• 전력전자학회논문지
• /
• 제20권4호
• /
• pp.375-387
• /
• 2015

This study investigates an economic and highly efficient power-converter topology and its modulation scheme for 60 kW rapid EV charger system. The target system is a three-phase three-switch buck-type rectifier topology. A new carrier-based PWM scheme, which is characterized by simple implementation using logic gates, is introduced in this paper. This PWM scheme replaces the diode rectifier equivalent switching state with an active switching state to produce the same effective current flowing path. As a result, the distortion of input current during the polarity reversal of capacitor line voltage can be mitigated. The proposed modulation technique is confirmed through simulation verification. The proposed modulation technique and its implementation scheme can expand the operation range of the three-phase three-switch buck-type rectifier with high-quality AC input and capacitor ripple current.

• 에너지공학
• /
• 제26권1호
• /
• pp.28-33
• /
• 2017

액화질소 엔진은 유해 배출물질을 전혀 배출하지 않는 고청정 동력기관이며, 에너지 밀도면에서 배터리에 비해 크기 때문에 전기자동차에 대한 경쟁력을 가지고 있다. 기존의 액화질소 엔진은 주로 왕복동 방식에 국한되어 왔다. 본 논문에서는 스크롤 팽창기를 적용하는 액화질소 엔진의 개념을 도입하였다. 스크롤 팽창기를 엔진에 적용할 경우 엔진 효율이 증가할 수 있고, 구조의 단순화 구현이 가능하여 기존 왕복동 방식 엔진에 비해 기술적, 경제적 경쟁력을 가질 수 있다. 본 연구에서는 액체 질소 분사압력을 변화시키면서 스크롤 팽창기가 적용된 액화질소 엔진의 성능을 분석하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.401-402
• /
• 2015

In this paper a direct cell-to-cell charge balancing circuit which can transfer the charge from any cell to any cell in the battery string is introduced. In the proposed topology the energy in the high voltage cell is transferred to the low voltage cell through the simple operation of a dc-dc converter to get fast equalization. Furthermore, the charge equalization can be performed regardless of the battery module operation whether it is being charged, discharged or relaxed. The monitoring circuit composed of a DSP and a battery monitoring IC is designed to monitor the cell voltage and protect the battery. In order to demonstrate the advantages of the proposed topology, a prototype circuit was designed and applied to 12 Lithium-Ion battery module. It has been verified with the experiments that the charge equalization time of the proposed method was shortest compared with those of other methods.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.25-26
• /
• 2015

Inductive Power Transfer (IPT) method becomes more and more popular for the Electric Vehicle (EV) battery charger due to its convenience and safety in comparison with plugged-in charger. In recent years, Lithium batteries are increasingly used in EVs and Constant Current/Constant Voltage (CC/CV) charge needs to be adopted for the high efficiency charge. However, it is not easy to design the IPT Battery Charger which can charge the battery with CC/CV charge under the wide range of load variation due to the wide range of variation in its operating frequency. This paper propose a new design and control method which makes it possible to implement the CC/CV mode charge with minimum frequency variation (less than 1kHz) during all over the charge process. A 6.6kW prototype charge has been implemented and 96.1% efficiency was achieved with 20cm air gap between the coils.

• Corrosion Science and Technology
• /
• 제21권5호
• /
• pp.348-359
• /
• 2022

Interest in electric vehicle is on the rise due to global eco-friendly policies. To improve the efficiency of electric vehicles, it is essential to reduce weights of components. Since electric vehicles have various electronic equipment, the research on stray current corrosion is required. In this research, a galvanostatic corrosion experiment was performed on 6061-T6 Al alloy for electric vehicle battery housing using chloride concentration and applied current density as variables in a solution simulating an acid rain environment. As a result of the experiment, when chloride concentration and applied current density were increased, corrosion damage became larger. In particular, pitting damage was dominant at an applied current density of 0.1 mA/cm². Pitting damage over the entire surface was found at a current density of 1.0 mA/cm². In conclusion, chloride concentration had a relatively large effect on localized corrosion. The applied current density had a great effect on uniform corrosion. However, in the case of applied current density, localized corrosion was also greatly affected by interaction with chloride.

• 공업화학
• /
• 제23권3호
• /
• pp.247-252
• /
• 2012

전기자동차, 하이브리드 자동차의 필요성과 스마트 IT 기기의 급속한 발전으로 인한 고용량 고출력 전지의 수요가 급증하고 있다. 현재 상용화 된 리튬이온전지는 기술적 문제에 의해 제한된 에너지 밀도만이 이용되고 있어서 보다 높은 에너지 밀도를 갖는 리튬-황 및 리튬-공기전지 개발이 주목 받고 있다. 새로운 Li 배터리 시스템의 양극물질인 황과 산소는 유사한 물리화학적 특성을 갖고 풍부한 자원 매장량으로 상용화가 어렵지 않을 것으로 전망한다. 따라서 본 총설에서는 리튬-황 및 리튬-공기 전지 시스템의 다공성 구조 양극개발, 양극과 전해질의 계면반응 최적화 및 높은 내구성이 있는 리튬음극 개발과 같은 공통 이슈를 해결하고자 하는 비전을 제시하고자 한다.

