• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.629-632
• /
• 1999

For replacing Li metal ai Lithium ton Bakery(LIB) system. we used carbon powder material which prepared by pyrolysis of phenol resin as starting material. It became amorphous carbon by pyrolysis through it\`s self condensation by thermal treatment. Amorphous carbon can be doped with Li intercalation and deintercalation because it has wide interlayer. however it has a problem with structural destroy causing weak carbon-carbon bond. So. we used ZnCl$_2$ as the pore-forming agent. This inorganic salt used together with the resin serves not only as the pore-forming agent to form open pores, which grow Into a three-dimensional network structure in the cured material, foul also as the microstructure-controlling agent to form a loose structure dope with bulky dopants. We analyzed SEM in order to find to different of structure. and can calculate distance of interlayer. CV test showed oxidation and reduction

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.5
• /
• pp.361-365
• /
• 2019

Although there is no strict definition of a power semiconductor device, a general description is a semiconductor that has capability to control more than 1 W of electricity. Integrated gate bipolar transistors (IGBTs), which are power semiconductors, are widely used in voltage ranges above 300 V and are especially popular in high-efficiency, high-speed power systems. In this paper, the size of the gate was adjusted to test the variation in the yield voltage characteristics by measuring the electric field concentration under the trench gate. After the experiment Synopsys' TCAD was used to analyze the efficiency of threshold voltage, on-state voltage drop, and breakdown voltage by measuring the P- region and its size under the gate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.4
• /
• pp.385-390
• /
• 2023

In this paper, the 1,700 V level SiC-based power MOSFET device widely used in electric vehicles and new energy industries was designed, that is, a single trench gate power MOSFET structure and a double trench gate power MOSFET structure were proposed to analyze electrical characteristics while changing the design and process parameters. As a result of comparing and analyzing the two structures, it can be seen that the double trench gate structure shows quite excellent characteristics according to the concentration of the drift layer, and the breakdown voltage characteristics according to the depth of the drift layer also show excellent characteristics of 200 V or more. Among them, the trench gate power MOSFET device can be applied not only to the 1,700 V class but also to a voltage range above it, and it is believed that it can replace all Si devices currently applied to electric vehicles and new energy industries.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.41-46
• /
• 2004

최근, 피뢰설비에 대한 수요는 정보통신 등 IT산업의 발전으로 인해 기하급수적으로 성장하고 있다. 21C로 접어들면서 세계는 정보통신기술의 발달을 통해 세계를 하나의 지구촌으로 만들었으며, 모든 물품과 서비스의 표준화로 세계 모든 사람들이 쓰는 물품과 행동양식을 하나의 표준(글로벌 스탠더드)으로 통일화해 나가고 있다. (중략)

• 전기의세계
• /
• v.53 no.4
• /
• pp.44-51
• /
• 2004

최근 산업 및 가정에서 소비가 급증되고 있는 전력수요를 충족시키고, 또한 전력 계통의 안정적인 운전을 도모하기 위하여 전력 계통 및 전력 설비들의 공급 전압 규모는 초고압화로 승압 되고 있으며, 설비의 규모는 대형화로 되는 것이 현재의 추세이다. 이러한 배경으로 인하여, 전력 설비에 대한 전기적인 절연특성을 확보하면서 경제적인 비용 절감이 가능한 설비 외형 규모의 콤팩트화를 위하여 선진외국을 비롯하여 국내에서도 투자를 아끼지 않고 있다.(중략)

• Resources Recycling
• /
• v.26 no.3
• /
• pp.17-25
• /
• 2017

Electric arc furnace steelmaking dust has various physicochemical properties as volatile components generated in the melting process of steel scraps in an electric arc furnace, which is captured in oxide form as fine powder by reacting with oxygen in the air. In order to efficiently recycle these electric arc furnace dust, a kinetic basic experiment and a pilot production test were carried out in parallel. As a result, it was found that the electric arc furnace dust contain a large amount of Cl and alkali components, thus it was expected that the compounds have a great adverse effect on the actual operation for the recycling. It was confirmed that the volatilization behavior was progressing actively at $1100^{\circ}C$ and the electric arc furnace dust was melted at $1250^{\circ}C$. These results are the same as a result of pilot test for the formation behavior of zinc oxide and reduced iron. These results should be useful as basic data for designing the recycling plant of the electric arc furnace dust and establishing the operating conditions.

