• 제목/요약/키워드: 적합성 판정

검색결과 185건 처리시간 0.022초

X-ray Image Processing for the Korea Red Ginseng Inner Hole Detection (홍삼 내공검출을 위한 X-선 영상처리기술)

  • 손재룡;최규홍;이강진;최동수;김기영
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 한국농업기계학회 2002년도 동계 학술대회 논문집
    • /
    • pp.457-463
    • /
    • 2002
  • 이 연구는 x-선 투과영상을 이용하여 홍삼의 내공을 검출하기 위하여 수행되었다. 이를 위하여 x-선관에 조사되는 x-ray 양의 차이에 따른 위치별 밝기 값 차이를 보정하고 내공 검출에 적합한 영상처리 알고리즘을 개발하였다. 주요연구 결과를 요약하면 다음과 같다. 1) x-선관에 조사되는 x-ray양은 중심에서 가장자리로 갈수록 감소하며, 이것은 위치에 따른 gray 값의 분포가 달라지게 되는 원인이 되었다. 2) 홍삼을 2치화 하기 위해서는 동일한 x-선 조사강도에서 입력된 원 영상에서 빈 영상을 뺀 감산 영상을 만들어 줌으로써 가능하였다. 3) 조사강도 별 감산영상처리 결과 36kV/4.15mA와 39kV/4.15mA에서는 조사량이 많아서 홈삼 지근 부분의 영상이 손실되는 경우가 발생하였다. 4) 내공 검출을 위해서는 정상부분과 내공부분의 자기 값 차이를 크게 하는 전처리 영상을 만들 필요가 있었고, multiple 감산영상에서 뚜렷한 골짜기가 나타났으나 주근의 내공부분의 밝기값 보다 지근의 정상부분의 자기 값이 더 낮게 나타나 이를 보정하기 위하여 홍삼 위치에 따라 부분 보정된 알고리즘을 개발하였다. 5) x-선관의 놓인 위치에 따라서 내공판정시험 결과 중심에 있을 때에 비해 가장자리에 있을 때는 영상이 일부 손실되었으며, 중심 위치에서 서로 다른 굵기의 홍삼에 대해서는 모두 양호한 결과가 나타났다. 6) 완전한 홈삼으로 내공판정시험 결과 내공주위의 정상부분가지도 일부 내공으로 잘못 검출되었으나 이것을 재차 line profile에 의해 한 라인씩 문턱 값을 설정하여 내공만을 정확하게 판정하는 알고리즘을 개발하였다.양체의 접종작업은 모든 배양실이 인력에 의존하였으며, 배양체를 배지와 분리하여 불필요한 부분을 제거하고 배양작물에 따라 생육정도를 2~3등급으로 구분하여 배양용기의 배지 위에 치상하는 과정으로 수행되었으며, 작업능률은 호접란의 경우 배양병에 25본을 접종하는데 시간당 6병, 심비디움은 원형 플라스크에 25본을 접종하는데 시간당 10병 정도였다. 바. 식물체의 대량증식에 사용되는 플라스크, 배양병, PE용기 등 배양용기의 세척작업은 농원의 1개배양실에서 간이식 세척기, 이 외의 9개배양실은 모두 물에 담겨 두었다가 세제와 브러쉬 등을 사용하여 인력으로 세척하고 있어 생력화 기술개발이 요구되었다.도가 빠를수록 건조속도가 빨라졌으며, 건조에너지도 1,334kcal/kg.water로 비슷하게 소요되었다. 마. 시험구와 대비구의 건감률은 시험구에서 1.08~1.36w.b./h로 나타나 대비구보다 약 9.9~18.3%가 높게 나타났고, 건조에너지는 10.2~14.6%가 절감되었다. 발아율은 열풍온도가 낮을수록 높게 나타났고 시험구가 대비구보다 발아율이 낮게 나타났으며, 동할률 증가량도 원적외선.열풍 복합건조방법이 높게 나타나 이것은 곡물 표면에 원적외선 방사에의한 복사열이 전달되어 열장해를 받았기 때문으로 판단되며, 금후 더 연구하여 적정 열풍온도 및 방사체 크기를 구명해야 할 것이다.으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성

  • PDF

SSOP Program Development for HACCP Application in Fresh Raw Fish Manufacturing (싱싱회류 생산업체의 HACCP 적용을 지원하기 위한 SSOP Program 개발과 성과)

