• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.226-230
• /
• 2005

This paper presents the actuation performance of a conducting shape memory polyurethane (CSMPU) actuator. We introduced a concept of shape memory polyurethane activated by electric power while conventional shape memory polyurethanes are activated by external heat source. A conducting shape memory polyurethane actuator was manufactured by adding cabon nano-tube to conventional shape memory polyurethane. The main problem of the previous CSMPU was bad dispersion of carbon nano-tubes in polyurethane. In this paper, we have tried to find manufacturing method to solve the dispersion problem. With a lot of elaborative works, we have developed conducting shape memory polyurethane actuator with good electrical performance. The actuation performance of the developed conducting shape memory polyurethane actuator was measured and assessed.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.606-610
• /
• 2019

In this study, we demonstrated that the nonenzymatic glucose sensor based on the flexible carbon fiber bundle electrode with BDD nanocomposites (CF-BDD electrode). As a nano seeding method for the deposition of BDD on flexible carbon fiber, electrostatic self-assembly technique was employed. Surface morphology of BDD coated carbon fiber electrode was observed by scanning electron microscopy. And the electrochemical characteristics were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry. This CF-BDD electrode exhibited a large surface area, a direct electron transfer between the redox species and the electrode surface and a high catalytic activity, resulting in a wider linear range (3.75~50 mM), a faster response time (within 3 s) and a higher sensitivity (388.8 nA/mM) in comparison to a bare CF electrode. As a durable and flexible electrochemical sensing electrode, this brand new CF-BDD scheme has promising advantages on various electrochemical and wearable sensor applications.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.349-358
• /
• 1997

meta-Nitroaniline(mNA) crystals were grown from the supercooled melt for the first time. A seed was introduced into the purified mNA melt of 100 ml 0.1 K above the melting temperature ($T_m$ : $112.0^{\circ}C$) and crystal was grown at constant supercooling of 0.1 K. The melt was stirred . mechanically and the crystal was also rotated while the growth proceeds. mNA crystals of size up to $20{\times}15{\times}15 \textrm {mm}^3 and of very high perfection could be grown for the period of one day. The bottom half of the crystal faces are well-faceted and covered by {111} and {021} faces, while the faces of the top half are not well defined. The overall crystal morphology was characterized by the unidirectional growth along one of the polar axes. The absolute direction of preferred growth was determined to be [001] by the pyroelectric measurements. The perfection of the crystal was characterized by synchrotron X-ray topography and optical characterization was made by measuring second harmonic conversion efficiency.

• Tunnel and Underground Space
• /
• v.19 no.5
• /
• pp.407-420
• /
• 2009

In this study geostatistical technique using indicator kriging was performed to evaluate the optimal rock mass classification by integrating the various geophysical information such as borehole data and geophysical data. To get the optimal kriging result, it is necessary to devise the suitable technique to integrate the hard (borehole) and soft (geophysical) data effectively. Also, the model parameters of the variogram must be determined as a priori procedure. Iterative non-linear inversion method was implemented to determine the model parameters of theoretical variogram. To verify the algorithm, behaviour of object function and precision of convergence were investigated, revealing that gradient of the range is extremely small. This algorithm for the field data was applied to a mountainous area planned for a large-scale tunneling construction. As for a soft data, resistivity information from AMT survey is incorporated with RMR information from borehole data, a sort of hard data. Finally, RMR profiles were constructed and attempted to be interpreted at the tunnel elevation and the upper 1D level.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2756-2758
• /
• 2005

본 논문에서는 제어시스템의 신뢰성 향상을 위한 고장허용제어계를 실현하기 위하여, 함수관측자를 도입한 장치고장검출(IFD)기법 및 고장보상알고리즘을 제안하고, 이를 전형적인 불안정 비선형시스템인 역진자제어계에 적용하였다. 제안된 IFDS는 기존의 다중관측자기법과 동일한 구조를 가지지만 최저차 설계가 가능한 미지입력 함수관측자를 채택함으로서 알고리즘의 단순화를 가하였을 뿐 아니라 고장량의 추정 등 다양한 설계목적을 고려하여 설계될 수 있다는 특징을 가진다. 제안된 고장 검출식별 기법의 제안된 역진자제어계를 위한 제어기, 고장검출식별 및 보상알고리즘을 모두 포함한 상태에서 고장허용제어의 가능성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1265-1266
• /
• 2015

