• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.20-29
• /
• 2021

As the feasibility of urban air mobility (UAM) service using electric vertical take-off and landing (eVTOL) aircraft increases due to aircraft electrification, distributed propulsion, and artificial intelligence technologies, the U.S. and European aeronautical societies have been improving their certification system and regulations for the type certification of eVTOL. The improved certification system is expected to be ready in the near future, after the European Union Aviation Safety Agency (EASA) proposed the VTOL Special Condition, SC-VTOL in 2019. However, the current domestic certification system is still insufficient to properly respond to eVTOL. This study investigated the development trends of foreign eVTOL and certification systems, identified considerations to improve the domestic certification system, and proposed the measures for type certificates and type certificates validation of eVTOL based on the comparison between SC-VTOL and Korea airworthiness standards (KAS).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.969-976
• /
• 2020

Urban Air Mobility is attracting attention as a future innovation industry around the world, and leading industries are considering the application of composite materials for structural robustness and lightening in the designing and manufacturing new concept eVTOL aircraft. To apply composite materials to the new concept of eVTO aircraft, this paper was analyzed about composite material qualification system of FAA & EASA and institutionalized by Korea Government, including the procedures and methods, the organization to carry out the material verification for domestic conditions. The domestic composite material qualification system will not only make it easier for manufacturers of eVTOL aircraft with a new concept to apply composite materials to domestic aircraft through pre-material qualification, but also reduce the burden of material qualification within the period of type certification. In addition, domestic manufacturers of composite materials with qualified material quality and performance will be easy to enter for domestic aircraft applications and composite material manufacturers with experience in applying to aircraft will have a positive impact on overseas exports. This system will be able to promote the development eVTOL aircraft industry of a new concept and enhance international credibility of made aircraft in Korea.

• Journal of Institute of Convergence Technology
• /
• v.12 no.1
• /
• pp.25-30
• /
• 2022

도심항공교통은 다수의 전기추진 수직이착륙 항공기가 이착륙 가능한 버티포트가 필요하다. 빌딩풍은 고층건물 주변부에서 발생하는 강풍으로 항공기 이착륙과정에서 항공기의 비행 안전성을 크게 훼손시킬수 있다. 본 연구에서는 항공기 이착륙시 발생할 비행안정성 분석을 위하여 먼저 빌딩풍 주변의 유동특성을 분석하는 연구를 수행하였다. 유동해석은 상용CFD 소프트웨어인 SimericsMP를 사용하였으며, 난류 모델은 k-ε RNG 모델을 사용하였다. 해석방법의 타당성을 검증하기 위하여 CAARC 빌딩모델의 표면 압력 계산결과를 풍동시험 결과와 비교⋅검증하였다. 두 개의 고충빌딩이 있는 상황을 가정한 후, 빌딩풍이 빌딩 주변부의 속도분포 변화에 미치는 영향을 분석하였다. 두 개의 고층 건물 사이의 거리가 증가하는 경우 와들 사이의 상호작용이 감소하는 것을 확인했다. 향후 본 연구를 확장하여 다양한 형상의 고충건물이 밀집해 있는 도심지역에 대한 유동해석 연구를 진행하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.859-870
• /
• 2021

KARI (Korea Aerospace Research Institute) is developing a design framework for the concept and preliminary design of eVTOL aircrafts. A low fidelity mission analysis tool was developed for the eVTOL aircrafts of Lift-Tilt Concept, which have tilt propellers and lift propellers, using open source SUAVE package. For its development, a review for the propeller performance analysis functionality was made. To find the trim solution at each mission segment automatically, an algorithm is implemented, using a global optimization technique through parallel processings and DOE(design of experiment). Using the tool, the one seated eVTOL OPPAV(optionally piloted personal air vehicle) was modeled and evaluated, which results were compared with the preliminary design data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.9
• /
• pp.691-701
• /
• 2020

An actuator mixer design using convex optimization technique situation where the propulsion system of an electric VTOL UAV during vertical take-off and landing maneuvers is proposed. The attainable control set to analyze the impact from failure of each motor and propeller can be calculated and illustrated using the properties of the convex function. The control allocation can be defined as a convex function optimization problem to obtain an optimal solution in real time. The mixer is implemented using a convex optimization solver, and the performance of the control allocation methods is compared to the attainable control set. Finally, the proposed mixer is compared with other techniques with nonlinear sux degree-of-freedom simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.12
• /
• pp.1097-1107
• /
• 2015

