• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.1-12
• /
• 2014

This study carried out life cycle assessment for evaluating environmental impacts of timber Arch-Truss bridge by using domestic Pinus rigida Miller glued-laminated timber throughout life cycle such as extraction, manufacturing, transportation, construction, use, dismantlement, transportation of waste, disposal and recycling. The life cycle GHG (GreenHouse Gas) emissions of the target bridge are 192.56 ton $CO_2$ eq. in 50 years. Especially, the life cycle GHG emissions of concrete used in the target bridge are 82.84 ton $CO_2$ eq. which accounts for 53.02% of the GWP (Global Warming Potential) in extraction and manufacturing stages. The target bridge is constructed of $116.57m^3$ of domestic Pinus rigida Miller glued-laminated timber and used timber has stored 104.72 ton $CO_2$. If an effect of carbon storage in timber is applied to the total GHG emissions of the target bridge, the GHG emissions can be reduced by 54.38%. In the case of substitution effect, if domestic Pinus rigida Miller glued-laminated timber replaces steel manufactures used in other bridge which has the same structure and life span as the target bridge, the GHG emissions in extraction and manufacturing stages can be reduced by 10.26% to 23.91%.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.46-54
• /
• 2018

In the 21st century, the Earth has continued its efforts to reduce carbon emissions to overcome the crisis caused by climate change. The construction industry, which is a representative industry that produces large amounts of the environmental load during construction, should actively reduce the amount of the environmental load. From the planning stage of the construction facility, it is necessary to consider the environmental load such as route selection and structure type selection to reduce the environmental load. However, the environmental load can be estimated based on the input resource amount. However, in the planning stage, it is difficult to accurately calculate the environmental load due to lack of information on the construction amount. The purpose of this study is to select the environmental load factors for IPC girder bridges to be used in the environmental load estimation model in the planning stage. Specific information related to the environmental load was selected from a list of information available in the planning stage, reflecting the Life Cycle Assessment(LCA), correlation, principal components analysis and expert opinion. The list of selected planning stage information is 10 such as span length and bridge extension, and it is expected to be used as a basic data for the future development of environmental load estimation model.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.56-64
• /
• 2022

Construction waste is generated at a rate of approximately 221,102 tons/day in Korea. In particular, mixed construction waste generates approximately 24,582 tons/day. The other components were recycled by 98.9%. The amount of greenhouse gas emissions from the waste was 17.1 million tons of CO2 equaling 2.3% of the total greenhouse gas emissions. To reduce greenhouse gas emissions, reducing the environmental impact is becoming increasingly important. However, appropriate treatment must first be established, as mixed construction waste is also increasing. Thus, an effective plan is urgently needed because it is frequently segregated and sorted by the landfill and incinerated. In addition, there is an urgent need to prepare various effective recycling methods rather than a simple treatment. Therefore, this study analyzed the environmental impact of the treatment of mixed construction waste by calculating greenhouse gas emissions. As a result, the highest greenhouse gas generation occurred during the incineration stage. Moreover, the optimal method to reduce greenhouse gas emissions is recycling and energy recovery from waste. In addition, the amount of greenhouse gas generated during energy recovery from the waste stage was the second highest. However, greenhouse gas emissions can be reduced by using waste as energy to reduce fossil fuel consumption. In addition, for the transportation stage, the optimal reduction plan is to minimize the amount of greenhouse gas emissions by setting the optimal distance and applying biofuel and electric vehicle operations.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.55-61
• /
• 2013

In this study, eco efficiency analysis is performed to analyze Neodymium (Nd) containing permanent magnet recycling process. Life cycle assessment (LCA) and life cycle costing (LCC) are used to apply eco efficiency analysis. In the environmental aspects, global warming potential (GWP) of 1kg permanent magnet is 1.25E + 00 kg $CO_2$ eq. and abiotic resource depletion potential (ADP) is 1.10E - 02 Sb eq. This recycling process costs about 2130 KWR. Environmental efficiency of GWP is at 6.43 and ADP is at 5.32 when compared with vigin metal. Economic efficiency is at 6.74. This study confirms that Nd containing permanent magnet recycling process is sustainable system because of environmental and economical improvement.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.17-24
• /
• 2016

This study aims at evaluating environmental impacts on recycling process of used small household appliances. The recycling process mainly consists of manual dismantling, crushing and various sorting processes to effectively recover valuable resources and to minimize environmental impact. In this study, life-cycle assessment (LCA) methodology is applied to analyze major environmental parameters such as GWP, ADP, POCP, EP, etc. One of the major impact categories on the weight basis in the recycling process is global warming (GWP) 57.1%, next to ADP 35.4% and POCP 4.8%, respectively. As a result of environmental impact on recovery of valuable resources/ton, the GWP of plastics for ABS is highest (33.7%) compared to ferrous metals (9.4%). The effects of environmental and economical benefit are also analyzed to compare with the amount of virgin materials to be recycled by recycled materials. In addition, recycled materials are also more economical in comparison to virgin materials due to the environmental avoiding effect by recycling. In conclusion, the key environmental issues related to the recycling of e-wastes are analyzed and therefore, the effective recycling process will contribute to mitigate global warming potential in the near future.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2019

