• Korean Journal of Animal Reproduction
• /
• v.23 no.4
• /
• pp.281-291
• /
• 1999

The objective of this study was to optimize the freezing/thawing method of in vitro produced Hanwoo blastocysts. Day 7 blastocysts after IVF were vitrified using EFS40 (40% ethylene glycol, 18% ficoll, 0.3 M sucrose and 10% FBS added m-DPBS) as a freezing solution and electron microscope (EM) grid (V-G) or straw (V-S) as an embryo container. In both method, freezing/thawing were treated by 2-step, treatment time was required in V-G method and V-S method, for 2 min / 3 min and 3.5 min / 10 min, respectively. Embryo survival was assessed as re-expanded and hatched rates at 24 h and 48 h after warming, respectively. The results obtained in these experiments were summarized as follows: when the effect of exposure in vitrification solution and chilling injury from freezing procedure on in vitro produced expanded blastocysts were examined, at 24 h after warming, embryo survival in exposure group (100.0%) was not different compared to that in control group (100.0%), although those results were significantly different with two vitrified groups (V-G: 87.8, V-S: 77.8%) (P＜0.001). However, at 48 h after warming, hatched rates of V-G group (67.8%) were significantly higher than those of V-S group (53.3%) (P＜0.05). In addition, this hatched rate in V-G group was not different with that in exposure group (73.3%). When the effects of embryo developmental stage (early, expanded and early hatching blastocysts) and embryo container (EM grid and straw) to the in vitro survival of vitrified-warmed day 7 Hanwoo blastocysts were simultaneously examined, fast developed embryos were indicated the better resistance to freezing than delayed developed one, irrespective of embryo containers (early; 57.1 ＆ 24.4%, expanded; 84.7 ＆ 60.6%, early hatching; 91.7 ＆ 80.0%) (P＜0.001). Especially, in expanded and early hatching blastocysts, embryo survival of V-G group (67.8, 95.0%) was significantly higher than those of V-S group (53.0, 65.0%) at 48 h post warming, respectively (P＜0.05, P＜0.001). Therefore, this study indicates that Hanwoo blastocysts can be cryopreserved more simple, efficient and successful by vitrification method using EM grid.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1474-1481
• /
• 2011

This study investigated the physicochemical characteristics of Korean wheat flour substituted for 0%, 15%, 30%, 45%, and 60% durum rimachinata wheat in order to develop a Korean wheat pasta suitable for consumer-preferred soft textures. The particles of Korean wheat that were less than 250 ${\mu}M$ were 87.03% of all particles, while 68.7% of durum rimachinata had particles more than 250 ${\mu}M$ in size. Durum rimachinata had more protein (13.84${\pm}$0.03) and ash (0.70${\pm}$0.02) than Korean wheat. In farinograph characteristics, water absorption, development time, stability, and weakness increased as the amounts of substituted Korean wheat flour increased. Also, the gelatinization characteristics of the amylograph exhibited an increase of gelatinization temperature and decrease in maximum viscosity. However, maximum viscosity was shown to be more than 550 B.U. until 30% of the substitution level of Korean wheat flour to durum rimachinata wheat. Also, it did not affect the texture of the noodle product. We could make pasta with softness and springiness with less than a 15% substitution level of Korean wheat flour due to similar characteristics in cooking properties such as weight, volume, water absorption, turbidity, and cooking loss when compared to the control. L and a values increased, and the b value decreased in color as substitution amounts of Korean wheat flour increased. The hardness and adhesiveness of cooking noodles was shown to be a low value at more than a 30% substitution level of Korean wheat flour, and springiness, gumminess, and chewiness all exhibited high values. In a sensory evaluation, overall acceptability was shown to have the highest score in control. More than 30% of substitution of Korean wheat flour showed high preferences. Therefore, 15% of the substitution level of Korean wheat flour could be adapted in dough and cooking properties for making pasta-substituted Korean wheat. However, a texture analyzer and sensory evaluation of cooked pasta was shown to have a good quality at more than 30% substitution level of Korean wheat flour.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.99-106
• /
• 2002

