• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.835-841
• /
• 2012

This study was conducted to determine effect of dietary reduced antibiotics supplementation on carcass characteristics and meat quality of finishing pigs fed stevia and charcoal. A total of 180 pigs (LYD) were randomly allocated into 3 treatments with 3 replications. Dietary treatments were 1) T1 (control, basal diet, no stevia and charcoal addition, antibiotics both in early and late fattening periods), 2) T2 (basal diet, 0.3% stevia + 0.3% charcoal, antibiotics both in early and late fattening periods), 3) T3 (basal diet, 0.3% stevia + 0.3% charcoal, antibiotics in early fattening period only). At each marketing day, pigs were conventionally slaughtered, examined the carcass characteristics and loin (Longissimus) muscles were removed for the meat quality traits. In the carcass characteristics, T3 group showed higher incidence of A carcass grade compared to the other treatments. Backfat thickness was higher in T2 group compared to the others (p<0.05). In the meat quality traits, pH was higher in T1 group than T3 group (p<0.05). Cooking loss was higher in T2 group than T1 group (p<0.05). However, WHC (water holding capacity), drip loss and shear force values did not show any significant differences among treatments. In the panel test, there were no significant differences in tenderness, juiciness, flavor, and total acceptability scores among treatments. As a result, dietary supplementation of reduced antibiotics to finishing pigs fed stevia and charcoal showed similar growth performance and meat quality traits compared to conventional method.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.3
• /
• pp.126-134
• /
• 2001

Several angular sandstone fragments (about 7 cm in longest diameter) occur in two piston cores, obtained from the submarine trough in the northeastern part of Korea Strait. The origin of the sandstone fragments and the paleoenvironment of trough sediment could be suggested from sedimentary facies analysis of cores and identification of ostracod within sandstone fragments. Echo characteristics around two core sites in submarine trough represent the prolonged bottom echoes with diffuse or no subbottom reflectors. The cores consist of a lower bioturbated mud and an upper gravelly sand sediments with sandstone/shell fragments. The bioturbated mud sediments show low water contents (27-44%) and high shear strength (19.2->37 kPa) compared with those of Holocene sediments (60-219% and 1.0-2.7 kPa, respectively) in the inner shelf and continental slope. However, clay contents (48-56%) of the bioturbated mud sediments are similar to those of fluviatile Holocene sediments in the inner shelf. The mean grain size of gravelly sand sediments ranges from 2.3 to 3.0 ${\phi}$ and shows coarsening upward with sandstone/shell fragments. The Holocene palimpsest in the continental shelf are composed of muddy sand sediments or sandy mud sediments (mean grain size: 4.6-7.6 ${\phi}$). Those suggest that two core sediments might be formed from Paleofluvial and paleocoastal deposits during sea-level lowstand. However, sandstone fragments mainly consist of quartz grains and bioclasts, with carbonate matrix, hollow pore, and glauconite. Two extinct ostracod species, Normanicythere sp. and Kotoracythere sp., are recovered in the sand-stone fragments of core EP-7, and they continued to exist from late Pliocene to early Pleistocene in cold water environment of this area. Thus, the sandstone fragments are interpreted to be formed at the paleocoastal environment derived from the Plio-Pleistocene outcrops exposed around the submarine trough during the LGM (Last Glacial Maximum) period.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.721-730
• /
• 2005