• 전기학회논문지P
• /
• 제63권1호
• /
• pp.40-45
• /
• 2014

This study examines the system and process of battery stored energy in vehicles and suggest the effective area for the use of V2G(vehicle-to-grid) from Jeju Smart Grid Demonstration Project. V2G means technology of electric power transmission from the battery of electric-drive vehicles to state grid. As for the increasing of effectiveness for demand-side control, V2G is a very good alternative. In the U.S., the utilization of electric vehicles is under 40% on average. In this case, we can use he battery of electric vehicle as role of frequency regulation or generator of demand-side resource. V2G, which is the element of Smart Transportation, consists of electric vehicle battery, BMS(battery management system), OBC(on-board charger), charging infrastructure, NOC(network operating center) and TOC(total operation center). V2G application has been tested for frequency regulation to secure the economical efficiency in the United States. In this case, the battery cycle life is not verified its disadvantage. On the other hand, Demand Response is required by low c-rate of battery in electric vehicle and It can be small impact on the battery cycle life. This paper concludes business area of demand response is more useful than frequency regulation in V2G application of electric vehicles in Korea. This provides the opportunity to create a new business for power grid administrator with VPP(virtual power plant).

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1889-1894
• /
• 2017

Global automobile manufacturers are developing electric vehicles (EVs) to eliminate the pollutant emissions from internal combustion vehicles and to minimize fossil fuel consumptions for the future generations. However, EVs have a disadvantage of shorter traveling distance than that of conventional vehicles. To answer this shortfall, more batteries are installed in the EV to satisfy the consumer expectation for the driving range. However, as the energy capacity of the battery mounted in the EV increases, the amount of heat generated by each cell also increases. Naturally, a better battery thermal management system (BTMS) is required to control the temperature of the cells efficiently because the appropriate thermal environment of the cells greatly affects the power output from the battery pack. Typically, the BTMS is divided into an active and a passive system depending on the energy usage of the thermal management system. Heat exchange materials usually include gas and liquid, semiconductor devices and phase change material (PCM). In this study, an application of PCM for a BTMS was investigated to maintain an optimal battery operating temperature range by utilizing characteristics of a PCM, which can accumulate large amounts of latent heat. The system was modeled using Dymola from Dassault Systems, a multi-physics simulation tool. In order to compare the relative performance, the BTMS with the PCM and without the PCM were modeled and the same battery charge/discharge scenarios were simulated. Number of analysis were conducted to compare the battery cooling performance between the model with the aluminum case and PCM and the model with the aluminum case only.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1071-1081
• /
• 2022

As the demand for high-rise buildings increases, the demand for high-speed elevators is also increasing. In order to make a high-speed elevator, a method is needed to reduce the weight of the elevator's components, which is a constraint on the increase in speed. As a measure to reduce the weight, it is possible to remove the traveling cable for power and signal supply. Since the weight of the traveling cable varies depending on the position of the carriage, it is difficult to compensate the weight using the counter weight. The power supply is a structure in which a brush-rail type power input terminal is installed in the elevator hoistway to receive power in a contact-type manner while the carriage is moving. If a small-capacity ESS is installed in a passenger car, power can be supplied uninterruptedly inside the passenger car. A small-capacity ESS charging system to be applied to such an elevator system is required to perform several functions. First, the passenger Car must be able to charge as much as possible even during high-speed operation. A control algorithm with high responsiveness is required because charging starts and ends repeatedly by the partially installed input power stage. In addition, if the input-side line impedance is large due to the structure of the system and the response characteristic is increased, the stability of the system may be lowered. Accordingly, in this paper, we propose a control algorithm that has a stable steady-state output while having a fast response in a transient state. To verify the proposed control algorithm, simulation was conducted using PSIM, and the performance of the controller was verified by manufacturing a prototype buck conveter charger.

• 자원리싸이클링
• /
• 제33권1호
• /
• pp.58-68
• /
• 2024

핵심광물인 니켈, 코발트, 리튬은 NCM계 리튬이온배터리(이하 LIB)의 양극소재로 알려져 있다. 탄소중립 기조에 따라 전기자동차의 보급량 증가로 핵심광물 수요도 증가할 것으로 예상된다. 하지만, LIB용 핵심광물 Li, Co, Ni의 수요대비 공급 부족으로 인해, 폐리튬이온배터리(EOL LIB)의 리싸이클링 수요가 증가할 것으로 예상된다. EOL LIB(폐 LIB) 재활용은 유해화학물질 무기산 침출제인 염산(HCl), 질산(HNO₃), 황산(H₂SO₄)을 침출공정에 적용하여 재활용한다. 본 연구에서는 친환경 대체침출제 메탄술폰산(이하 MSA)의 적용 가능성을 검토하였다. 또한, 침출제 농도, 환원제 농도, 침출시간, 광액농도(P/D), 온도 등의 침출인자가 NCM Black mass 침출에 미치는 영향을 연구하였다. 침출실험 결과, 침출제와 환원제 농도, 침출시간, 침출온도가 증가함에 따라 목적금속 Ni, Li, Co, Mn의 침출률이 향상됨을 확인하였고, 금속의 최대 침출률은 80℃에서 99% 이상으로 나타났다. 또한, MSA는 NCM Black mass 대상 침출에 적용하여 Ni, Li, Co, Mn을 회수할 수 있음을 확인하였다.