Researches on integration of design and construction information from earlier era focused on the conceptual data models. Development and prevalent use of commercial database management system led many researchers to design database schemas for enlightening of relationship between non-graphic data items. Although these researches became the foundation fur the proceeding researches. they did not utilize the graphic data providable from CAD system which is already widely used. 4D CAD concept suggests a way of integrating graphic data with schedule data. Although this integration provided a new possibility for integration, there exists a limitation in data dependency on a specific application. This research suggests a new approach on integration for design and construction information, 'Product Model Centered Integration Methodology'. This methodology achieves integration by preliminary research on existing methodology using 4D CAD concept. and by development and application of new integration methodology, 'Product Model Centered Integration Methodology'. 'Design Component' can be converted into digital format by object based CAD system. 'Unified Object-based Graphic Modeling' shows how to model graphic product model using CAD system. Possibility of reusing design information in latter stage depends on the ways of creating CAD model, so modeling guidelines and specifications are suggested. Then prototype system for integration management, and exchange are presented, using 'Product Frameworker', and 'Product Database' which also supports multiple-viewpoints. 'Product Data Model' is designed, and main data workflows are represented using 'Activity Diagram', one of UML diagrams. These can be used for writing programming codes and developing prototype in order to automatically create activity items in actual schedule management system. Through validation processes, 'Product Model Centered Integration Methodology' is suggested as the new approach for integration of design and construction information.

• The Korean Journal of Mycology
• /
• v.27 no.1 s.88
• /
• pp.10-14
• /
• 1999

A single phase composter was constructed by modifying the conventional mixer of sawdust for the cultivation of oyster mushroom Pleurotus ostreatus. The machine was designed on the basis of 3-phase-1 system which was controlled in prewetting, pasteurization and fermentation processes. In composting 200 kg of straw and cotton waste in the machine, it took 20 minutes in prewetting step and also to hours at $65^{\circ}C$ in pasteurization process. Postfermentation by aerothermophiles was completed by treating the compost at $45^{\circ}C-50^{\circ}C$ for 48 hours which was shorten 24 hours from the conventional method. In the postfermentation at high temperature, forced aeration and/or vigorous mixing process(es) played a great role in the improvement of spawn quality. The growth of mycelium of oyster mushroom was excellent in the culture combinated with 3 parts of surface inoculation and 7 parts of mechanical mixing.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.4
• /
• pp.68-73
• /
• 2003

This study performed from 2002 October to 2003 April. The samples were taken at 66 sites, divided into the 6 sections functionally in the southern part of Seoul such as Yangchon-gu, Kangseo-gu, Kuro-gu, Yeongdengpo-gu, Kwanak-gu, Dongjak-gu, Seocho-gu, Kangnam-gu, Songpa-gu, and Kangdong-gu. The result of research showed that each property soil was pH 4.7∼9.5, Cd; 0.391 mg/kg (0.011∼l.081 mg/kg). Cu; 12.35 mg/kg (0.061∼73.62 mg/kg), Pb; 13.04 mg/kg (N.D.∼61.85 mg/kg), Hg; 0.0866 mg/kg (N.D.∼1.353 mg/kg), F; 206.8 mg/kg(47.1∼561.1mg/kg). The minimum and maximum of the concentration with functional soils were Cd; 0.632 mg/kg for multi-purposed soil,0.079 mg/kg for schools, Cu; 21.35 mg/kg for roadside, 2.159 mg/kg for schools, Pb; 24.70 mg/kg for roadside, 1.030 mg/kg for schools, Hg; 0.1780 mg/kg for multi purposed, 0.0087 mg/kg for schools. Especially F was the high concentration at the hills. Also the concentration of Cd, Cu, Pb, Hg and F at school Zone was detected such as low. area of schools area was detected the low concentrations as the items of Cd, Cu, Pb, Hg, and F. The average concentrations of metals and fluorine in the survey area were below the Preliminary Standard of the Soil Preservation Acts in Korea. To evaluate the soil quality of these area showed as a good qualified results. The results of SQPI (Soil Quality Pollution Index the qualified results as much as 86.4%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.200-208
• /
• 2010

