• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.85-94
• /
• 2006

Triaxial tests at isotropic confining pressure of 200 kPa were carried out to show the undrained shear behavior of artificially cemented sands, which were cemented by gypsum, and the influences of relative density and DOC (degree of cementation) were investigated from the results. The yield strength, the elastic secant modulus at yield point and the peak frictional angle of cemented sands increased abruptly compared to uncemented sands, and it was checked that cementation exerts more influence on the behavior of sand than the relative density. But after breakage of the cementation bonds, the relative density was more important factor on the behavior of sand than the cementation. Because the compressibility md the excess pore pressure of cemented sands were reduced due to the cementation bonds, the effective stress path of cemented sands was going toward to the total stress path of uncemented sands. The cementation of sand restricted the dialtion of sand at the pre-yield condition, but induced more dilation in the post-yield condition.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.12
• /
• pp.23-32
• /
• 2008

This paper presents the results of numerical investigation on the stability of reinforced earth wall during rainfall. A series of limit-equilibrium based slope stability analyses within the framework of unsaturated shear strength, coupled with transient seepage analyses, were conducted with due consideration of rainfall characteristics in Korea. It is shown that the factor of safety of the reinforced wall during rainfall decreases with time due to decreases in the suction in the reinforced as well as retained zones. Also revealed is that the decrease in the factor of safety depends not only on the backfill soil type but also on the rainfall characteristics. Practical implications of the findings were discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.55-55
• /
• 2020

개수로 흐름에서 유체특성을 파악하는 것은 매우 중요하다. 특히 홍수가 발생하거나 유속의 증가에 따라 유체의 거동은 복잡하고 예측하기 어려워진다. 이러한 복잡한 유체거동은 하천시설물 설계, 시공 및 관리에 있어서 구성재료의 보호능력에 따라 예상하지 못한 조건에서 쉽게 파손될 수 있다. 국내 하천의 경우 한계유속과 한계소류력에 의해 하천설계에 적용되고 있다. 한계 유속의 경우 간단한 수식에 의해 산정될 수 있지만 실제 하천의 보호능력을 대표하기는 힘들기 때문에 한계소류력이 동시에 고려되어야 한다. 한계소류력은 개수로 흐름에서 복잡하게 발생하는 이차류나, 난류 특성에 의해 산정하거나 예측하기는 매우 어렵다. 한계 소류력 뿐만 아니라 하천을 구성하는 재질의 조도계수 역시 균일하지 못하고 매우 예측하기 어렵다. 따라서 본 연구에서는 이러한 복잡한 양상을 나타내는 수리학적 요소에 대해 표준화된 실험수로에서 실험을 통해 평가하고, 체계화된 설계지침이 되고자 연구를 진행하였다. 본 연구에서는 자연하천과 유사한 조건의 경사를 가지는 경사수로와 경사의 영향에서 자유롭게 평가를 진행하고자 무경사수로에서 실험연구를 통해 제방 재료의 안정성 평가방법을 제시하고, 재체의 안정성 평가를 위한 실험진행은 기 개발된 바닥응력을 직접측정하는 장치와 PIV시스템을 이용하여 수리특성을 측정하였다.(Park J.H. et al. 2016, Flow Measurment and instrumentation.) 하천의 설계나 평가에 적용되는 평균 소류력 개념은 복잡한 난류흐름에서 평가지표로써 대표하기 힘들기 때문에 바닥에서 발생하는 소류력을 직접 측정하고, 측정된 소류력을 검증하고자 난류유속 u', v'을 이용하여 Reynolds stress산정하여 Total shear stress를 추정하는 기법을 사용하여 검증하고자 한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.201-210
• /
• 2023

This study is to evaluate the ductility strengthening effect of aramid fiber sheets on piloti-type structures. Two piloti-type structure specimens were prepared and tested under statical cyclic lateral loads. The ductility strengthening effect was validated from the analysis of lateral load-displacement relationship, displacement ductility ratio, work damage index and torsion behavior. Test results showed that the post-peak behavior of piloti-type structures with columns strengthened with aramid fiber sheets tended to be ductile resulting from preventing shear failure and minimizing torsion due to the effective lateral confinement of column concrete by aramid fiber sheet. Consequently, the displacement ductility ratio and work damage index of piloti-type structures with columns with strengthened with aramid fiber sheets were 4.63 and 42.81 times higher than those of non strengthened piloti-type structures.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.3
• /
• pp.155-165
• /
• 2024

