• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.5
• /
• pp.27-33
• /
• 2014

Electrical resistivity of concrete can be measured in a more rapid and simple way for estimating durability of the concrete, however, carbonation causes a result of misleading for durability testing because carbonation leads to a significant reduction in the permeability and porosity of concrete. The purpose of this study is to estimate and quantify the effect of carbonation of concrete on a surface electrical resistivity measurement. Samples of three mixes with difference w/c were prepared and exposed in a carbonation chamber for 330 days. The results show that carbonation leads high electrical resistivity. The increase is substantial and has been shown to proportional to the extent of the carbonation by some of extent. The relationship between electrical resistivity and carbonation depth is taken in the study. Resistivity ratio of carbonated concrete to air concrete decreased significantly from the specific carbonation depth, however, resistivity ratio of carbonated concrete to air concrete had a linear relation with carbonation depth. From the relationship between electrical resistivity and carbonation depth, it is expected that the result should be subsequently used as a calibration curve for estimating carbonated concrete to overcome the interruption effect of carbonation on regular measurements of the electrical resistivity.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.67-75
• /
• 2011

The present work investigate the effect of sound reinforcement systems on the acoustics of a large dome stadium using a computer simulation. The acoustics of a dome stadium was predicted analyzed by varying room absorption, as well as the configuration of speakers including their directivity, installed height, and numbers. It was found that both D50 and RASTI were improved by increasing room absorption. Larger EDTs were observed according to the increase of room absorption at mid and high frequencies. On the other hand, RT did not show any significant correlation with the changes in room absorption, which might be the effect of a forced linear fitting for non -linear energy decay process. With respect to the speaker configuration, the speech intelligibility of a sound reforcement system installed at higher placed more relied upon their directivity rather than room absorption, Also, lower placing of speakers was found to be effective in decreasing RTs regardless of room absorption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.174-182
• /
• 2018

Given the ongoing debate in many aspects of finance, more attention may need to focus on corporate R&D expenditures. This study empirically tests financial determinants of R&D expenditures for NYSE-listed and KOSPI-listed firms. Three major hypotheses were postulated to test for corporate R&D outlay. First, proposed variables such as one-year lagged R&D expenditures, market value based leverage, profitability and cash holdings showed significant influence on corporate R&D costs for the sample firms. Moreover, financial factors inclusive of squared one-year lagged R&D expenditures, the interaction effect between one-lagged R&D expenditures and high-growth firm, non-debt tax shield, Tobin's q and a dummy variable to explain differences in accounting treatment between the U.S. and Korea, revealed significant differences between the two samples. Finally, in the conditional quantile regression (CQR) analysis for the R&D-related variables in relation to corporate growth rate, it was found that the NYSE-listed firms had a statistically significant linkage between growth potential and one-year lagged R&D expenditures at lower quantile levels. This study may shed new light on identifying financial factors affecting differences between the U.S. market (as an advanced market) and the Korean market (as an emerging market) regarding the optimal level of R&D investments for shareholders.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.191-197
• /
• 2021

To calculate the induced charge of atoms in molecular dynamics, linear equations for the induced charges need to be solved. As induced charges are determined at each time step, the process involves considerable computational costs. Hence, an efficient method for calculating the induced charge distribution is required when analyzing large systems. This paper introduces the Uzawa method for solving saddle point problems, which occur in linear systems, for the solution of the Lagrange equation with constraints. We apply the accelerated Uzawa algorithm, which reduces computational costs noticeably using the Schur complement and preconditioned conjugate gradient methods, in order to overcome the drawback of the Uzawa parameter, which affects the convergence speed, and increase the efficiency of the matrix operation. Numerical models of molecular dynamics in which two gold nanoparticles are placed under external electric fields reveal that the proposed method provides improved results in terms of both convergence and efficiency. The computational cost was reduced by approximately 1/10 compared to that for the Gaussian elimination method, and fast convergence of the conjugate gradient, as compared to the basic Uzawa method, was verified.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.841-847
• /
• 2007

최근 삶의 수준의 향상과 의학 기술의 발전으로 노인 인구가 증가하고 있다. 하지만 늘어나는 노인 인구에 비례하여 신체적 노화로 거동이 어려운 노인의 수 또한 증가하는 추세이다. 실제로 많은 노인 인구가 거동이 불편해 정상적인 생활을 하지 못하고 있기 때문에 보행 시 적절한 힘을 보조해 줄 수 있는 보행 보조 장치의 개발이 필요하다. 이 같은 보행 보조 장치를 개발함에 있어 보행자의 보행 패턴이 고려된다면 보행자의 걸음걸이에 맞춰 자연스럽게 힘을 보조해 줄 수 있기 때문에 보행자의 보행 단계 분류에 관한 연구가 선행되어야 한다. 그래서 본 논문에서는 하지 근전도 신호를 이용해 보행 단계를 구분하는 방법을 제안하고자 한다. 근전도 신호는 근육이 움직일 때 발생하는 아주 작은 전기적인 신호이다. 근전도 신호는 작은 잡음에도 민감하며, 전극을 부착하는 근육의 위치에 따라서도 값의 차이가 크기 때문에 근전도 신호의 획득 및 처리 방법이 중요하다. 위를 위해 피실험자 별 근육의 위치와 보행 속도를 달리하여 근전도 신호를 획득하고 획득한 신호로부터 여러 특징 값을 추출한다. 그리고 새로운 데이터에 대해 적응성이 강하고 시간에 따라 변하는 근전도 신호의 특성을 잘 반영할 수 있으며 각 집합(class)의 비선형 분리가 가능한 퍼지 최대-최소 신경망(Fuzzy Min-Max Neural Network: FMMNN)을 이용해 보행 단계를 분류해 본다. 실험 결과를 통해 제안한 방법의 타당성을 검증해 보고 보행자, 보행속도, 근전도 측정을 위한 근육의 위치가 보행 패턴 분류에 미치는 영향을 알아본다.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.409-417
• /
• 2009