The objectives of this study were to evaluate no-tillage cover crop cropping systems for organic farming in paddy. The experiment was performed at Ihyeon series (silt loam: 9.1% sand, 73.0% silt and 17.9% clay) which affected by different management practices. Planthopper population per 20 plant was significantly higher 65.3 for conventional tillage with chemical compounds (control) compared with 3.4~9.6 for no-tillage treatments (without rice straw or green manure, amended with rice straw, hairy vetch, rape, rye, and Chinese milk vetch). Also, disease severity of sheath blight was significantly higher 10.5% for control compared to 0.7~2.9% for no-tillage treatments. Four weed species, namely Monochoria vaginalis, Ludwigia prostrata, Rotala indica, and Aneilema keisak occurred in no-tillage paddy, whereas Monochoria vaginalis occurred in control only. The pH, available phosphate, and microbial biomass C in paddy were steeply decreased in response to submerging, but increased at first heading stage. Soil $NH_4$-N content at first heading stage was significantly higher in no-tillage treatments compared with control. The grain yield was significantly higher in 4.30 Mg $ha^{-1}$ for control than other treatments. Meanwhile, rice productivity was significantly higher in 2.69 Mg $ha^{-1}$ for no-tillage amended with Chinese milk vetch compared to other no-tillage treatments. The number of panicle per plant, grain number perpanicle, and percent ripened grain were highly related for increasing the yield of rice. These results show that Chinese milk vetch was optimum cover crop for organic farming in no-tillage paddy.

• Journal of Food Hygiene and Safety
• /
• v.27 no.2
• /
• pp.169-175
• /
• 2012

Five kinds of selective media, such as mannitol salt agar (MSA), Baird-Parker agar (BPA), Baird-Parker supplemented with rabbit plasma fibrinogen (BPA+RPF), CHROMagar Staphylococcus aureus (CSA), and Petrifilm Staph Express count system (Petrifilm), were compared to recommend the optimum selective media for isolation of Staphylococcus aureus from agricultural products. Seventy four target and non target bacteria were inoculated on five selective media to analyze sensitivity and specificity. In the recovery test of injured S. aureus cells, S. aureus was exposed to acid (1% lactic acid for 10 min), heat ($60^{\circ}C$ for 90s), and cold ($-20^{\circ}C$ for 1h) conditions. And artificially contaminated agricultural products (iceberg lettuce, green pepper, and cherry tomato) was enumerated on five selective media. The sensitivity of BPA+RPF, CSA, Petrifilm, MSA, and BPA were 100%, 100%, 100%, 90.5%, 90.5%, respectively. In addition, the specificity of BPA+RPF, CSA, MSA, BPA and Petrifilm were 100%, 100%, 84.6%, 75.0%, 67.3%, respectively. However, no difference among five selective media was observed in recovery on injured S. aureus cell and enumeration from agricultural products. This results suggest that BPA+RPF and CSA are the optimum media for detection of S. aureus from agricultural products.

• Journal of Food Hygiene and Safety
• /
• v.27 no.2
• /
• pp.161-168
• /
• 2012

This study was conducted to evaluate microbial contamination levels of Korea traditional rice cakes such as Sirutteok, Garaetteok and Gyeongdan in the manufacturing process and environment. The microbial contamination levels such as total aerobic bacteria, fungi, coliforms, Escherichia coli, Staphylococcus aureus, Bacillus cereus and Clostridium perfringens of rice cake products were analyzed. The contamination levels of total aerobic bacteria, coliforms, fungi and B. cereus in raw materials were in the range of 2.4~4.5, ND~1.9, 1.2~2.1 and 1.0~2.1 log CFU/g, respectively. The microbial contamination levels of total aerobic bacteria, coliforms, fungi and B. cereus in manufacturing process of rice cakes were increased in the soaking and grinding steps and were decreased in steaming step. E. coli, S. aureus and C. perfringens were not detected in any manufacturing process and environment. The microbial contamination levels of raw materials and final products of rice cake were suitable for microbial safety standard in Korea. However, the manufacturing environment such as equipments and employee's sanitation were in trouble for microbial safety. The results of this study suggest that safety educatio n for personal hygiene and safetymanagement in processing environment are continuously required to assure safety in working environment and employee's individual hygiene.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.44-51
• /
• 1991

