• Journal of the Korean Geotechnical Society
• /
• v.27 no.1
• /
• pp.41-52
• /
• 2011

The hypothesis on effective stress of unsaturated soil is validated by $K_0$ consolidation results of triaxial tests for the compacted residual soil. The stress characteristic curve (SSCC) can describe unsaturated soil behavior on water contents, which was defined from shear strength or from soil water characteristic curves. In this study, it was found that the stress path of $K_0$ consolidation can also define the SSCC. The effective stress was defined by SSCC. $K_0$ paths for various matric suctions could be described as a unique line by effective stress. The measured values of $K_0$ were interpreted by effective stress as a constant with respect to matric suction. Since the SSCC from $K_0$ consolidation agrees with that from the shear strength, the SSCC from soil water retention curve could describe effective stress behavior consistently on both $K_0$ consolidation path and stress at failure. The effective stress based on SSCC can describe the entire unsaturated behavior from consolidation to failure.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.5
• /
• pp.529-545
• /
• 2012

Three-dimensional (3D) finite element analyses have been performed to study the behaviour of a single pile to open face tunnelling in stiff clay. Several key factors such as tunnelling-induced ground and pile settlement, and shear transfer mechanism have been studied in detail. Tunnelling resulted in the development of pile settlement larger than the Greenfield soil surface settlement. In addition, due to changes in the shear transfer between the pile and the soil next to the pile with tunnel advancement, axial force distributions along the pile change drastically. The apparent allowable pile capacity was reduced up to about 30% due to the development of tunnelling-induced pile head settlement. The skin friction on the pile was increased with tunnel advancement associated with the changes of soil stresses and ground deformation and hence axial pile force distribution was reduced. Maximum tunnelling-induced tensile force on the pile was about 21% of the designed pile capacity. The zone of influence on the pile behaviour in the longitudinal direction may be identified as ${\pm}1$-2D (D: tunnel diameter) from the pile centre (behind and ahead of the pile axis in the longitudinal direction) based on the analysis conditions assumed in the current study. Negative excess pore pressure was mobilised near the pile tip, while positive excess pore pressure was computed at the upper part of the pile. It has been found that the serviceability of a pile experiencing adjacent tunnelling is more affected by pile settlement than axial pile force changes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.583-587
• /
• 2006

국부세굴의 발생은 일반적으로 흐름조건, 구조물 조건과 하상재료 세 가지의 주 원인으로 구분할 수 있다. 흐름조건의 경우 구조물 영향으로 발생되는 3차원적인 와류가 주요원인이며 하상재료의 경우 여러 요인이 있겠지만 비중이 같은 입자라 가정할 경우 입자의 크기를 주요 변수로 정할 수 있다. 교각 국부세굴에 관한 연구는 1960년대 이후 연구자들에 의해 매우 다양하게 수행되어 졌으며 많은 산정공식도 제시되었다. 하지만 기존 연구는 최대세굴심 조건으로 다양한 하상재료와 시간에 대한 세굴변동(홍수사상 등)에 대한 영향을 고려하는데 어려움이 있다. 특히 국내의 경우 다양한 하상재료와 홍수빈도를 고려할 때 이에 대한 세굴적용은 매우 중요한 인자라 할 수 있다. 따라서 교각세굴에 대한 궁극적인 목적은 다양한 하상재료와 홍수빈도를 고려할 수 있는 세굴평가를 제안하는데 있다. 이를 위해 본 연구에서는 우선적인 연구로 입자의 다양성과 이미지 기법을 이용한 실시간 측정을 통해 보완하여 입자에 따른 시간적 변화를 분석하였다. 현재 4가지의 하상재료의 입경차이에 따른 국부세굴의 시간적 변화와 초기세굴 발생의 수리적 조건을 파악하고 기존연구와 비교분석하였으며, 이를 기초자료로 세굴심$(S,\;S_{max})$, 교량주변 전단력$({\tau}_p,\;{\tau}_{pc})$, 접근수로부 전단력$({\tau}_a)$와 입자한계전단력$({\tau}_c)$에 대한 시간분석 (time effect)을 통해 다양한 하상재료와 홍수빈도를 해석을 위한 초기분석을 수행하는데 목적이 있다. 수리모형실험에 사용된 가변경사수로의 제원은 $0.6m(W){\times}20m(L){\times}2m(H)$이며 모형구조물은 투명한 아크릴로 제작하였다. 실험방법은 교각 내부에 CC카메라를 전 후면 및 상측면에 설치하여 세굴 발생을 실시간으로 촬영한 후 이미지 분석을 통해 분석하였다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.3 no.1
• /
• pp.19-24
• /
• 1966

The maximum shear stress distribution in a stiffening flat attached to a plat undergoing a single tensile force has been investigated by photoelastic method. In the experiments a photoelastic model, as shown in Fig. 1, has been studied in the fields of a polariscope, as shown in Fig. 2. Fig. 3 shows the isoclinics and Fig. 4 and 5 are stress trajectories of the principal stresses and maximum shear stresses, respectively. Fig. 6 is the isochromatics in light field. The maximum shear stress at each point in the stiffener were determined from the isochromatics in both of light field of light field and dark field. Then the maximum shear stresses were divided by the average shear stress in the model, to obtain the ratio ${\tau}max/{\tau}av$ at each point. Finaly the variations of the ratio ${\tau}max/{\tau}av$ along the horizontal and vertical lines in the stiffener have been plotted, as shown in Fig. 7 and 8. The conclusions reached in this investigation are as follows: (1) The shear stresses transmitted to the stiffener through the juncture are concentrated on the end portions. (2) The maximum shear stress at the ends of the stiffener reaches to about 4 times of average shear stress. (3) The irregularities in the stress distribution are restricted in the end portions of the stiffener.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.65-73
• /
• 2000