  • 박완희;이성학;정덕화
    • Journal of Food Hygiene and Safety
    • /
    • 제19권2호
    • /
    • pp.84-96
    • /
    • 2004
  • This study aims at developing an easily-applicable Sanitation Standard Operating Procedure(SSOP) program for Fresh raw-fish manufacturing. It compares the sanitation inspection results of SSOP-program-applied procedure and non-applied procedure. The samplings for bacteriological examination were collected from the touching surface of food and from the personal workers. The sanitation status was recorded in the check-up list. The results were statistically analyzed to ascertain the efficiency of the SSOP program. The present official KFDA check-up list for sanitation inspection is composed of 51 items. Each item is judged to be fit or unfit to the standards. When the unfit items are more than 6, the work-place is judged to be insanitary. But in this study, the results of sanitation inspection are scaled in points in the 70% allotment, and the results of bacteriological examination are scaled in points in 30%, totaling 100%. Below 60 scores are judged to be insanitary and administratively punished; 61-75 scores are judged to be average; 76-85 good; above 86 excellent. The sanitation inspection scores by the improved check-up list went up by two grades from 71.8 (before SSOP program) to 88.6 (after SSOP program). The results of bacteriological examination also improved from 57.5 to 98.2. The total scores of both results converted in the allotment of 70% and 30% also showed an improvement by two grades from 66.4 (before SSOP program) to 93.4 (after SSOP program). The above results show that the manufacturers participated in this study are following the 8 essential sanitary procedures which are needed to anchor the HACCP system.

The UV Images and Aging Judgement with Behaviors Caused by Surface Contamination on 22.9[kV] Class Insulators (22.9[kV]급 애자의 표면오염에 의한 자외선 영상과 열화판정)

  • Shong, Kil-Mok;Kim, Young-Seok
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • 제24권1호
    • /
    • pp.167-174
    • /
    • 2010
  • In this paper, the ultraviolet rays images and aging judgement caused by surface contamination on 22.9[kV] class insulators was defined. UV images represented by the corona discharge are divided 3 types such as sunflower, jellyfish, amoeba and in detail, there are classified the progress mechanism of eight. In the field which is installed the power facilities, immediately, this judgement method can be found out the deteriorated parts of the power facilities. These steps are possible to judge the deterioration of power facilities through reliable data. Hereafter, this study as the diagnostic technology suitable for the sites is used.

Improving Multinomial Naive Bayes Text Classifier (다항시행접근 단순 베이지안 문서분류기의 개선)

  • 김상범;임해창
    • Journal of KIISE:Software and Applications
    • /
    • 제30권3_4호
    • /
    • pp.259-267
    • /
    • 2003
  • Though naive Bayes text classifiers are widely used because of its simplicity, the techniques for improving performances of these classifiers have been rarely studied. In this paper, we propose and evaluate some general and effective techniques for improving performance of the naive Bayes text classifier. We suggest document model based parameter estimation and document length normalization to alleviate the Problems in the traditional multinomial approach for text classification. In addition, Mutual-Information-weighted naive Bayes text classifier is proposed to increase the effect of highly informative words. Our techniques are evaluated on the Reuters21578 and 20 Newsgroups collections, and significant improvements are obtained over the existing multinomial naive Bayes approach.

An Efficient symbol Synchronization Scheme with an Interpolator for Receiving in OFDM (OFDM 방식의 수신기를 위한 보간기의 효율적인 심볼 동기방법의 성능분석)

  • 김동옥;윤종호
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 한국해양정보통신학회 2002년도 춘계종합학술대회
    • /
    • pp.574-577
    • /
    • 2002
  • In this paper, we propose a new symbol time synchronization scheme suitable for the OFDM system with an interpolator. The proposed performs the following three steps. In the first step, the coarse symbol time synchronization is achieved by continuously measuring the average power of the received envelope signal. Based on this average power, the detection possibility for the symbol time synchronization is determined. If the signal is sufficient for synchronization, we next perform a relatively accurate symbol time synchronization by measuring the correlation a short training signal and the received envelope signal. Finally, an additional frequency synchronization is performed with a long training signal to correct symbol synchronization errors caused by the phase rotation. From the simulation results, one can see that the proposed synchronization scheme provides a good synchronization performance over frequency selective channels.

  • PDF

Case study for technical evaluation and check list to decision of optimized TBM (최적 TBM 장비 발주를 위한 선정 기준 및 체크리스트 사례 검토)

  • Kim, Ki-Hwan;Kim, Hyouk;Kim, Seong-Cheol;Kang, Si-On
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • 제23권6호
    • /
    • pp.385-392
    • /
    • 2021
  • When ordering a slurry shield TBM to be used for power cable tunneling, the client organizes an evaluation committee composed of experts, suggest the criteria and evaluation method for technical specifications for supplier selection, and based on the manufacturer's technical proposal were attempted to evaluate and select. It is expected to be referred to as a guideline for future projects to using Shield TBM as one of the methods of verifying performance and quality in advance and securing economic feasibility in the shield TBM tunneling in the recent increasing trend.