The thermal resistance of the important microorganisms in takju. Korean traditional turbid alcoholic beverage, was measured and optimun heating time and temperature to achieve the commercial pasteurization of these microorganisms were examined. Most of the vegetative bacterial cells in takju were destroyed by heating at over $60^{\circ}C$, except for the spore forming organisms, which did not actively grow in takju after pasteurization. The important microorganisms for the quality deterioration of pasteurized takju were then appeared to be yeast and molds, and their thermal resistances were measured. The thermal resistances of these microorganisms changed greatly depending upon the heating method. The D values of yeast in takju were 3.5 min at $65^{\circ}C$ and 0.46 min at $80^{\circ}C$ in cap-tube, and 7.1 sec at $65^{\circ}C$ and 2.3 sec at $80^{\circ}C$ in a continuous coil heat exchanger. Those of molds were 2.7 min at 65℃ and 0.25 min at $80^{\circ}C$ in cap-tube, and 3 sec at $65^{\circ}C$ and <1 sec at $80^{\circ}C$ in the coil heat exchanger. The acidity and pH did not change at $30^{\circ}C$ for two weeks after pasteurization by heating in the coil heat exchanger at $65^{\circ}C$ for 17 sec, but the viscosity increased slightly by the heat treatment. Significant differences in sensory quality, especially the formation of burnt smell and bitterness by heating takju for 12D of yeast at $70,\;80\;and\;85^{\circ}C$, respectively, were observed and this resulted in the significant reduction in overall likeness of pasteurized takju. However, when the heating temperature was fixed to $80^{\circ}C$, the overall likeness of pasteurized takju did not affected significantly by the heating time ranging from 8D to 12D of yeast. It was concluded that the optimum pasteurization condition of takju in a continuous heat exchanger was heating at $80^{circ}C$ for 23sec(10D of yeast).

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.19-26
• /
• 2007

Purpose: To compare of the accuracy among various measurement procedures of HDR Brachytherapy, and to evaluate the clinical suitability and usefulness of alternative PMMA (polymethylmethacrylateplastics: $C_5H_8O_2$) plate phantom without any additional cost due to the purchase of measuring apparatus. Materials and Methods: We made a comparative study on three types of measuring systems: well type chamber, source calibration jig, and PMMA plate phantom. Farmer type chamber was used for source calibration jig method and PMMA plate phantom method. Measurement was done 5 times each in comparison with the measurement values from manufacturer. Measurement results from experiment were compared with that from the manufacturer which is offered with the source whenever a source is substituted by a new one and evaluate the accuracy of source activity. Results: As a consequence of Ir-192 source measurement using well type chamber, source calibration jig and PMMA plate phantom, RMS (Root Mean Square) values for the relative error are 0.6%, 1.57%, 2.1%, respectively, compared with the data from manufacturer. And the mean errors with standard deviation are given $-0.2{\pm}0.5%$, $0.97{\pm}1.23%$, $-0.89{\pm}1.87%$ respectively. Conclusion: From the results shown by the three types of measurement system (well type chamber, source calibration jig, and PMMA plate phantom), the measurement with well type chamber produced the best accuracy. It turns out that we can also use the alternative system of PMMA plate phantom clinically without purchasing any additional particular apparatus since the system does not exceed the recommendation of AAPM (American Association of Physicists in Medicine), which requires the error range of within ${\pm}5%$.