Effects of levels of Bomboo Vinegar Liquids(BVL) on growth performance, serum profile and meat quality in employing 90 pigs were investigated. Ninety pigs were allocated into 3 groups and fed by dietary levels of BVL 0(control), 2.0 and 4.0% were included in experimental diets of each of the groups. Concentrated diet was supplemented with 2.0 and 4.0% BVL. The results showed that the daily weight gains and the feed conversion increased significantly(p<0.05) in 2.0% BVL and the feed intake increased slightly. The glucose and the cholesterol contents at the serum decreased significantly(p<0.05) in 2.0 and 4.0% BVL. On the other hand the total protein concentration and the blood urea nitrogen(BUN) increased significantly(p<0.05) in 4.0% BVL. The carcass weight increased significantly(p<0.05) in 4.0% BVL, and back fat thickness had decreased significantly(p<0.05) in 2.0 and 4.0% BVL. The carcass grade tended to increase in 2.0 and 4.0% BVL. The total fat content of loin tended to increase in 2.0 and 4.0% BVL while the cholesterol content decreased significantly(p<0.05). The pH had lower slightly in 2.0 and 4.0% BVL, the lightness and the yellowness of the meat color had higher significantly(p<0.05) while the redness decreased. Shear force values had lower significantly(p<0.05) in 2.0 and 4.0% BVL. For the fatty acid composition, the saturated fatty acids decreased significantly(p<0.05) in 2.0 and 4.0% BVL while unsaturated fatty acids(oleic acid and linoleic acid) increased significantly(p<0.05). For the sensory evaluation, 2.0 and 4.0% BVL had a significant(p<0.05) effect of diminishing the odor and improving the appearance. The taste was also significantly(p<0.05) improved. In conclusion the 2.0% BVL had a positive effect on the feeding performance, the carcass grade and the meat quality characteristics therefore 2.0% BVL is the appropriate supplemental levels of BVL for finishing pigs.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.769-782
• /
• 2005

Twenty four Holstein steers fed commercial concentrates with rice straw(T1), mixed grass hay(T2), or wet brewer’s grains based TMR ad libitum(T3) were used to investigate the effects of roughage feeding type during the growing and early-fattening periods on growth performance, feed efficiency and carcass characteristics. Growth performance and feed efficiency were investigated during the feeding trial conducted from 6 to 23 mo of age, and carcass characteristics were investigated after slaughter. Body weight at slaughter and daily gains were 751 to 802 kg(mean 782 kg) and 1.064 to 1.159 kg/d(mean 1.122 kg/d), respectively, showing that those for T2 were highest followed by T3. Compared with T1, the daily gain for T2 was improved by 8.9%. The TDN intakes per kg gain were 6.87, 7.17 and 7.15 kg for T1, T3 and T2, respectively, indicating that feed efficiency for T2 was improved(approx. 5%) compared with T1. The feeding treatments did not change dressing percentage(mean 60.8%), back fat thickness(6.68 mm) and rib-eye area(84.0$cm^2$). Neither meat quality characteristics nor physicochemical properties were significantly different among the treatments. However, economic analysis accounting for 882.8, 991.7 and 943.8 thousand won per head for T1, T2 and T3, respectively, indicated that T2 and T3 increased(7-12%) total net income compared with T1. Therefore, it may be concluded that high quality meat of Holstein steers can be produced if they are fattened until 23 mo of age and that feeding mixed grass hay as roughage or TMR containing mainly wet brewer's grains during the growing and early-fattening periods can improve growth performance compared with feeding rice straw.

• Applied Biological Chemistry
• /
• v.37 no.2
• /
• pp.130-141
• /
• 1994

A continuous two-stage membrane (1st-SCMR, MWCO 10,000; 2nd-SCMR, MWCO 5,000) reactor was developed and optimized for the production of fish skin gelatin hydrolysate with different molecular size distribution profiles using trypsin and pronase E. The optimum operating conditions in the 1st-step membrane reactor using trypsin were: temperature, $55^{\circ}C$ ; pH 9.0; enzyme concentration, 0.1 mg/ml; flux, 6.14 ml/min; reaction volume, 600 ml; and the ratio of substrate to trypsin, 100 (w/w). After operating for 1 hr under the above conditions, 79% of total amount of initial gelatin was hydrolysed. In the 2nd-step using pronase E under optimum operating conditions[temperature, $50^{\circ}C$ ; pH 8.0; enzyme concentration, 0.3 mg/ml; flux, 6.14 ml/min; reaction volume, 600 ml; and the ratio of substrate to pronase E, 33 (w/w)], the 1st-step hydrolysate was hydrolysed above 80%. Total enzyme leakages in the 1st-step and 2nd-step membrane reactors were about 11.5% at $55^{\circ}C$ for 5hrs and 9.0% at $50^{\circ}C$ for 4 hrs, respectively. However, there was no apparent correlation between enzyme leakage and substrate hydrolysis. The membrane has a significant effect on activity lose of trypsin and pronase E activity for 1 hr of the membrane reactors operation. The loss of initial activity of enzymes were 34% and 18% in the 1st-step and 2nd-step membrane reactor, whereas were 23% and 10% after operating time 3 hr in the 1st-step and 2nd-step membrane reactor lacking the membrane, respectively. The productivities of 1st-step and 2nd-step membrane reactor for 8 times of volume replacement were 334 mg and 250 mg per mg enzyme, respectively.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.681-697
• /
• 1994

