• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1223-1224
• /
• 2006

본 논문에서는 Half Bridge Series Resonant Inverter를 이용한 유도가열 시스템 설계를 하고 제작하여 구현하였다. 이러한 유도가열 시스템의 제작을 위해서는 공진탱크와 매칭 트랜스포머의 설계가 필수적이다. 따라서 이런 설계를 위해 PSpice 를 이용하여 공진탱크의 입력 임피던스 Bode Plot 을 그려 분석하고 이를 바탕으로 탱크회로를 설계 하였다. 매핑 트랜스포머의 설계는 출력 Power 와 1,2 차 회로 조건에 의해 설계 되어졌다. 이렇게 설계한 유도가열 시스템을 Pspice 를 이용해서 Simulation 함으로써 주파수에따른 출력 Power 의 변화를 볼수 있었으며, 유도가열 시스템을 실제 제작하여 구현함으로써 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1645-1647
• /
• 1997

Electronic circuits are becoming more vulnerable owing to the development of integrated circuit. Computer and info-communication facilities are very sensitive to surges caused by lightning, and they can suffer a malfunction and damage. Recent concern about damage and upset caused by transient overvoltages has focused on surge protection. The most important parameter in surge protection is the transient grounding impedance. In this paper, the transient grounding impedances of a rod electrode have been measured under impulse current waves. Z-t, Z-i and V-i characteristics of the grounding electrode in according to the length of the grounding lead wire were obtained and analyzed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.457-462
• /
• 1998

유동장에서의 기포거동 정보의 중요성 때문에 이를 정확히 측정하기 위한 실험방법이 여러 가지로 발전해 왔지만 아직까지도 기포분포에 대한 정확한 정보 추출에는 도달하지 못하고 있다. 본 연구에서는 원래 의공학분야에서 새로운 tomography 기술로 연구되고 있는 EIT(Electrical Impedance Tomography) 기술을 2상유동에서의 기포분포 측정방법 개발에 적용하기 위한 기초연구와 기포분포 가시화를 위한 전산실험을 수행하였다. 기포분포 가시화를 위해서는 EIT inverse problem solver로 많이 사용되는 iNR(improved Newton-Raphson) 계열의 EIT 염상복원 프로그램을 본 연구진이 유전알고리즘(Genetic Algorithm)과 fuzzy-based mesh grouping 방법을 추가하여 개선한 영상복원프로그램을 사용하였다. 전산실험 결과 본 영상복원프로그램으로는 12$\times$12의 분해능으로 모사되는 기포분포를 저항률 오차한도 $\pm$1%의 신뢰도로 PC상에서 복원이 가능함을 확인하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.293-296
• /
• 2008

In this paper, we carried out an comparative analysis on ground impedance of single copper-, three linked copper- and single carbon- electrodes by the application of various current sources such as sine, square, and surge with fast risetime. Impedance of single-copper electrode was the highest among them and was affected as the amplitude and the frequency of applied current. However, impedance characteristics of the three linked copper- and the single carbon- electrodes showed a similar tendency.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.193-196
• /
• 2008

In these days, large structures are constructed and bonded with ground grid Because the distances between mesh and auxiliary electrodes are not enough in downtown areas, it is very difficult to measure the ground resistance of large scale grounding electrode systems. Actually the auxiliary electrodes for test are installed in grounding grid. This paper present the experimental results of ground resistance and impedance according to the location of auxiliary electrode. As a result, we get much lower resistances and impedances than real values the auxiliary electrodes are placed in the ground grid. In case that the auxiliary electrodes are located in the ground grid the resistances are very low and reactance only is inductive component.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.211-215
• /
• 2008

This paper deals with the transient ground impedance of small-sized needle-rod installed in a test field, Impulse voltage generator was used to inject lightning impulse on a ground electrode and modified fall-of potential method was proposed to measure the high ground potential rise. Transient ground impedance was analysed with impedance curve and I-V curve as respects the resistivity of soil. Soil ionization near the ground electrode is activated in high resistivity soil and have an effect on the reduction of transient ground impedance significantly.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.333-336
• /
• 2008

This paper resents a theoretical analysis for the grounding impedance influenced by the ground rod's dimension using the distributed parameter model. In this paper, EMTP and Matlab Program were used to simulate the distributed parameter model and to analyze the frequency-dependent characteristics of the ground rods. We compared two kinds of ground rods having different dimensions and the frequency-dependent characteristics of two ground rods were quite different from each other. It is estimated that these different characteristics are caused by the distributed parmeters which are changed by the length of ground rod.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.69-72
• /
• 2008

This paper presents the transient and conventional grounding impedance behaviors of large grid grounding system associated with the injection point of impulse current The measurement methods consider two possible errors in the grounding-system impedances: (1) ground mutual resistance due to current flow through ground from the ground electrode to be measured to the current auxiliary, (2) ac mutual coupling between the current test lead and the potential test lead The test circuit was set to reduce the error factors. The transient grounding impedance depends on the rise time and injection point of impulse current It is effective that grounding conductor is connected to the center of the large grid grounding system.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.528-530
• /
• 2003

UPFC Pilot plant project의 결과물로써 설계, 제작된 80MVA급 UPFC(Unified Power Flow Controller)는 현재 강진변전소 강진-장홍 154kV 선로에 설치되어 commissioning 시험을 완료하고 시험 운전되고 있다. UPFC는 기존에 수동적으로 제어하였던 선로의 전압, 임피던스 및 위상각을 능동적으로 제어함으로써 전력공급의 신뢰성 및 유연성을 높일 수 있다. 이러한 기능을 갖는 UPFC의 시험 운전을 통하여 UPFC의 기기자체의 성능을 검증하고 기기의 운전 영역의 변화가 인근의 계통에 미치는 영향에 대하여 조사하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.317-319
• /
• 2003

This paper describes an adaptive distance relay for double-circuit line protection with mutual impedance and fault resistance. Double-circuit lines have two operating condition; both lines of a double-circuit line are in operation and one line is switched-off and both ends of the line are grounded. For optimal distance protection, the trip region is calculated, which have respect to mutual impedance and fault resistance.