• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.566-567
• /
• 2012

본 논문에서는 산성수를 전기분해하여 알칼리 이온수를 생성하는 정수 시스템을 제안하였다. 시스템은 크게 전해조, 냉각 유닛, 콤프레서, 정수?터 등으로 구성되어 있다. 특히 알칼리이온수를 생성하기 위해서는 전기분해를 위한 전력변환 회로가 필요하다. 본 논문에서는 알칼리이온수기를 위한 전해조 구동회로를 PSIM을 통한 검증 하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.4
• /
• pp.349-358
• /
• 2023

This research aimed to enhance the initial strength of concrete that is mixed with ground granulated blast furnace slag, as well as to fortify its resistance to carbonation and chloride ion permeation. To achieve this, alkaline aqueous, produced through the electrolysis of potassium carbonate, was employed as the mixing water in the preparation of concrete. To substantiate the increment in initial strength, compressive strength measurements of the concrete were executed. Additionally, an accelerated carbonation test and a chloride ion permeation resistance test were undertaken. The results confirmed that the initial strength of the concrete, which utilized electrolysis alkaline aqueous as mixing water, exhibited an improvement in comparison to concrete mixed with conventional water. It was also verified that both carbonation resistance and chloride ion permeation resistance showed enhancements.

• Membrane Journal
• /
• v.27 no.6
• /
• pp.477-486
• /
• 2017

Hydrogen is one of energy storage systems, which could be transfer from electric energy to chemical energy or from chemical energy to electric energy, and is as an energy carrier. Water electrolysis is being investigating as one of the hydrogen production methods. Recently, water electrolysis receive attention for the element technology in PTG (power to gas) and PTL (power to liquid) system. In this paper, it was explained the principle and type for the water electrolysis, and recent research review for the alkaline water electrolysis.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.135-136
• /
• 2023

In this study, a concrete was prepared using an alkaline aqueous solution produced by electrolyzing potassium carbonate in order to improve the low initial strength of concrete using blast furnace slag. In order to confirm the increase in initial strength, the compressive strength of specimens was measured on the age of 7, 28 days. As a result, the blast furnace slag concrete using the electrolysis alkaline aqueous solution as the mixed water show high strength more than the blast furnace slag concrete using the general mixed water.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.6
• /
• pp.37-42
• /
• 2004

It is necessary for what just keep a living body balance be devoted to it being varied with acidity serious trouble, and constitution of a study person about the density (ph) change that an alkaline ion necessary for a living body is numerical to supply a human body with number alkali by PWM voltage control. Works in the water which included the calcium (Ca), kalium (K), magnesium (Mg), natrium (Na) back who is helpful for a human body, and there is Alkaline. It is done this alkaline electrolysis to ask in order to create a number, and minerals are gathered through isolated layer (isolated special layer) to a - electrode direction, and is created. of course, prominent derelicts gather, and the acidity capital is happened, and -ion of a chlorine (Cl), phosphorus(P), sulfur (S) back is usable unfavorably in water of different use to a + electrode direction. Microprocessor was used with a - pole and a + pole with a PWM(pulse width modulation) voltage in this electrolysis process, and four kinds of PWM voltages were implemented, and a voltage every ph density change tried to be considered. It is expected by getting exactly if number alkaline ion of ph density value necessary is done with setting value if PWM control is used thus.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.185-190
• /
• 2021

Cement has been used as a main material in the modern construction industry. However, it has been pointed out as a main cause of global warming due to carbon dioxide generated during manufactured. Recently, research that replacing cement substitute to industrial by-products such as Blast Furnace Slag which is by-producted in steelworks. When Blast Furnace Slag is used as a cement substitute, it shows a problem of lower initial strength, which is caused by glassy membrane on the particle surface. In this study, we used Electrolysis Alkaline Aqueous to improve the usability and problem of lower initial strength. As a result of the experiment, cement matrix using Blast Furnace Slag and Alkaline Aqueous showed initial strength and hydrate product were developed than that using general mixing water. Also, as a result of porosity analysis, It was confirmed that cement matrix using Alkaline Aqueous and Blast Furnace Slag has a tighter structure in internal porosity and porosity distribution than using general mixing water.

• Magazine of RCR
• /
• v.18 no.1
• /
• pp.40-44
• /
• 2023

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.269-274
• /
• 2013

We are used with the alkaline ion water which an application field does to object for drinking water compare with the alkaline ion water which asked ion acid electrolysis so as to be very different. This is used with sterilization disinfection use by residual chlorine in case of strong acidity according to ph intensity, and in case of middle acidity use by washing and face washing, and mix with meal materials in case of weak acidity widely usable in cooking. Acid ion water generates as we electrolyze water. Chlorine gas and sodium hydroxide etc. was generated at electrolysis process, and we have toward sterilizing power. Derelicts such as chlorine, phosphorus, sulfur etc. are gathered from a negative ion, and we make acid ion water to + electrode direction in electrolysis. We used a diaphragm in order to disconnect too acid water and alkaline water. We implemented so that the acid water which it came down to three kinds of PWM voltage to PWM (pulse width modulation) control, and implementation method of ph intensity change authorized ph intensity between weak acidity to electrode in strong acidity as we used Microprocessor, and intensity was adjusted successively by PWM control was generated.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.168.1-168.1
• /
• 2017

화석연료를 대체하기 위한 에너지원으로서 수소에너지에 대한 연구가 활발히 진행되고 있다. 수전해는 무한 청정한 물을 전기분해하여 수소를 생산하는 기술로써 대표적으로 알칼리 수전해(alkaline water electrolysis, AWE)와 고분자 전해질막 수전해(polymer electrolyte membrane water electrolysis, PEMWE)가 있다. 그 중, AWE는 알칼리 분위기에서 물분해 반응이 진행되어 촉매의 부식 위험성이 비교적 낮기 때문에 상대적으로 저렴한 비귀금속 산화물 촉매를 사용할 수 있다는 장점이 있다. 본 연구에서는 비귀금속인 Cu, Co를 이용하여 $CuCoO_4$를 합성한 후 산소 발생 촉매 물질로 활용하여 산소 발생 반응(Oxygen Evolution Reaction, OER)특성을 고찰하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.204-210
• /
• 2022

Cement is pointed out as the main cause of carbon dioxide emission in the construction industry. Many researchs are underway to use blast furnace slag, an industrial by-product, as a substitute for cement to reduce carbon dioxide emitted during the manufacturing the cement. When blast furnace slag is used as a substitute for cement, it has advantages such as long-term strength and chemical resistance improvement. However, blast furnace slag has a problem that makes initial strength low. This is due to the impermeable film on the surface created during the production of blast furnace slag. The created film is known to be destroyed in an alkaline environment, and based on this, previous studies have suggested a solution using various alkali activators. But, alkali activator is dangerous product since it is a strong alkaline material. And it has the disadvantage in price competitiveness. In this study, an experiment was conducted to improve the initial hydration reactivity of the blast furnace slag to secure the initial strength of the mortar substituted with the blast furnace slag and to check whether the carbonation resistance was increased. As a result of the experiment, it was confirmed that the mortar using alkaline water showed higher strength than the mortar using tap water, and there were more hydration products generated inside. In addition, it was confirmed that the mortar using alkaline water as a compounding water had high carbonation resistance.