• The Korean Journal of Rheology
• /
• v.4 no.2
• /
• pp.138-147
• /
• 1992

사출성형충전공정에서 금형구조가 단섬유배향에 미치는 영향을 예측하기 위하여 수 치모사 프로그램을 개발하였다. 유한요소 /관찰 부피 방법에 복잡한 금형에서의 유동을 해 석하고 섬유와 섬유간의 상호작용을 고려한 섬유배향텐서 변화식을 이용하여 입자 추적법으 로 섬유배향분포를 구하였다. 수치모사 결과 금형 옆벽면과 내부 방해체의 주위에 있는 섬 유들이 전단변형의 영향으로 그들주위를 따라서 정렬되려는 경향을 보였다, 두 유동이 내부 방해체를 지나 접하면서 생성된 웰드라인을 따라서 단섬유들이 정렬되려는 경향을 나타내엇 다. 그리고 수축유동에서는 흐름방향으로 정렬되나 확장유동에서는 흐름방향에 수직으로 배 열되려는 경향을 확인하였다. 위아래 벽에 의한 전단변형의 영향으로 서로 다른두 배향구조 를 보여주는 skin-core 구조를 두께방향의 속도구배를 고려한 수치모사를 통하여 예측할 수 있었다. skin구조에서는 섬유들이 흐름방향으로 정렬되고 core 구조에서는 흐름방향에 수직 으로 배향되는 것을 확인하였으며 섬유상호계수값이 커질수록 임의 배향화하는 경향을 보였다.

• The Korean Journal of Rheology
• /
• v.5 no.1
• /
• pp.49-64
• /
• 1993

사출성형충전공정에서 금형구조가 단섬유배향에 미치는 영향을 예측하기 위하여 수 치모사 프로그램을 개발하였다. 유한요소 /관찰 부피 방법에 복잡한 금형에서의 유동을 해 석하고 섬유와 섬유간의 상호작용을 고려한 섬유배향텐서 변화식을 이용하여 입자 추적법으 로 섬유배향분포를 구하였다. 수치모사 결과 금형 옆벽면과 내부 방해체의 주위에 있는 섬 유들이 전단변형의 영향으로 그들주위를 따라서 정렬되려는 경향을 보였다, 두 유동이 내부 방해체를 지나 접하면서 생성된 웰드라인을 따라서 단섬유들이 정렬되려는 경향을 나타내엇 다. 그리고 수축유동에서는 흐름방향으로 정렬되나 확장유동에서는 흐름방향에 수직으로 배 열되려는 경향을 확인하였다. 위아래 벽에 의한 전단변형의 영향으로 서로 다른두 배향구조 를 보여주는 skin-core 구조를 두께방향의 속도구배를 고려한 수치모사를 통하여 예측할 수 있었다. skin구조에서는 섬유들이 흐름방향으로 정렬되고 core 구조에서는 흐름방향에 수직 으로 배향되는 것을 확인하였으며 섬유상호계수값이 커질수록 임의 배향화하는 경향을 보였다.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.161-165
• /
• 2004

Safety and efficiency in the construction of RC structures mainly depends on optimal operation of shore-slat systems. The disasters in RC construction are mainly due to excessive load applied to falsework and premature removal of supports. Development of sufficient compressive strength of early-age connote is essential for the safety of structures during construction. Most of studies on shore-slab interaction have focused on flat slab structures. In this study, load distributions in floor slabs and supports during the construction of shear wall-type RC apartment building structures is investigated using finite element analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.279-286
• /
• 1999

Wall-bounded 유동과 달리 자유 전단 유동은 Hyperbolic Tangent Profile을 가지고 비점성 불안정에 의해 지배된다. 따라서 자유 전단 유동에서 난류로의 천이과정은 비점성 불안정성 이론에 의해 해석되어 진다. 본 연구는 분리판(Splitter plate)에 의해 분리된 속도가 다른 자유 유속의 혼합에 의해 형성되는 혼합층에서 와류병합과정에 대한 속도비의 영향에 대하여 연구한다. 속도비는, R, $ \frac{U_1-U_2}{U_1+U_2}$ 로 정의되며, 여기서 $U_1$은 분리판 위에서의 자유 유속을 그리고 $U_2$ 는 분리판 아래에서의 자유 유속을 나타낸다. 본 연구에서 와류구조의 병합작용을 분석하기 위하여 2차원 비정상 Large-Eddy Simulation 방법을 적용하였다. 속도비의 변화에 따라 혼합층에서 불안정 Wave가 성장하게 되고, 유체는 2차원 와류구조에서 Roll-up한다. 이러한 2차원 와류구조는 주위의 다른 와류구조와 상호작용을 하게 되고 하나의 커다란 와류구조를 형성하는 것을 볼 수 있다. 혼합층에서 와류병합과정은 반복적으로 일어나는 것을 알 수 있었고, 이 결과를 이용하여 혼합층의 성장을 제어할 수 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.1
• /
• pp.123-132
• /
• 1985