• Journal of Korean Institute of Fire Investigation
• /
• v.10 no.1
• /
• pp.47-57
• /
• 2007

If it were the occurrence of fire by electricity with the rapid growth of economy, it would be serious damage for nation that effect human life and properties. To prevent electrical fires, it was basic countermeasure that make detail statistics classified by the source, place etc. with examining correct cause of fire. In this paper, we analuzed the present condition of fire occurrence of the lastest ten years and classified fires by the source, place, month in 2006. In addition our corporation staff execute in-depth and professional research on the actual state of electrics fire by visiting fire stations fire of the whole country for 8,554 electric fires in 2005. I expect this thesis to be used for preventing electric fires and providing a stepping stone on correct production of fire statistics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.426-432
• /
• 2021

Injection molding is used in many industrial fields such as home appliances, vehicle parts, and electronic device parts because various resins can be molded, leading to mass production of complex shapes. Generally, the empirical prediction method is used to set the initial processing conditions of injection molding. However, this approach requires a lot of cost and its presented solution is not accurate. In this paper, injection molding was simulated through the Moldflow^TM in order to manufacture the spacer for gas insulated switch. Through the simulation, the flow of the resin with respect to the diameter of the inlet was analyzed. It was found that the process was possible at a higher resin temperature as the diameter of the inlet increased. In addition, through thermal analysis during injection of the resin, it was confirmed that a stagnation phenomenon occurred at the insert portion during injection molding, and the temperature of the resin was higher than that of the mold. As in this paper, if the spacer is manufactured by optimizing the injection hole and the temperature of the injection process based on simulation, it is expected that the spacer can be manufactured with high productivity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1213-1217
• /
• 2011

Electric stimulators are used for various treatments, such as for pain relief and to improve rehabilitation in and out of the hospital. However, if the stimulation pulse affects the patient's heart, it can cause critical cardiac disorders such as arrhythmia or ventricular fibrillation. As a result, it must be ensured that the transmission length of the stimulation pulse does not exceed the proper range in the design of an electric stimulator. Furthermore, every anticipated risk factor must be monitored in in-vitro and in-vivo experiments. A new stimulator was designed to supply continuous 0.001 J stimulation pulses at a rate of 60 pulses per second. To evaluate the safety of the new electric stimulator and to measure its energy transfer and pulse transmission length, we built a conduction model that was filled with saline and measured the electric field at various positions in response to real stimulations. In an animal experiment with two pigs, heart disorders were induced by applying electric stimulation to tissues near the heart. These heart disorders were different from the result obtained with 9 V DC stimulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.100-100
• /
• 2009

ZnO 바리스터는 정전기 및 순간적인 surge로부터 전자기기 및 전자회로 등을 보호하기 위해 개발된 전자 세라믹스 소재이다. 최근 전자기기 등의 고속통신 추세에 따라 ZnO 바리스터는 높은 비선형 특성과 함께 보다 낮은 유전율 및 유전손실 특성이 특별히 요구되고 있다. 따라서 본 연구에서는 현재 양산되고 있는 Bi-계와 Pr-계 ZnO 바리스터가 아닌 새로운 조성계를 이용하여 Y 첨가량(0.1~3.0 at%)에 따른 ZnO 바리스터의 전기적 특성과 유전 특성을 살펴보았다. 시편은 일반적인 세라믹 공정에 따라 제조하여 $1200^{\circ}C$에서 3 시간 공기 중에서 소결하였으며, 소결 및 전기적 특성과 유전 특성(밀도, 미세구조, I-V 특성, 유전율, 유전손실, ZnO grain 비저항)은 FE-SEM, Keithley237, Agilent 4294a 및 Agilent 4991a 장비를 사용하여 Y 함량에 따른 ZnO 바리스터의 특성 변화를 고찰하였다. 그 결과, Y이 2.0 at% 첨가한 계의 바리스터 특성이 가장 우수하였다. 보다 구체적으로 살펴보면 다음과 같다. Y 함량이 증가함에 따라 상대밀도는 94~96%로 증가하였으며, 평균입경은 증가하였다. 또한 유전율은 580~215 (at 1 MHz)로 Y 함량이 증가할수록 낮아졌다. 이를 통하여 새로운 바리스터 조성계에서 Y의 첨가 효과에 대하여 논하였다.