A hybrid thin film was prepared by doping reduced graphene oxide (rGO) into a sol-gel solution mixed with aluminum, titanium, and strontium using a brush coating method. The annealing temperature was carried out at 160, 260, and 360℃, and the difference in oxidation reaction was observed. The sol-gel solution created during the membrane manufacturing process generates a contractile force due to the shear stress of the brush bristles, forming a microgroove structure. This structure was confirmed through scanning electron microscopy analysis, and the presence of rGO was clearly revealed. As the annealing temperature increases, the oxidation and reduction reactions on the thin film surface become more active, so the intensity of the surface mixture increases. Moreover, the electro-optical properties were stabilized and improved by increasing the intensity of the mixtures. Likewise, the voltage-capacitance values are also significantly improved. Lastly, the transmittance measurement showed that it was suitable for liquid crystal display application.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.6
• /
• pp.113-120
• /
• 2007

For the cases of constructing reinforced earth and gabion walls on the soft ground, an appropriate replacement area of soft ground required to maintain the stability of walls was investigated by FEM analyses. Incremental analyses were performed in FEM, in which construction sequences including consolidation of soft soil layer were simulated. As a first step to suggest the appropriate replacement area, a series of analyses for cases varying the replacement depth were conducted to examine the behaviors of wall and adjacent ground according to the construction sequence. The analysis results were, then, evaluated with the proper limiting values of displacements of wall, settlements and shear strains of ground to guarantee the stability of walls, which were specified based on the literature review. Consequently, the typical construction drawings could be suggested, in which appropriate replacement areas for varying wall heights for the ground condition investigated in this study were represented in terms of the ratio of replacement depth to the height of wall.

• Korean Journal of Poultry Science
• /
• v.38 no.4
• /
• pp.293-304
• /
• 2011

The current work was carried out to investigate the effect of crossbred Korean native chickens (KNC) on performance and meat quality. A total of 720 chicks (1d of age) was used in this work and were divided into groups by crossbreds (A, B, C and D) and sex (male and female). Crossbreds were A) (KNC egg-meat type C strains ${\times}$ KNC meat type S strains) ${\times}$ Ross broiler, B) (KNC egg-meat type C strains ${\times}$ KNC meat type H strains) ${\times}$ KNC meat type S strains, C) (KNC native R strains${\times}$KNC meat type S strains)${\times}$KNC meat type H strains and D(White Semibroiler Chickens). Experimental diets consisted of 3 phases such as starter (0~5 weeks; CP 20.0%, ME 3,050 kcal/kg), earlier (5~8 weeks; CP 18.0%, ME 3,100 kcal/kg) and finisher (8~12 weeks; CP 16.0%, ME 3,150 kcal/kg). They were fed the broiler diets for 12 weeks at the flat house and thirty six chickens were slaughtered at week 5 and 10. There was no significant difference on the fertility of crossbred KNCs, and the hatchability of B crossbred was low compared to other crossbreds. On body weight (BW), D crossbred resulted in a higher BW after 5 weeks (P<0.05). Body weight gain (BWG) and feed intake (FI) of A crossbred were also significant higher compared to the other crossbreds for all periods. On carcass ratio (CR), A crossbred showed higher CR at 5 weeks, there was no significant among crossbreds at 10 weeks. The partial meat ratio(ala, breast, neck, leg) of C crossbred was the lowest among other crossbreds (P<0.05), but the back meat ratio was not difference among treatments at 5 and 10 weeks. pH of meats have no difference among crossbreds at 5 week, and A crossbred was high compared to other crossbreds at 10 week (P<0.05). The moisture content of D crossbred meat and the protein content of B crossbred meat were high compared to other crossbreds at 5 week. Chemical compositions of meats have no difference among crossbreds at 10 week. Lightness and redness have not significance among crossbreds at 5 week, and redness of A crossbred was the highest among all crossbreds (P<0.05). Shear force and cooking loss of A crossbred were high at 5 week, and cooking loss of A crossbred was low compared with other crossbreds at 10 week. These results suggested the basic data that needed to develope the new strains.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.504-511
• /
• 2010

This study was undertaken to investigate the effects of feeding complex probiotics (Lactobacillus casei, Bacillus subtilis, Saccharomyces cerevisiae, Aspergillus oryzae, Streptomyces griseus, $1.5{\times}10^{10}$ CFU/kg) and antibiotics (oxytetracycline (OTC), 110 ppm) on growth performance and meat quality characteristics of broiler chicks. In the experiment 1, 0.3% complex probiotics feeding level was chosen to be proper addition level due to better average daily gain (ADG), feed conversion (FC) and dressing percent (DP) results among 3 levels (0.1, 0.3 or 0.5%). In the experiment 2, 5 treatments (T1, no probiotics + no antibiotics; T2, probiotics 0.3% + no antibiotics; T3, probiotics 0.3% + antibiotics 50%; T4, probiotics 0.3% + antibiotics 100%; T5, no probiotics + antibiotics 100%) were investigated. In the growth performance of broilers, T5 (antibiotics 100% only) showed the highest (p<0.05) ADG and FC values while T1 (control) showed the worst growth performance. However, T3 (probiotics 0.3% + antibiotics 50%) showed higher ADG (p<0.05), FC (p<0.05) and DP (p>0.05) values compared to control. In the breast and leg meat quality, T3 showed similar pH, proximate composition, cooking loss and meat color values except shear force value compared to T5. Addition of 0.3% probiotics with 50% antibiotics (T3) tended to lower the blood cholesterol levels of broiler chicks and Escherichia coli or Salmonella counts in cecum microflora of broiler chicks compared to T5. In the residual antibiotics analysis, T3 contained 0.04 ppm of residual antibiotics in the breast meat while T4 or T5 contained 0.1 ppm of residual antibiotics and addition of 0.3% probiotics with 50% antibiotics in broiler diets could lower the residual antibiotics level to 40% in the meat. As a result, 0.3% probiotics addition with 50% antibiotics in the broiler diets could be recommended for the production of high quality broiler meat.