본 논문에서는 PMF와 FBG로 구성된 PDL 기반 사냑 간섭계를 이용하여 편광 간섭형 광섬유 압력 센서를 구현하였다. 여러 종류의 PMF들에서 압력 민감도를 비교하기 위해, 서로 다른 세 종류의 보우-타이형 PMF를 센서부로 사용하였다. 구현된 광섬유 압력 센서를 이용하여 0~0.3 MPa의 범위에서 압력 측정을 수행하였으며, 최대 압력 민감도는 근사적으로 -15.07 nm/MPa로 측정되었고, 센서의 선형성을 나타내는 $R^2$값은 ~0.992로 측정되었다. 제안된 센서는 FBG를 이용하여 외부 온도 변화의 보상이 가능하면서도, 이전의 편광유지 광자결정 광섬유 기반 압력 센서에 비해 압력 민감도를 4배까지 증가시킬 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.300-302
• /
• 2003

본 연구에서는 발전기에 적용된 전력계통안정화장치(Power System Stabilizer)의 적용사례를 분석한다. 전력계통안정화장치에 적용된 알고리즘은 Lead-Lag 제어기가 있고, 현대 제어이론에 바탕을 둔 LQR, LQG, $H_{\infty}$, 슬라이딩모드 제어기, 비선형궤환제어기가 있다. 그 외에 퍼지제어기, 뉴럴 제어기, 진화연산제어기등이 있다. 이중에 전력계통안정화장치의 제어알고리즘에 대하여 대표적인 사례를 파악하고져 한다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1799-1803
• /
• 2017

This paper introduces the prediction methods of windstorm advisory using GP nonlinear compensation and SVM. The existing special report prediction is not specialized for strong wind, such as windstorm, because it is based on the wide range of predicted values for wind speed from low to high. In order to improve the performance of strong wind reporting prediction, a method that can efficiently classify boundaries of strong wind is necessary. First, evolutionary nonlinear regression based compensation technique is applied to obtain more accurate values of prediction for wind speed using UM data. Based on the prediction wind speed, the windstorm advisory is determined. Second, SVM method is applied to classify directly using the data of UM predictors and windstorm advisory. Above two methods are compared to evaluate of the performances for the windstorm data in Jeju Island in South Korea. The data of 2007-2009, 2011 year is used for training, and 2012 year is used for test.

• Korean Chemical Engineering Research
• /
• v.62 no.2
• /
• pp.147-152
• /
• 2024

Most medical sensors are disposable products. In order to reduce inspection and diagnosis costs, it is more important to develop the inexpensive electrode materials. We fabricated the CuO NPs/PANI/E-PGE as an electrode material for disposable electrochemical sensors and applied it to a non-enzymatic glucose sensor. For surface activation of PGE, pretreatment was performed using chemical and electrochemical methods, respectively. Electrochemical properties according to the pretreatment method were analyzed through chronoamperometry (CA), cyclic voltammetry (CV) and electrochemical impedance (EIS). From these analytical results, the electrochemically pretreated PGE (E-PGE) was finally adopted. The non-enzymatic glucose sensor based on CuO NPs/PANI/E-PGE shows sensitivity of 239.18 mA/mM×cm² (in a linear range of 0.282~2.112 mM) and 36.99 mA/mM×cm² (3.75423~50 mM), detection limit of 17.6 μM and good selectivity. Based on the results of this study, it was confirmed that the modified PGE is a high-performance electrode material. Therefore, these electrodes can be applied to a variety of disposable sensors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.132-132
• /
• 2004

카본나노튜브는 나노튜브의 종류에 따라 1~10nm의 직경과 수 $\mu\textrm{m}$정도의 길이를 가지는 고종횡비(high aspect ratio)가 가능하며, 고강성, 전기화학적 내성, 마모에 대한 강인성 때문에 원자력간 현미경(AEM)의 프로브로서 이상적인 재료로 인식되어 왔다. 따라서 단백질이나 DNA를 측정하는 바이오 분야, 나노 일렉트로닉스 분야, 나노 구조 측정분야 등 나노 관련 측정분야에서 점차 그 활용도가 높아 져가고 있다. 특히 100nm이하의 반도체의 CD(critical Dimension)을 측정하는데 있어서 나노튜브는 가장 이상적인 후보라고 할 수 있겠다.(중략)