In this study, autogenous crack healing and artificial crack healing using electrochemical electro deposition method were conducted to compare in the aspects of corrosion monitoring. Furthermore, the analysis of impressed voltage characteristics, galvanic current and linear polarization resistance comparison, and photo image processing technique were performed for quantitative comparisons of healing ratio. As a result, it was found that, in view of impressed voltage of artificial crack healing, the measured voltage was increased as time goes by. From the galvanic test results of artificial crack healing, the current vs. potential distribution value were formed widely in comparison with autogenous crack healing. In this point, it was shown that artificial crack healing has more eleatic resistance capacity than autogenous crack healing technique. Finally, it was found that artificial crack healing was 1.63 times higher than autogenous healing in view of crack healing ratio.

• Journal of the KSME
• /
• v.29 no.2
• /
• pp.175-183
• /
• 1989

오늘날 널리 연구되고 있고 공학자들에게 많은 관심을 끌고있는 압전 세라믹(ceramic)을 이용 하여 자연계에서 일어나는 각종 진동현상을 측정하고 해석하기 위한 센서(sensor)의 설계, 제작은 이미 선진국에서도 보편화된지 오래이다. 특히 압전형 가속도계(piezo type accelerometer)는 진동의 절대 측정에 가장 유용한 센서로 널리 알려져 있다. (1) 아주 넓은 사용 주파수 범위 (2) 넓은 동적범위(dynamic range)에 걸친 뛰어난 선형성(linearity) (3) 측정된 가속도 신호를 전기적으로 적분하여 속도와 변위에 대한 자료 제공 용이 (4) 높은 정확성 (5) 자발 전(self-generating)이므로 외부 전원 공급이 불필요 (6) 수명과 뛰어난 내구성 (7) 작은 크기와 가벼운 무게 등이다. 현재 기계 구조물 진동 측정에 이용되고 있는 스트레인 게이지 형(strain gage-type)의 가속도계는 감도가 좋고 저주파 진동 측정에는 편리한 반면 충격이나 높은 주파수 전동 측정에는 적합하지 않으며 내부 구조가 다소 복잡하다(2). 반면에 압전형 가 속도계는 압전 소자와 관성 질량의 조합 설계로서 저주파 진동 측정에 적합한 고감도의 가속도 계와, 감도는 떨어지나 아주 높은 주파수 범위의 진동까지 측정이 가능한 가속도계를 손쉽게 설계, 제작할 수 있다. 본 글에서는 선진국에 비해 낙후된 국내의 센서 설계, 제작 기술을 고 양시키고자 최근 한국과학기술원에서 시도된 압전형 가속도계의 개발 연구 사례를 중심으로 설계 및 제작시 고려 사항과 보정 문제를 소개하고자 한다.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.75-83
• /
• 2020

This study aimed to understand the differences in general characteristics, principal diagnosis, injury-related characteristics, and types of transportation accidents between young-old and old-old patients who were hospitalized owing to injury based on data from the Korean National Hospital Discharge In-Depth Injury Surveys. We used a complex sample cross tabulation analysis (chi-square test) and complex sample generalized linear model (t-test). Therefore, the primary focus of healthcare professionals working with the old-old should prevent falls in the home and increase the available medical care, financial aid plans, and psychosocial support for aging. Additionally education on traffic accident prevention and road safety is particularly important for old-old patients.

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.79-84
• /
• 2010

Matching spots between two sets of 2-dimensional electrophoresis can make it possible to find out the generation, extinction and change of proteins. Generally protein spots are separated by 2-dimensional electrophoresis. This process makes the position of the same protein spot a little different according to the status of the tissue or the experimental environment. Matching the spots shows that the relation of spots is non-uniform and non-linear transformation. However we can also find that the local relation preserves the topology. This study proposes a matching method motivated by the preservation of the topology. To compare the similarity of the topology, we compared the distance and the angle between neighbour spots. Experimental result shows that the proposed method is effective.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4C
• /
• pp.231-238
• /
• 2008

A column testing device capable of measuring the electrical resistivity of soil at 3 different locations was developed to verify applicability of bulk electrical conductivity (BEC) breakthrough curves in monitoring contaminant transport. Tracer injection tests were conducted with three different types of saturated sands to obtain average linear velocities and longitudinal hydrodynamic dispersion coefficients based on BEC breakthrough curves and effluent solute breakthrough curves. Comparative analysis of transport parameters obtained from curve fitting the results into the analytical solutions confirmed the validity of resistance measurements in estimating time-continuous resident solute concentration. Under the assumption that a linear relationship exists between ${\sigma}_{sat}-{\sigma}_w-C$, the BEC breakthrough curves are able to effectively reduce the laborious and time-consuming processes involved in the conventional method of sampling and analysis. In order to reduce possible uncertainties in analyzing the BEC breakthrough curves, it was recommended that resistance measurements take place nearby the effluent boundary. In addition, a sufficient electrical contrast or difference in the electrical conductivity of the influent and the saturating solution is required to conduct reliable analysis.