The flexibility of base material gives considerable influences on seismic responses of a structure. The effects of relative stiffness between super-structure and base material on dynamic soil-structure interaction are evaluated by parametric studies. Two 5-story buildings are used for the study; one is shearwall structure with relatively higher fundamental frequency and the other is frame structure with relatively lower fundamental frequency. The structures are modeled as beam-sticks coupled with springs and dashpots representing the base material. Dynamic equilibrium equations of the soil-structure interaction system are sloved by mode superposition method using Rosset modal damping values. Soil-structure interaction effect is found to be major concern in seismic analysis of shearwall structure in most cases while it seldom becomes engineering problem in frame-type structure. It is also found that seismic responses at lower elevation of the super-structure are amplified though they decrease at higher elevation as soil-structure interaction effects of the system increase.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.351-360
• /
• 2000

A simple numerical modelling technique is proposed for estimating the shear lag effects of framed-tube system with multiple internal tubes. The tube(s)-in-tube structure is analysed by using an analogy approach in which each tube is individually modelled by a beam that can accounts for the flexural and shear deformations, as well as the shear lag effects. The numerical analysis is based on the minimum potential energy principle in conjunction with the variational approach. The shear lag phenomenon of such structures is studied with additional bending stresses. Structural parameters governing the shear lag behaviour in tube(s)-in-tube structures are also investigated through thirty-three numerical examples.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1234-1243
• /
• 1990

Double coaxial are jets(annular and coaxial air jets) between which propane gas is fed was selected to study the structure of diffusion flames in turbulent shear flow. Schlieren and direct photographs are taken to visualize the flame structure. Mean and fluctuating temperatures and ion currents were measured to investigate the macroscopic and the instantaneous flame structure. The objective of this study is to understand the interaction between combustion and mixing process especially in the transition region of turbulent shear flow. The investigation reported in this paper focuses on the macroscopic and the instantaneous structures of three flames obtained. The increased mixing effect resulting from increase of Reynolds number of central air jet makes the flame bluish and short. When the velocity of surrounding air stream is higher than that of central air jet, the instantaneous flame structure is composed of coherent structure. It is considered that the flame structure of transitional region of mixing layer depends on the structure of mixing layer of non-reacting conditions.

• Korean journal of food and cookery science
• /
• v.4 no.1
• /
• pp.9-16
• /
• 1988

These experiments were carried out to study the factors affecting quality and textural characteristics in the preparation of artificial gluten meat (AGM). These results were compared with the raw beef on its properties. The results obtained were summarized as follows: 1, The affective factors on the color of AGM were walnut, oil, salt, onion, water, interactions of oil and water, and interactions of heating temperature and heating time. 2. Shear force was affected by the factors of walnut, onion, water and interactions of walnut and oil. 3. Walnut, oil, onion, salt, water, interactions of walnut and oil, interactions of oil and water, and heating temperature affected on hardness, springiness, cohesiveness and chewiness. 4. Walnut and water affected on the water holding capacity.

• Computational Structural Engineering
• /
• v.2 no.3
• /
• pp.85-95
• /
• 1989

This paper presents a study of soil-structure interaction problems using infinite elements. The infinite elements are formulated for homogeneous and layered soil media, based on approximate expressions for three components of propagating waves, namely the Rayleigh, compressive and shear waves. The integration scheme which was proposed for problems with single wave component by waves. The integration scheme which was proposed for problems with single wave component by Zenkiewicz is expanded to the multi-waves problem. Verifications are carried out on rigid circular footings which are placed on and embedded in elastic half space. Numerical analysis is performed for a containment structure of a nuclear power plant subjected to a horizontal seismic excitation.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.323-328
• /
• 2009

The rheological properties of complex materials such as polymer melts show complicated non-Newtonian flow phenomena when they are subjected to shear flow. These flow properties are controlled by the characteristics of flow units and the interactions among the flow segments. The non-Newtonian flow curves of poly(vinyl alcohol) hydrogel were obtained in various concentrations and temperatures by using a cone-plate rheometer. By applying non-Newtonian flow equation to the flow curves for PVA hydrogel samples, the rheological parameters were obtained. The PVA hydrogel samples are shear thinning under increasing shear rate modes which result in thixotropic behavior.