Analysis of the Correlation between Geological Characteristics and Water Withdrawals in the Laterals of Radial Collector Well (방사형집수정의 수평집수관에서 지질특성과 취수량의 상관관계 분석)

  • Kim, Tae-Hyung;Jeong, Jae-Hoon;Kim, Min;OH, Se-Hyoung;Lee, Jae-Sung
    • The Journal of Engineering Geology
    • /
    • 제24권2호
    • /
    • pp.201-215
    • /
    • 2014
  • This study was performed to investigate the correlation between hydraulic conductivity and the flow rate of an aquifer, with the flow rate calculated from the laterals of the radial collector well using data obtained by the development project of riverbank filtration (Second Phase) in Changwon City. The hydraulic conductivity was empirically calculated from unconsolidated sediments collected from a sandy gravel layer along the middle-to-downstream sections of the Nakdong River. The Beyer equation produced the most suitable hydraulic conductivity from the various empirical formulas employed. The calculated hydraulic conductivity ranged from 0.083 to 0.264 cm/s, with an average value of 0.159 cm/s, suggesting that the aquifer in the study area possesses a high permeability with a good distribution of sandy gravel. The relationship between the calculated hydraulic conductivity in the aquifer and the entrance velocity into the screen, the flow rate was analyzed through the linear regression analysis. From the result of regression analysis, it showed that the hydraulic conductivity and the entrance velocity into the screen and the flow rate have a linear regression equation having about 72% of the high correlation. The result of verification in the measured data between each variable showed a high suitability from being consistent with the approximately 72% in the linear regression analysis. This study demonstrates that the groundwater flow rate can be estimated within the laterals of the radial collector well using a linear regression equation, if the hydraulic conductivity of the aquifer is known. This methodology could thus be applicable to other aquifers with hydraulic conductivity and permeability parameters similar to those in the present study area.

Experiment to Select Materials for the Conservation and Restoration of a Glass Ewer, Korean National Treasure No.193 (국보 제193호 봉수형유리병의 재보존처리에 사용할 복원재료 선정 실험)

  • Hwang, Hyunsung;Koh, Minjeong;Lim, Sookyung;Lee, Dahae
    • Conservation Science in Museum
    • /
    • 제15권
    • /
    • pp.26-37
    • /
    • 2014
  • The Department of Conservation Science at the National Museum of Korea carried out conservation treatment on a prized glass ewer Designated as Korean National Treasure No.193 in order to enhance the ewer's structural stability and restore its true color and transparency. Prior to the conservation treatment, experiments were conducted on various materials e.g., Epoxy Resin, Acrylic Resin, Photopolymer Resin, Water Glass in order to select the most suitable materials for glass conservation. As a result, cyanoacrylate, acrylic, and photopolymer resin were found to be the most appropriate as adhesives, and acrylic resin was an appropriate restoration material. Notably, however, cyanoacrylate resin must not be used solely, and epoxy resin must be detachable.

Selection of Growth projection Intervals for Improving Parameter Estimation of Stand Growth Model (임분(林分) 생장(生長) 모델의 모수(母數) 추정(推定) 능력(能力) 향상(向上)을 위(爲)한 생장(生長) 측정간격(測定間隔)의 선택(選擇))

  • Lee, Sang Hyun
    • Journal of Korean Society of Forest Science
    • /
    • 제87권1호
    • /
    • pp.40-49
    • /
    • 1998
  • This study aimed to provide a strategy for selecting an adequate combination of growth intervals(i.e. times between age $T_1$ and age $T_2$) to be used to improve the reality of the growth equation through obtaining better precision of parameter estimates. Variety of growth functions were fitted to the data and one equation which best fitted the data was chosen for the analysis. A modified Schumacher projection equation, selected as a best equation, that included dummy variables representing locality as a predictor variable was fitted for basal area and height equations with nonoverlapping growth interval and all possible growth interval data sets of Douglas-fir(Pseudotsuga menziesii Mirb.Franco). The data were measured in all parts of the South Island of New Zealand. It was found that the precision of parameter estimates was increased in both basal area and height equations by using data set which contained a range of measurement intervals from short to long term.

  • PDF

New Reliability Criteria for Korean Workers' Health Examination Spirometry Results (근로자건강진단 폐활량검사에서 새로운 신뢰성기준 적용 결과)

  • Yong Lim WON;Hwa-Yeon LEE;Jihye LEE
    • Korean Journal of Clinical Laboratory Science
    • /
    • 제55권4호
    • /
    • pp.276-283
    • /
    • 2023
  • The Occupational Safety and Health Research Institute is currently evaluating spirometry tests used for worker health examinations by applying the 2005 American Thoracic Society (ATS) and European Respiratory Society (ERS) spirometric test standardization guide and reviewing the application of the 2019 ATS/ERS guide. To compare results obtained using the new evaluation criteria with previous results and determine whether it is appropriate to apply them to Korean workers' health examinations, we reviewed spirometry results from 325 special health examination institutions. Although evaluation criteria such as extrapolation volume, correction error, and forced inspiratory vital capacity were applied more strictly, institutions had higher reliability scores. Primarily because the acceptability and repeatability of forced expiratory volume in 1 second and forced vital capacity were judged separately, and thus, deduction width was reduced. The study shows that adopting the new evaluation criteria would reduce the possible use of inappropriate data, increase tester and doctor understanding of result selection and interpretation, increase result reliability, and reduce the testing burden.