of rapidly increasing malignancy in both sexes in relation with high smoking rate in Korea. Despite advances in therapeutic modalities and supportive cares, 5-year survival rate has improved only marginally during the past 2 decades. Therefore, the early detection of lung cancer is strongly needed for better prognosis and we conducted this study to review the clinical factors resulting in delayed diagnosis of lung cancer. Method: The clinical data such as presenting symptoms, duration for diagnosis, disease entities causing misdiagnosis or delayed diagnosis, were analyzed retrospectively in 154 patients with primary lung cancer diagnosed at Chungnam National university hospital from January to December in 1995. Results : 63 patients(40.9%) out of 154 patients were delayed diagnosed with the duration of 6.3 months compared with 3.6 months in patients diagnosed without delay. In delayed diagnosed group, Cough & sputum and dyspnea as presenting symptom were more critical than hemoptysis and chest pain, and doctor's delay was more critical than patient's delay. Tuberculosis(30/63) was most frequent disease entity causing delayed diagnosis, followed by pneumorua(9/63), COPD(6/63), heart diseases(5/63), etc.. Conclusion: It should be emphasized that any respiratory symptom be checked with chest X-ray to differentiate lung cancer and periodic check of chest X-ray be also needed for the longterm patients with any disease, especially with high risk group.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.663-668
• /
• 2003

With the advent of high speed networking technology, computers connected to the high-speed networks tend to consume more of their CPU cycles to process data. So one of the solutions to improve the performance of the computers is to reduce the CPU cycles for processing the data. As the consumption of the CPU cycles is increased in proportion to the number of the packets per second to be processed, reducing the number of the packets per second by increasing the length of the packet is one of the solutions. In order to meet this requirement, two types of jumbo packets such as jumbograms and jumbo frames have already been standardized or being discussed. In case that the jumbograms and general packets are interleaved and scheduled together in a router, the jumbogrms may deteriorate the QoS of the general packets due to the transfer delay. They also frequently exhaust the memory with storing the huge length of the packets. This produces the congestion state easily in the router that results in the loss of the packets. In this paper, we analyze the problems in processing the jumbo packets and suggest a noble solution to overcome the problems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1910-1916
• /
• 1999

This paper suggested to solve ATM switch performance and service rate which was input buffer managed scheme in ATM network with burst traffic characteristics, For this purpose, ATM multiplexer is prepared before sending for handling burst random input traffic to multiplex and then sort based on cell inter-arrival time and cell processing due time which had been marked after that. The server looks for cell header with the most shortest due time and sends it, thus it is satisfied that real time traffic for instance CBR and rt-VBR was guaranteed cell processing time to send fast than non real time traffic. For analysis of ATM switch performance with cell processing due time and priority, each output port has divided into four different virtual buffer and each buffer has assigned different cell inter-arrival time and processing due time according to ATM Forum for example CBT/rt-VBR, nrt-VBR, ABR and UBR and showed it’s optimal service parameters then analyzed service rate behaviors according to each traffic characteristics.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.4
• /
• pp.9-16
• /
• 2000

This paper shows the performance of a multiuser detection DS-CDMA receiver based on of the hybrid scheme of parallel interference cancellation (PIC) and successive interference cancellation (SIC). The proposed hybrid interference cancellation is presented and is compared with existing PIC, SIC and Hybrid It of other type schemes. The performance criteria used for comparison are complexity, delay and average bit error rate (BER) performance obtained by simulation in Rayleigh-fading channel (Jake's model) with additive white Gaussian noise (AWGN). In the proposed hybrid IC, the BER performance approximates the one of SIC and the delay is half of the SIC. And the number of cancellation of the hybrid It is reduced about a fourth.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.7
• /
• pp.988-993
• /
• 2012

The objective of this study was to investigate the physicochemical properties of Yukwa bases with different quantities of Soju during long-term storage. We examined Yukwa bases with 5 different quantities (0%, 25%, 50%, 75%, and 100%) (v/w) of Soju after intervals of 10 days up to 50 days at $30{\pm}1^{\circ}C$. The L and a values of all Yukwa bases decreased as storage time increased. The b value of Yukwa bases with 0% Soju increased as storage time increased, but Yukwa bases with 25~100% Soju decreased. The compression and shared force decreased as storage time increased for all subjects, but those with bases of 50% and 75% Soju changed less during storage. The acid values of all Yukwa bases increased significantly during storage. In addition, the peroxide values of all Yukwa bases significantly increased during storage time. Yukwa bases with 0% Soju showed great change of the peroxide value during long-term storage. The peroxide values of all Yukwa bases changed less as the quantity of Soju increased.