• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.129-134
• /
• 2017

In the present society, our current technology associated with bakery industry has been improved as much as technical development can get abreast of the Western one where the bread has originated and has been awarded and ranked in the highest level of many bakery or pastry competitions. In these trends, many people are running for high value added business such as bakery industry and bakery $caf{\acute{e}}$, etc. with big interest. However, high labor cost of technician and difficulties in human resource management become obstruction factors in the growth of the bakery industries. Therefore, in this paper, the designed system for both dividing and rounding dough quickly and exactly at the same time was studied. The main function of this system is to divide the original dough into 3 tracks and then, to place 4 doughs in the inner track, 12 doughs in the mid track, 20 doughs in the outer track, totally 36 doughs in a routine. It takes much energy because 36 doughs can be completed in a routine. Therefore, this system uses hydraulic pressure and a 0.75Kw induction motor is used for dough rounding. This system can make primarily fermented dough into 36 divided doughs very quickly and exactly on a guide panel at the desired weight by dividing it within 1-9 seconds and by rounding each within 1-9 seconds. This system is very effective in bakery industry to minimize labor cost and it is expected to supply more hygienic products to the customers.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.65-72
• /
• 2001

This paper deals with a novel full digital control of the single-phase PWM(Pulse Width Modulation) inviter for UPS(Uninterruptible Power Supp1y). The voltage and current of output filter capacitor as a state variable are the feedback control input. In the proposed scheme a double deadbeat control consisting of minor current control loop and major voltage control loop have been developed In addition, a second order deadbeat currents control which should be exactly equal to its reference in two sampling time without error and overshoot is proposed to remove the influence of the calculation time delay. The load current prediction is achieved to compensate the load disturbance. The simulation and experimental result shows that the proposed system offers an output voltage with THD(Total Harmonic Distortion) less than 5% at a full nonlinear load.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.66-74
• /
• 2002

OFDM(Orthogonal Frequency Division Multiplexing)is a one of the nst promising digital modulation techniques adapted for Digital audio broadcasting or Digital TV since it is very robust against multipath fading channels. From 1997, since the OFDM technique was considered as the physical layer standard for the high data rate wireless LAN systems in the 5㎓ band, related studies have been studied actively. The key element to implement high data rate wireless LAN system using OFDM technique are IFFT and FFT modules. In this paper, new IFFT and FFT module are designed and implemented using current cut circuit based on the matrix-rounding process for the low-power consumptive operation and high-speed data processing. In addition to, we certify the available operation of the rounded IFFT/FFT module in the AWGN channel by using the BER performance simulation of IEEE 802.11TGa based OFDM modem with rounded IFFT/FFT module.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.51-51
• /
• 2009

Thin Cross 초음파모터의 구조는 그림 1(a)와 같이 크로스형태의 얇은 스테이터에 윗면과 아랫면에 각각 8개의 압전세라믹이 부착된 형태이다. 압전세라믹의 분극방향은 로터와 접촉하는 스테이터의 중심부인 네 개의 타 점에서 순차적인 타원변위가 생성되도록 결정된다. 유한요소해석프로그램인 ATILA 5.2.4를 사용하여 최적설계된 모델을 제작하였고, 푸쉬풀 게이지, x-y 스테이지, rpm 메타, 토크 게이지를 이용하여 구동시스템을 구성하였다. 그림 1(b)는 마이크로컨트롤러(ATmega)를 이용한 구동 드라이버를 보여준다. 한 주기에서 1/4분주의 순차적인 네 개 의 구형파를 생성하고, 이를 push-pull회로를 통하여 90도의 위상차가 나는 정현파를 생성하여 초음파 모터의 구동 전원으로 사용한다. 피드백 회로인 맨코더와 AD 컨버터는 정속도 운전을 위해서 사용되었다. 제안된 구동드라이버를 이용하여 측정한 결과, 기존의 제품화된 드라이버와 비교하여도 특성의 큰 차이를 보이지 않았으며 피드백 회로를 통하여 부하변화에 따른 속도의 극심한 변화를 비교적 안정화 시킬 수 있었다. 입력전압을 증가시킬수록 속도는 선형적인 증가를 보였고 토크는 이와 반대로 감소하는 특성을 보였다. 피드백 제어회로가 없는 경우에는 프리로드 변화에 따른 극심한 속도 변화를 보였고, 피드백 제어를 하였을 경우에는 0.2~0.4[N]의 범위에서 정속도 운전이 가능함을 확인하였으며, 장시간의 운전에도 온도 및 속도특성이 안정적인 특성을 보였다.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.4
• /
• pp.185-192
• /
• 2005

