• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.929-933
• /
• 2003

Internal defects of thin pressure vessel used in the power plants or the chemical plants may be created and grow due to corrosion or creep fatigue to reduce the strength and cause critical failure during operation. Therefore it is very important to detect this defect at the early stage. For this purpose, non-destructive, non-contact and highly sensitive method should be considered for on-line application. In this paper, a laser shearographic interferometer is applied to inspect circular defects and notch defects existed inside of thin pressure vessel under the presence of pressure up to 3 times of atmospheric pressure. The influences of the defect shape and size as well as the internal pressure to the characteristic pattern in the shearography fringe are investigated, and the quantitative evaluation of the defect size is tried. Also the experimental results are compared with the destructive test results to show the applicability of this method to the quantitative evaluation of internal defects in the thin pressure vessel.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.9-16
• /
• 1997

In this paper, a newly radial electronic shearography system was developed in order to study vibration characteristics of symmetrical objects. We utilized the electro-optic holography theory for quantificational analysis and a porror prism for shearing two inages radially in this study. These image data obtained by this shearography give us various distributions of the gradient of vibration amplitude, and they are useful informations to study vibrational characteristics of symmetrical objects. Finally this developed system with phase stepping and modulation was applied to fans and disks to inspect characteristics of the vibration and the blance of symmetrical objects and obtained good results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.195-198
• /
• 2001

Backside defect of plate structure may grow due to fatigue or overload to cause critical failure during operation, so it is important to detect this kind of defect in line. For this purpose, nondestructive, non-contact and highly sensitive method is required. ESPI and Shearography are considered as useful method to satisfy these requirements. In this paper, the possibility of application of ESPI and Shearography to detect the backside defect of steel plate and to quantify the defect size was tested. For the experiment, some steel plates with defect on the backside were prepared. Experimental results for these plates showed that location and size of defect could be detected correctly by both of ESPI and Shearography.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.140-143
• /
• 2001

Digital shearography, a speckle pattern method is based on the superposition of two laterally sheared images. Therefore, object points which are positioned in some distance from each other are superposed in the image plane. This shearography, one of NDT methods without contact, is able to inspect defects in pipelines and pressure vessels that are used in nuclear power plants. This is can inspect whole fields and has a low sensitivity to environmental noise. Because optical setting is very simple, it has a little exhaustion of time, cost and man power. And also it can find a defect position through real time monitoring of a part. This paper, finds out the relationship among shearing quantity image quality and defect size with this method.

• Composites Research
• /
• 제15권5호
• /
• pp.19-26
• /
• 2002

본 연구에서는 레이저 계측시스템을 이용하여 복합재료 구조물의 실제결함을 검출하였다. 다양한 하중을 적용하여 충격에 의한 복합재료 적층판의 층간분리, 하니컴 구조에서의 접착분리, 복합재료 적층판의 자유단 층간분리, 그리고 접착조인트 구조의 접착부위 접착부위와 같은 네 종류의 시험편을 제작하였고 ESPI와 전단 간섭계의 레이저 계측시스템으로부터 결함을 검출하였다. 열하중 방법을 통하여 시험편의 표면에 변형을 쉽게 일으켜 결함을 검출하였다. 실험결과 복합재료 구조물의 실제결함을 ESPI와 전단 간섭계로부터 쉽게 검출하였으며 더 나아가 ESPI와 전단 간섭계로부터 다양한 종류의 복합재료 구조물의 결함을 검출하는데 있어서 유용하게 이용될 것으로 사료된다.

• 비파괴검사학회지
• /
• 제32권2호
• /
• pp.170-176
• /
• 2012

원자력 산업에 있어서 파이프의 감육결함은 수명평가 및 안전평가에 막대한 손실을 발생 할 수 있다. 비파괴검사 기법을 이용하여 변형, 진동, 결함 평가를 수행하고 있지만, 넓은 면적의 결함을 평가하는 기법이 적으며, 시간이 오래 걸리는 단점이 있다. 원자력 발전소의 2차계통에서 주로 사용되는 탄소강 배관을 대상으로 내부에 인공 감육결함을 가공하고 두께를 서로 다르게 하여 제작하여 Shearography를 이용하여 감육결함부의 변형을 측정하였다. 또한 광 계측을 통하여 변형, 진동, 결함 평가뿐만 아니라 압력용기의 결함깊이를 정량적으로 평가하고자 한다. 본 논문은 전단간섭계를 이용하여 파이프의 내부 감육 결함을 측정하고, 압력에 따른 변형을 제시한 기법을 이용하여 정량적인 결함의 잉여두께를 평가하고자 한다. 변형량을 이용하여 잉여두께 예측결과 실제 결함깊이와 약 7%의 오차로 신뢰성을 확보하였으며, 압력에 따른 변형량과 잉여두께의 DB구축을 통하여 원전 배관의 감육부 건전성 평가에 활용될 수 있을 것이다. 따라서, 본 연구에서 제안하는 압력용기 결함깊이 측정법은 원자력배관의 감육결함 예측 및 건정성 평가 기술 개발 등 이론과 실험이 결함된 기초연구로서 압력용기의 안정성, 건전성, 보수성을 증진시킬 수 있는 기반확립에 기여할 것으로 기대한다.

• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.97-104
• /
• 2009

There is a many kinds with nondestructive testing such as RT and UT representatively. Referred before two testing methods there is a limit which is spatial such as nuclear pipe, small vessel, sealing up vessel. So a new technique needs to overcome the limit which is spatial. shearography will be able to overcome the limit which is spatial. This paper introducing shearography which was known as non-contact full-field testing method and It is an interferometric technique for measurement of surface deformation such as displacement or displacement gradient. Also, a research about internal defect of the flange welding zone was accomplished. About variation with method pressurized with the Gaseous Nitrogen. Phase map where is various were measured according to changing a sheared direction, size of crack and loaded pressure. Consequently, crack quantitatively to be detected qualitatively was measured by using shearography.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.701-702
• /
• 2008

• 한국기계가공학회지
• /
• 제20권4호
• /
• pp.39-48
• /
• 2021

In this paper, an in-plane deformation measuring system using a dual-beam shear interferometer was constructed to measure the in-plane deformation of the measuring object. The in-plane deformation of the object was quantitatively measured according to the load and surface treatment conditions of the object. We also verified the reliability of the proposed technique by simultaneously performing the technique with an electronic speckle pattern interferometry system (ESPI), which is another laser application measurement technology. Digital shearography directly measures the deformation gradient or strain components and has the advantages of being full-field, noncontact, highly sensitive, and robust. It offers a much higher measurement sensitivity compared with noncoherent measurement methods and is more robust and applicable to in-field tests.

• 한국공작기계학회논문집
• /
• 제10권2호
• /
• pp.29-37
• /
• 2001

The application of laser in pipelines was started from the base of using laser in nuclear facilities industries and power plants. Because laser can be delivered to a remote area without any difficulties, the application of laser in many industries can solve many difficulties from limitation of access in danger area and reduced the risks of workers. Therefore, we developed a new experimental technique to measure internal defects of pressure vessels with a combination of shearog-raphy and image processing technique. Conventional NDT methods have been taken relatively much time, money and manpower because of performing as the method of contact with objects to be inspected. But digital shearography is laser-based optical method which allows full-field observation of surface displacement derivatives. This method has many advantages in practical use, such as low sensitivity to environmental noise, simple optical configuration and real time mea-surement. In this paper, we find the optimum shearing magnitude with EFM and experiment and measured internal crack length of the pressure vessels at a real time and estimated the error of the results.