• Progress in Medical Physics
• /
• v.2 no.2
• /
• pp.109-120
• /
• 1991

Total body irradiation is operated to irradicate malignant cells of bone marrow of patients to be treated with bone marrow transplantation. Field size of a linear accelerator or cobalt teletherapy unit with normal geometry for routine technique is too small to cover whole body of a patient. So, any special method to cover patient whole body must be developed. Because such environments as room conditions and machine design are not universal, some characteristic method of TBI for each hospital could be developed. At Seoul National University Hospital, at present, only a cobalt unit is available for TBI because source head of the unit could be tilted. When the head is tilted outward by 90$^{\circ}$, beam direction is horizontal and perpendicular to opposite wall. Then, the distance from cobalt source to the wall was 319 cm. Provided that the distance from the wall to midsagittal plane of a patient is 40cm, nominal field size at the plane(SCD 279cm) is 122cm$\times$122cm but field size by measurement of exposure profile was 130cm$\times$129cm and vertical profile was not symmetric. That field size is large enough to cover total body of a patient when he rests on a couch in a squatting posture. Assuming that average lateral width of patients is 30cm, percent depth dose for SSD 264cm and nominal field size 115.5cm$\times$115.5cm was measured with a plane-parallel chamber in a polystyrene phantom and was linear over depth range 10～20cm. An anthropomorphic phantom of size 25cm wide and 30cm deep. Depth of dose maximum, surface dose and depth of 50% dose were 0.3cm, 82% and 16.9cm, respectively. A dose profile on beam axis for two opposing beams was uniform within 10% for mid-depth dose. Tissue phantom ratio with reference depth 15cm for maximum field size at SCD 279cm was measured in a small polystyrene phantom and was linear over depth range 10～20cm. An anthropomorphic phantom with TLD chips inserted in holes on the largest coronal plane was bilaterally irradiated by 15 minute in each direction by cobalt beam aixs in line with the cross line of the coronal plane and contact surface of sections No. 27 and 28. When doses were normalized with dose at mid-depth on beam axis, doses in head/neck, abdomen and lower lung region were close to reference dose within $\pm$ 10% but doses in upper lung, shoulder and pelvis region were lower than 10% from reference dose. Particulaly, doses in shoulder region were lower than 30%. On this result, the conclusion such that under a geometric condition for TBI with cobalt beam as SNUH radiotherapy departement, compensators for head/neck and lung shielding are not required but boost irradiation to shoulder is required could be induced.

• Korean Journal of Poultry Science
• /
• v.40 no.1
• /
• pp.1-9
• /
• 2013

This study was investigated the effects of dietary supplementation of Yacon by-product powder on performance, pH, total phenol contents, DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity, TBARS, WHC, shear force, meat color, and sensory evaluation of chicken thigh meat. Broiler chicks were fed diets for five weeks containing 0% Yacon by-products powder (Control), 0.5% Yacon by-products powder (T1), 1.0% Yacon by-products powder (T2), and 2.0% Yacon by-products powder (T3). There was no significant difference in performance among treatments, but mortality was decreased in diets by the supplementation of Yacon by-product powder than that of control. The total cholesterol, LDL-cholesterol and triglyceride of control were higher than treatment groups and HDL-cholesterol and glucose of control was lower than treatment. The pH and TBARS were significantly decreased by the supplementation of Yacon by-product powder compared to the control (P<0.05). The total phenol contents and DPPH radical scavenging activity were significantly increased by the supplementation of Yacon by-product powder compared to those of the control group (P<0.05), and especially, T3 was significantly (P<0.05) more effective in improving freshness compared to other treatment groups. The WHC (water holding capacity) and shear force were not significantly different. CIE $L^*$ and $a^*$ value of treatment groups showed significantly higher value compare to the control, however, no difference in the CIE $b^*$ values was observed among treatment groups. In conclusion, a supplementation of Yacon by-product powder was effective in decreasing pH and TBARS (thiobarbituric acid reactive substance), and increasing total phenol contents and DPPH radical scavenging activity.