• Journal of Advanced Marine Engineering and Technology
• /
• 제37권6호
• /
• pp.596-602
• /
• 2013

기존의 진동에너지 하베스터는 한 주파수에서의 공진현상을 이용하여 에너지를 얻기 때문에 고정된 단일 주파수를 갖는 진동에너지로부터 전기에너지를 변환하는데 최적이지만 다양한 주파수를 포함하고 있는 파도와 같은 상하진동 에너지원으로부터 전기에너지를 얻는 데에는 한계가 있다. 본 논문에서는 이러한 단점을 해결하기위해 파도가 갖는 무한한 상하진동 에너지로부터 전기에너지를 얻는 광대역 진동에너지 하베스터를 연구하였다. 광대역 진동에너지 하베스터는 부양체와 진동에너지 하베스터가 각각 파도에너지가 갖는 중심주파수에서 공진이 발생되도록 구성되어있다. 그 결과 기존 공진을 이용한 진동에너지 하베스터는 한 주파수에서만 진동에너지를 전기에너지로 변환할 때 효율을 극대화할 수 있는 반면, 제안한 방법은 다양한 주파수를 포함하고 있는 파도에너지로부터 전기에너지로 변환할 때도 효율을 극대화 할 수 있는 장점을 가진다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.147-150
• /
• 2002

Domestic electrical construction inspection system was introduced into building site in 1963 by registered architects' law, meanwhile, inspector appointed by ministry of owners lake charge of Government managing building site. Afterwards several systems has been adopted to heal some problems each of them has revealed. These times Government granted authority for inspection on surveillancer, furthermore, formulate a supervising system which articulate the responsibilities of supervision and put it in effect as of 1st, January, 1994. This supervision system gets rid of factors causing faulty work to a considerable extent. However, as it is still in early stage, the system has various problems to overcome, For example, actual state of handling modifications of design in accordance with supervision system in field shows a difference between process provided by law and field process. Thus this study inquire and analyze actual condition of supervision system, at the same time, problems occuring in modifications of design under supervision, and then propose a way to improve it

• 대한전기학회논문지
• /
• 제35권11호
• /
• pp.479-486
• /
• 1986

It is necessary to consider a rotor movement in dynamic analysis on the flux distribution of electric machinery by FEM. Therefore, if air-gap domain was subdivided into triangular elements, computation results contain errors due to variation of element shape in air-gap because the nodal points corresponding to the rotor are displaced in analyzing domain for the time difference. In order to reduce this errors, the paper presents a application of a Macro Air-gap Element that interpolation function is obtained analytically and a means to join it with linear triangular elements in the rotating machine or in the linear machine. At the end of paper, setting up analytic domain model, it compares analytic solution with the computation results of Macro Air-gap Element appliction and that of linear triangular element subdivision only to each cases of nodal displacement. And it carries out that errors due to variation of element shape are reduced effectively by application of a Macro air-gap element.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.414-419
• /
• 2002

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were simulated by Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of (idled specimens with treating silane, the breakdown strength become much higher Finally, from the analysis of weibull distribution, it was confirmed that as the allowed breakdown probability was given by 0.1[%], the applied field value needed to be under 21.5 MV/cm.

• 한국전기전자재료학회논문지
• /
• 제11권2호
• /
• pp.162-166
• /
• 1998

Synthetic fluid, class 7 group 2, as an insulating and cooling material is selected as. specimen, arid it is studied for the physical and electrical properties. Also, Benzotriazole(following as BT A) known as a suppressant of streaming electrification is added to it, and the change of physical and electrical properties by addition of BT A is investigated. From the spectrum of FT-IR, it is confirmed that the absorption peak in wavenumbers $3400{\sim}3450[cm^{-1}]$ is small or disappears when BTA is added. AC breakdown strength and volume resistivity of each specimen are investigated. It is considered that the effective content of BTA is about 10[ppm] for the suppression of electrification in this experiment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.212-217
• /
• 2002

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were simulated by Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher Finally, from the analysis of weibull distribution, it was confirmed that as the allowed breakdown probability was given by 0.1[%], the applied field value needed to be under 21.5 MV/cm.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권1호
• /
• pp.23-29
• /
• 2001

A BLDC motor has a serious drawback that torque pulsation is generated in every commutation period though it has many advatages compared to the conventional DC Motor. In this paper, the influence of commutation time on torque pulsation is studied. Generally in calculating the torque of BLDC motor, it is assumed that the decaying phase back EMF is constant, but the torque model considering decaying phase back EMF is introduced here. Through it, the torque in commutation period has torque pulsation component caused by commutation itself and it cannot be removed perfectly even if there is no current pulsation. To reduce the torque pulsation, a new method is proposed, which controls a point of commutation and the optimal point of commutation is found. Simulation shows that proposed method reduces the torque pulsation considerately.

• 기술사
• /
• 제34권5호
• /
• pp.40-43
• /
• 2001

상암동 월드컵 주정기장은 축구 전용경기장으로서 2002년 월드컵 축구경기를 위한 꿈과 감동의 라이브 스테이지로서의 스타디움 시설로 각종 국내외 축구경기는 물론 문화행사를 효율적으로 운영할 수 있도록 계획되었다. 이에 효율적인 경기장 시스템 구성과 적정한 전기시설물 설치로 최상의 경기운영을 할 수 있도록 전력시스템을 안정화 하였으며, 월드컵 경기 이후 스포츠공간과 상업시설, 공공시설 등 복합화된 스포츠 문화시설에 부합할 수 있도록 수변전 설비 및 방재센타 등을 다분화하여 시설하였으며 국제적 행사의 장에 전기인으로서 일익을 담당할 수 있었음에 감사한 마음이다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2013년도 춘계학술대회 논문집
• /
• pp.37-37
• /
• 2013

무전해도금법 (electroless plating)은 Brenner와 Riddell이 1946년에 처음으로 환원제를 이용한 금속의 침적을 electroless plating이라고 명명한 뒤 전기를 이용하지 않고 금속막을 얻을 수 있는 방법으로 인지되어왔다. 초기에는 용액이 불안정하였으나 용액의 안정성을 향상시키면서 꾸준히 산업체에 쓰여왔다. 무전해도금의 응용이 처음에는 니켈에 국한되었으나 구리의 무전해도금이 PCB에 사용되면서 80년대부터 전자산업에서 많이 쓰이게 되었다. 최근에는 무전해도금을 이용한 전자산업뿐만 아니라 MEMS와 같이 전기도금을 위한 전기접촉이 어려우면서 정밀한 균일도를 요구하는 분야에도 많이 쓰이고 있다. 본 발표에서는 무전해도금법의 일반적인 원리와 이를 이용한 IT 산업에서의 응용에 대하여 알아본다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.629-632
• /
• 1999

For replacing Li metal ai Lithium ton Bakery(LIB) system. we used carbon powder material which prepared by pyrolysis of phenol resin as starting material. It became amorphous carbon by pyrolysis through it\`s self condensation by thermal treatment. Amorphous carbon can be doped with Li intercalation and deintercalation because it has wide interlayer. however it has a problem with structural destroy causing weak carbon-carbon bond. So. we used ZnCl$_2$ as the pore-forming agent. This inorganic salt used together with the resin serves not only as the pore-forming agent to form open pores, which grow Into a three-dimensional network structure in the cured material, foul also as the microstructure-controlling agent to form a loose structure dope with bulky dopants. We analyzed SEM in order to find to different of structure. and can calculate distance of interlayer. CV test showed oxidation and reduction