Environmental evaluation of two different oxygen high barrier films were performed using life cycle assessment. One of the films (traditional film) was composed of aluminum oxide coated PET film, ink, LDPE and LLDPE. Another film (new film) was consists of PET, ink, protein based coating material, LDPE, LLDPE. Main layer to achieve the high oxygen barrier for traditional film was aluminum oxide coated PET film, whereas the protein based coating material act as oxygen barrier layer for new film. Functional unit of this study was 1000 pouches made of traditional and new film. System boundary was factory to gate. The results of this study revealed that the new film shows better environmental performance for most of impact indicator than traditional film, except marine eutrophication and fine particulate matter formation due to extra coating process in new film system.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2004.11a
• /
• pp.277-282
• /
• 2004

본 연구에서는 환경경영의 중요한 수단으로 대두되고 있는 전과정분석(Life Cycle Analysis; LCA)을 통해 원자력 발전기술을 평가한 주요 사례의 분석과정과 결과들을 비교하였다. 이는 선진국들이나 글로벌 선진기업들에서 채택하기 시작한 글로벌 환경친화성의 입증 요구 추세 속에서, 모든 재화의 생산에 전력은 필수 투입물이라는 점에서 그 중요성을 감안하여 수행되었다. 본 연구에서는 국내 전력의 40% 이상 공급을 담당하고 있는 원자력발전 기술을 중심으로 비교하였다. 우리나라의 대표적인 연구를 간 비교 결과 그 값의 차이는 최대 10＾5 정도에 이르러, 이는 외국의 경우 10＾1 수준의 차이를 보이는 데 비해 다소 많은 것으로 조사되었다. 이러한 차이는 사례에 따라 모형의 단순화 정도에 기인한 것으로 판단되며, 이는 전력의 타산업 기반성이나 국내 전력LCA 분석능력의 함양이 중요하다는 점에 비추어 시급히 개선되어야 할 것이라 제안한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.7
• /
• pp.461-468
• /
• 2014

Biochar is a carbon rich solid produced by the pyrolysis of biomass such as energy crops, forestry residues, and wood wastes. Biochar returned to soil is to mitigate climate change and the feedstock of wood wastes reduces fossil fuel consumption as well as disposal costs. This study was practiced to evaluate a biochar system by gasification in terms of global warming regarding the soil application of the produced biochar. Life cycle assessment methodology was used to analyze the environmental impacts of the system, and the functional unit was 1 tonne of wood wastes. The result shows that the biochar system by using wood wastes as feedstock produces 4.048E-01 $kgCO_2-eq$ from the pre-treatment process as chipping and drying, 4.579E-01 $kgCO_2-eq$ from the pyrolysis process, and 9.070E-02 $kgCO_2-eq$ from the spreading to agricultural land, therefore total 9.534E-01 $kgCO_2-eq$ are generated. About 252 kg of $CO_2$ is still stored in the produced biochar in soil after carbon offsetting of the system. Therefore, the net carbon of the system is -251 kg of $CO_2-eq$.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.2
• /
• pp.139-146
• /
• 2014

In this research, we quantified the environmental load while using and not using secondary resources. During the process of primary processed product of metal resources (copper, aluminum), we applied LCA technique and analyzed by dividing into 8 environmental impact categories that affect the environment. Furthermore, we analyzed the greenhouse gas that occur during the process of primary processed product domestically and globally according to the changes of each metal resource's recycling rate. Consequently, when producing 1 ton of copper using secondary resources, the environmental effects were found to be 6.09E + 01 person-yr/f.u. and 7.23E + 01 person-yr/f.u. Additionally, as the recycling rate increased both globally and domestically, the amount of greenhouse gas decreased. Producing 1 ton of Aluminum using secondary resources, the environmental effects were found to be 2.34E + 02 person-yr/f.u. and 3.01E + 02 person-yr/f.u. Moreover, as the recycling rate domestically decreased, the amount of greenhouse gas increased, however the globally was decreased.

• Journal of the Korean housing association
• /
• v.14 no.5
• /
• pp.65-74
• /
• 2003

Recently, the environmental conservation has been emphasized over the world. Building industry should carefully reflected the development focused on the economic aspect as well as the environmental considerations. Therefore, it requires the technology development to mitigate the environmental pollution through the reducement of the energy and resources usage amount over the building life cycle. For these, it should be required to set up the analysis methodology to grasp the amount of the environmental pollution and energy and resources in each step of building life cycle. In this paper, it aimed at preparing the analysis process and analyzing the embodied energy and $CO_2$ and $SO_x$ emission according to the building work, field work, mechanical and electrical work on the new building and remodelling, utilizing the inventory analysis which is one of the LCA process.