An elasto-plastic constitutive model was proposed, in which the behavior at small-to-large strain level can be modeled. The proposed model is based on the anisotropic hardening description with the generalization of isotropic hardening rule and the total stress concept. From a mathematical approach it was proved that the model includes the previous successful models. The model was verified by a series of resonant column tests, torsional shear tests and triaxial tests, and the proposed model predicted small-to-large strain behavior more consistently and accurately than the hyperbolic model and the Ramberg-Osgood model for a weathered granitic soil. In addition, the nonlinearity under small strain condition was predicted appropriately for the torsional shear test results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.255-260
• /
• 1993

The behavior of pure silt was investigated by using an automated triaxial testing device. The stress-strain behavior of silt due to the volume deformation tendency was compared with the behavior of clay prior to failure and behavior at failure under monotonic undrained compression and extension conditions. A pure silica flour was chosen to form samples. The isotropically normally-consolidated samples with 450 kPa of effective mean confining pressure and overconsolidated samples through unloading were tested. Based on the experimental results, it was qualitatively identified that the undrained strength of normally-consolidated silt increases due to its dilatant nature which is not seen in clay. Also the overconsolidated silt shows a significantly different behavior under the monotonic loadings due to the volume deformation tendency.

• Geotechnical Engineering
• /
• v.3 no.3
• /
• pp.7-20
• /
• 1987

To obtain meaningful data of the tests for cyclic loading triaxial test, cyclic loading simple shear test ; and Shake table studies, it is necessary to test uniformly densified specimens. However, there is still some question about the assumed uniform density within a specimen when subjected to the process of densification. A study is conducted to investigate the density variation It within the specimen and analyze the effect of various parameters during the process of vibratory densification. It is found that variation of the ideally graded sand having a homogeneous initial density results in large inhomogeneities within the specimen after vibration. The degree of density variation within the speimen becomes more pronounced by the gradation of sand, surcharge and the intensity of acceleration.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.87-97
• /
• 2008

Behaviors of cemented engineered soils, composed of rigid sand particle and soft rubber particle, are investigated under $K_o$ condition. The uncemented and cemented specimens are prepared with various sand volume fractions to estimate the effect of the cementation in mixtures. The vertical deformation and elastic wave velocities with vertical stress are measured. The bender elements and PZT sensors are used to measure elastic wave velocities. After cementation, the slope of vertical strain shows bilinear and is similar to that of uncemented specimen after decementation. Normalized vertical strains can be divided into capillary force, cementation, and decementation region. The first deflection of the shear wave in near field matches the first arrival of the primary wave. The elastic wave velocities dramatically increase due to cementation hardening under the fixed vertical stress, and are almost identical with additional stress. After decementation, the elastic wave velocities increase with increase in the vertical stress. The effect of cementation hinders the typical rubber-like, sand-like, and transition behaviors observed in uncemented specimens. Different mechanism can be expected in decementation of the rigid-soft particle mixtures due to the sand fraction. a shape change of individual particles in low sand fraction specimens; a fabric change between particles in high sand fraction specimens. This study suggests that behaviors of cemented engineered soils, composed of rigid-soft particles, are distinguished due to the cementation and decementation from those of uncemented specimens.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.110-110
• /
• 2017

하천시설물 설계, 시공 및 관리에 있어서 하상재료는 매우 중요하다. 예를 들어, 재료에따른 호안이나 하안의 보호능력이 떨어지거나 수리적 특성에 의해 쉽게 파손될 수 있으며, 구성물질에 의해 하천환경의 변화를 야기시킬 수 있다. 때문에 본 연구에서는 비독성 자연형 하상재료를 이용하여 홍수시 수리조건을 반영하여 상류에서부터 사류까지 다양한 Froude 수에 따른 저항력에 대한 실험을 진행하였다. 본 연구의 실험진행은 기 개발된 바닥응력을 직접측정하는 장치와 PIV시스템을 이용하여 수리특성을 측정하였다.(Park J.H. et al. 2016, Flow Measurment and instrumentation.) 또한 각각의 조건에 따른 수리학적 특성의 변화를 비교하였다. 하상 재료는 콘크리트를 배제한 자연형 제방이나 하상에 사용되는 재료를 이용하여 비교하였으며 Foude 수는 일반적인 흐름의 상류에서 홍수 시, 고유량에서 발생하는 사류까지 다양한 범위에서 실험을 진행하였으며, 이러한 재료와 Froude 수에 따른 토양 유실에 대한 실험을 진행하였다. 토양 유실율의 측정 장비로는 초음파 변위계를 이용하여 실험 전, 후의 세굴심 변화를 이용하여 토양의 세굴면적을 수치화 시킨 수치로 적용하여 토양 유실율을 산정하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.4
• /
• pp.434-444
• /
• 1994

Physical and acoustic properties of sediment core samples recovered from the Kwangyang Bay, the Yeosu Sound, and the inner shelf of central South Sea, Korea were investigated. Compressional wave velocity, density, porosity, and shear strength were measured at 10cm interval's along the core depth. Sediment texture(grain size, sand, silt, and clay contents) were also measured and correlated with the physical properties(density, porosity, and shear strength). The physical and acoustic properties of the sediment changed gradually from the Kwangyang Bay to the shelf area in accordance with the distance from the input source of the terrigenous sediment. The Yeosu Sound acted as a route of sediment transport from the estuary(the Seomjin River) to the shelf and vice versa. The physical and acoustic properties of the Yeosu Sound sediment conformed to an intermediate stage between river mouth and shelf areas. These results can be utilized to trace the influence of the Seomjin River on the so-called mud belt of Korea.