The enzymatic hydrolysate of gelatin extracted from fish skin was fractionated and recycled through the membrane reactor according to the molecular weight for the purpose of using as functional material. In addition, the enzymatic hydrolysis conditions of gelatin, enzyme stability by membrane and mechanical shear, and effect on the long-term operational stability of the recycle membrane reactor were investigated. Using the pH-drop technique, Alcalase, pronase E and collagenase were identified as the most suitable enzymes for the hydrolysis of fish skin gelatin. The optimum hydrolysis conditions in the 1st-step membrane reactor(1st-SMR) by Alcalase were enzyme concentration 0.2mg/ml, substrate-to-enzyme ratio(S/E) 50(w/w), $50^{\circ}C$, pH 8.0, reaction volume 600ml and flow rate 6.14ml/min. In the 2nd-SMR by pronase E were enzyme concentration 0.3mg/ml, S/E 33(w/w), $50^{\circ}C$, pH 8.0, reaction volume 600ml and flow rate 6.14ml/min. In the case of 3rd-SMR, enzyme concentration 0.1mg/ml, S/E 100(w/w), $37^{\circ}C$, pH 7.5, reaction volume 600ml and flow rate 10ml/min. Decreased enzyme activities by mechanical shear and membrane were 30% and 15% in the 1st-SMR, were 14% and 5% in the 2nd-SMR, and 18% and 8% in the 3rd-SMR, respectively. Under the optimum conditions, the degree of hydrolysis in the 1st, 2nd and 3rd-SMR were 3.5%(Kjeldahl method, 87%), 3.1%(77%) and 2.7%(70%), respectively. The productivity of hydrolysate in the continuous three-step membrane reactor was 430mg per enzyme(mg) for 10 times of volume replacements.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.319-325
• /
• 2004

The objective of the present study was to investigate the effect of processing conditions on the physical and sensory properties of pork cutlet produced from chilled pork loin (T1), the cured and massaged chilled pork loin (T2), the cured and massaged frozen pork loin (T3), frozen pork loin (T4), massaged frozen pork loin (T5). Water holding capacity (WHC) of pork cutlets were not significantly different among the treatments. In chilled pork loin, WHC of T2 were slightly higher than that of T1. T4 showed the lowest WHC among all treatment group. In meat color, CIE L$\^$*/, a$\^$*/. b$\^$*/ values in chilled pork loin were not significantly different between T1 and T2. L$\^$*/ values of T3 and T5 were higher than that of T4. a$\^$*/ values were not significantly different among the all treatments. T3 produced through the curing and massaging treatment showed the highest tenderness in shear force (p< 0.001), while force value (kg/㎤) of T4 were the highest among all treatments. Separation ratio of wheat dough from pork cutlet was highest (p.<0.001) in T4. In triangle test, T1 : T3 combination was higher than that of other pairs. No differences in acceptability of sensory evaluation were observed among T1, T2, T3, and T5 groups, while the frozen pork showed the lowest (p<0.001) acceptability. In conclusion, pork cutlets from T4 with the curing and/or massaging process showed similar acceptance than those from chilled pork loins, and this treatments may contribute to promote the consumption of frozen pork loins.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.05a
• /
• pp.35-81
• /
• 1998