General VTOL aircraft uses gas turbine engine which has high power to weight ratio. However, in the VTOL UAV in small sector, the gas turbine as a prime mover is not adequate because of the limitation of the high fuel consumption ratio of the gas turbine. In this research, The Series Hybrid-Electric Propulsion System(SHEPS) has been proposed and technology survey & comparison analysis has conducted to constitute propulsion system for engine, electric motor and battery. To achieve this object a 65kg-class P-UAV from "Company I" was used. And to estimate the validity of power control algorithm and developed power management control, Matlab/simulink$^{(R)}$ has been used for the simulation. As a result, the developed algorithm worked comparatively well and the research has predicted that SHEPS was satisfied enough for 7 hour of endurance for mission profile.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.358-367
• /
• 2020

With the increases of average commuting time of office workers in the Seoul metropolitan area and the cost of traffic congestion on roads, the need for new transportation is increasing and urban air mobility (UAM) is emerging as an alternative. Therefore, in this paper, the vertiport locations were selected and routes were established using population, traffic and commuting data of Seoul and Gyeonggi Province. Vector thrust type and multicopter type of eVTOL compatible for UAM were selected by analyzing the types of eVTOLand time required for selected routes was calculated. In addition, the time required when we utilize other transportations was compared with UAM. Finally, it was verified that the commuting time can be sharply reduced when we use UAM.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.1
• /
• pp.74-81
• /
• 2021

UAM(Urban Air Mobility) systems have evolved in the form of helicopters in the 1960~1970s, tiltrotors in the 1980s, small aircraft transportation systems in the 2000s, and electric-powered Vertical Take-Off and Landing (eVTOL) in the 2010s; accordingly, the early heliport has evolved to its current form of a Vertiport. Vertical Takeoff and Landing Sites, Vertiports, are important factors for the successful introduction of UAM, along with the resolution of air traffic control (ATC), air security, and noise problems. However, there are no domestic or international installation standards and guidelines yet. Therefore, in this study, installation standards were prepared by referring to domestic and international case studies, ICAO standards, and MIT research papers. The study proposes to establish standards for Final Approach and Takeoff Area (FATO) as 1.5D, 1D for Touchdown and Lift-Off Area (TLOF), and 1.5D for Safety Area (SA). It also proposes to add "UAM Vertiport Installation Standards" to the 「Act on the Promotion and Foundation of Drone Utilization, Drone Act」.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.233-241
• /
• 2021

As increasing the feasibility of the eVTOL UAM(electric vertical take-off and landing urban air mobility), numerous corporations and laboratories are conducting researches. In the aircraft development process, estimating the cost of the aircraft is essential part in terms of budgeting and commercial viability analysis. However, it is difficult to predict the cost of an eVTOL UAM owing to various configurations and little open cost information. This paper presents a novel method to predict the vehicle cost of various eVTOL configurations by modifying previous studies of the aircraft cost estimation. A vehicle cost of Wisk Cora is calculated by the presented method as an example to illuminate the method. The method is indirectly validated by comparing the vehicle costs of six representative eVTOL aircraft with those from the UAM study reports.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.12
• /
• pp.1011-1018
• /
• 2021

This numerical study conducts the modeling and the hover performance analyses of coaxial co-rotating rotor(or stacked rotor), using a rotorcraft comprehensive analysis code, CAMRAD II. The important design parameters such as the index angle and axial spacing for the coaxial co-rotating rotor are varied in this simulation study. The coaxial co-rotating rotor is trimmed using the torque value of the upper rotor of the previous coaxial counter-rotating rotor or the total thrust value of the previous coaxial counter-rotating rotor in hover. The maximum increases in the rotor thrust is 1.84% for the index angle of -10° when using the torque trim approach. In addition, the maximum decreases in the rotor power is 4.53% for the index angle of 20° with the thrust trim method. Thus, the present study shows that the hover performance of the coaxial co-rotating rotor for e-VTOL aircraft can be changed by the index angle.