This paper proposes a DRMS(Distribution Remote Management System) which can enhance highly the economics of automatic metering system and the power quality supplied to the electric customer improving the efficiency of the meter reading, voltage management and load management work by realizing the remote meter reading, the remote voltage management and the remote load management based on the ADWHM(Advanced Digital Watt Hour Meter). The DRMS is designed so that the voltage management and load management work in remote site can be processed by collecting the voltage pattern and current pattern as well as watt hour data from all ADWHMs one time every month regularly or from special ADWHMS several time irregularly, A new on-line voltage and load management strategy based on the ADWHM is designed by analyzing the existing voltage management and load management process. Also, DRMS is designed so that watt-hour data, voltage pattern data, load pattern data and power factor data can be collected selectively according to the selection of user to assist effectively the methodology. Remote management program and database of the DRMS are implemented based on Visual C++, MFC and database library of MS. Also, DRMS is designed so as to communicate with the ADWHM using RS232C-TCP/IP converter and ADSL. The effectiveness of the remote metering function is proven by collecting and analyzing the data after ADWHMs installed in any site. The developed strategy and program also is verified through the simulation of voltage management and load management.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.97-105
• /
• 2008

The micro capacitors are passive elements necessary to electronic circuits and wireless portable PAN(personal area network) and Mobile Communications device modules in the baseband circuits in combination with another passive and active devices. As capacitance is proportionally increased with dielectric constant and electrode areas, in addition, inversely decreased the thickness of the dielectric material, thus thin film capacitors are generally seen as a preferable means to achieve high performance and thin film capacitors are used in a variety of functional circuit devices. In this paper, propose dielectric material as AIN(Aluminium nitride) to make micro thin film capacitor, and this capacitor has the MIM(metal-insulator-metal) structure. AIN thin films are widespread applied because they had more excellent properties such as chemical stability, high thermal conductivity, electrical isolation and so on. In addition, AIN films show low frequency response for baseband signal ranges, I-V and C-V electrical characterization of a thin film micro capacitor. The above experimental test and estimated results demonstrate that the thin film capacitor has sufficient and efficient functional performance to be the baseband range frequency of general electronics circuit and passive device applications.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.699-705
• /
• 2022

Purpose: Sequence control is widely used by being applied to manufacturing, distribution, construction, and automation in the medical industry. With the development of the fourth industry, artificial intelligence convergence technology in the control field is becoming an important factor in the industry. In particular, it is required to evaluate the safety and innovation of facilities where microprocessors and artificial intelligence are fused to existing systems and develop reliable equipment, so it is intended to develop equipment for educational purposes and drive the development of the field. Method: The self-developed all-in-one artificial intelligence controller module is a device that combines artificial intelligence capabilities with existing sequence and PLC control circuits. As the performance evaluation items of this equipment, the recognition ability of motion, voice, text, color, etc. and the stability and reliability of the circuit were evaluated. Conclusion: After designing the sequence and PLC circuit, the performance evaluation items of the integrated integrated artificial intelligence controller module were all satisfied, and there was no problem in the safety and reliability of the circuit.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.94-100
• /
• 2017

In this paper, we suggest a design method of a metamaterial-based low-profile antenna working at 425 MHz for LEO/Cube satellites. Satellites play an important role in linking th remote nodes in a wireless communication network and covering wide areas of the globe. Especially, an increasing number of universities or individuals aspire having their own satellites and build low-budget structures such as cube satellites in LEO and the ways to reduce the sizes of their satellites. Since the antenna occupies a major portion of the satellite surface, the antenna should be miniaturized for lighter weight. The proposed metamaterial low-profile antenna, unlike the conventional patch antenna, produces such a zeroth-order resonance to create an omnidirectional radiation pattern. Also, it is connected to a UHF waveguide bandpass filter as the feeding system to examine the possible change in the situation that the antenna is combined with the system. The performances of the monopole and proposed metamaterial antennas are compared to one another.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2128-2132
• /
• 2017

Smart mobility is rapidly emerging as a next-generation eco-friendly transportation system, and the market is booming every year. However, due to the characteristics of the devices that use electricity as the power source, the motor and the battery are different from the performance and actual performance indicated by the manufacturer depending on the user's weight and driving environment. Therefore, The frequency of the overload is increased and the failure and damage of the device are increasing. In this paper, we propose an application that provides personalized recommended driving guidance and overloaded driving situation notification at the actual driving separately from the recommended driving provided by the manufacturer after measuring the driving environment of the user, so as to prevent malfunction and damage of the smart mobility device, To ensure safety.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2018

The dual security system that manages user's account information and uses NFC and OTP has been proposed. It also enhances the security of the user authentication phase by using the features that recognize within the range of less than 1m of NFC and the high security of NFC itself. During the graduation work design process which was carried out for one year and six months in a group of two in the electronics engineering major of the four-year undergraduate system was conducted. In the interim results, we participated in the conferences and thesis contest at the Institute of related to major for three times. Finally passed the examination process for three times judged by 6 professors in the major. The results were published in a graduation thesis together with other people who passed and composed in thesis form. Through the experience gained through these stages of design and production, it has gained the confidence to gain employment opportunities and actively pursue the growth stage, and presented a methodology to practice engineering education through employment.