Distinct Element Method(DEM) has a great advantage to model the discontinuous behaviour of jointed rock masses such as rotation, sliding, and separation of rock blocks. Geometrical data of joints by a field monitoring is not enough to model the jointed rock mass though the results of DE analysis for the jointed rock mass is most sensitive to the distributional properties of joints. Also, it is important to use a properly joint law in evaluating the stability of a jointed rock mass because the joint is considered as the contact between blocks in DEM. In this study, a stochastic modelling technique is developed and the dilatant rock joint is numerically modelled in order to consider th geometrical and mechanical properties of joints in DE analysis. The stochastic modelling technique provides a assemblage of rock blocks by reproducing the joint distribution from insufficient joint data. Numerical Modelling of joint dilatancy in a edge-edge contact of DEM enable to consider not only mechanical properties but also various boundary conditions of joint. Preprocess Procedure for a stochastic DE model is composed of a statistical process of raw data of joints, a joint generation, and a block boundary generation. This stochastic DE model is used to analyze the effect of deviations of geometrical joint parameters on .the behaviour of jointed rock masses. This modelling method may be one tool for the consistency of DE analysis because it keeps the objectivity of the numerical model. In the joint constitutive law with a dilatancy, the normal and shear behaviour of a joint are fully coupled due to dilatation. It is easy to quantify the input Parameters used in the joint law from laboratory tests. The boundary effect on the behaviour of a joint is verified from shear tests under CNL and CNS using the numerical model of a single joint. The numerical model developed is applied to jointed rock masses to evaluate the effect of joint dilation on tunnel stability.

• Korean Journal of Poultry Science
• /
• v.47 no.3
• /
• pp.159-167
• /
• 2020

This study investigated the effect of different light sources in the poultry house on performance, meat quality, and blood composition of finishing broilers. Two hundred and forty male broilers (1-day-old, 42.2±0.1 g) were divided into three groups and subjected to different light source treatments (incandescent, LED, and fluorescent lamps) from 3 weeks of age (four replications/treatment, 20 birds/replication). After breeding for 6 weeks, the carcass yield and meat quality of broilers with similar body weight (BW; 3.4±0.07 kg) were investigated, and blood components were analyzed. Corn-soybean meal-based feed was provided as starter (CP 22.5%, ME 3,020 kcal/kg), early (CP 18.5%, ME 3,050 kcal/kg), and finishing (CP 18%, ME 3,100 kcal/kg). Performance, carcass yield, meat quality, and blood components were evaluated. BW, BW gain, feed intake, and feed conversion ratio did not show any significant differences among treatments. There was no significant difference on live weight and carcass yield among treatments. There was no significant difference on meat color, shear force, and water holding capacity; however, cooking loss at 17.2% was the highest in the LED treatment (P<0.05). There was no significant difference on blood components except for glucose (blood biochemistry component) among treatments. Glucose was 234.5 mg/dL, 256.9 mg/dL, and 250.1 mg/dL in the three treatments, respectively, with a significant difference between incandescent and LED treatments (P<0.05). These results are used useful as basic data for investigating the effect of lighting in broilers production.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.323-334
• /
• 2000

This study was carried out to investigate the effects of geological and topographical features on landslide and land-creep at the twenty four surveyed sites of Kyungpook province. According to the results obtained, it was concluded that continuous heavy rainfall was one of the primary factors to occur landslide and land-creep. Most of the landslides occurred in the past were concentrated in the granite and granitic gneiss zones, while land-creeps were mainly occurred in the mud-stone zones. Therefore, it was thought that the physical properties such as soil texture, solid phase, moisture contents, density, hardness and porosity rate of weathered granite and granitic gneiss could affect the occurrence of landslide and land-creep. Due to the holding of sand contents in the upper soil layers of weathered granite and granitic gneiss, rainfall could infiltrate into the soil easily. While lower soil layers contained much quantity of clay and silt contents, those soils saturated with rainfall cause to lose viscosity and shear strength. Therefore, it was seemed that landslide was occurred more easily and the saturation of those soils was made much easily by bed rocks under those soils. Landslide and land-creep are slided into lower place by gravitation and slope degree factors. Therefore, prediction of landslide occurrence is very difficult because landslide is occurred abruptly, and physical properties of the soil have to be understood and checking the existence of bed rocks under the soils is not easy, on the other hand, land-creep is progressed very slowly. Therefore, it was suggested that in a degree creeping could be protected by removing of several causing factors.