• Journal of Food Hygiene and Safety
• /
• v.38 no.2
• /
• pp.46-54
• /
• 2023

In this study, we examined the residual amounts of formaldehyde in hygiene products to determine the safety of these products in Gyeonggi-do. Formaldehyde is among the harmful substances that may remain within certain hygiene products. On the basis of an analysis of formaldehyde in a total of 222 items (6 disposable paper straws, 9 disposable paper napkins, 21 toilet papers, 13 disposable dishcloths, 16 disposable paper towels, 32 wet wipes for food service restaurants, 25 disposable cotton swabs, and 100 disposable diapers), we detected traces in three wet wipes for food service restaurants (1.87 to 4.45 mg/kg), which is approximately 9% to 22% of the standard level (20 mg/kg). We established that all the hygiene products assessed in the study met the individual standards for formaldehyde, thereby confirming that safe products are being distributed. In the standards and specifications for hygiene products, the formaldehyde test method is regulated for application with respect to three categories based on the type of product. The samples used in this study were of types for which method 1 or method 2 is applied, and the limits of detection, limits of quantification, linearity, and recovery rates were reviewed to verify the validity of each test method. When method 2 was applied, we experienced interference when performing analysis at a wavelength of 412 nm, which was associated with the influence of impurities in some samples of disposable cotton swabs and disposable diapers. Consequently, in these cases, the results were compared after analysis using method 1. By comparing the results obtained using method 2 with those obtained using method 1, the latter of which were unaffected by the interference of impurities, we were able to detect formaldehyde at low concentrations. These findings accordingly highlight the necessity to standardize the formaldehyde test method for future analyses.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.5
• /
• pp.13-29
• /
• 2023

Urban parks are social infrastructure supporting citizens' health, quality of life, and community formation. As the proportion of urban parks that have been established for more than 20 years is increasing, the need for refurbishment to improve the physical space environment and enhance the functions of aging urban parks is increasing. Since the government's refurbishment of aging urban parks has limitations in securing financial resources and promoting attractiveness, they must be promoted through public-private partnerships. Japan, which suffered from the problem of aging urban parks, has successfully promoted several park refurbishment projects by introducing the Park-PFI through the revision of the 「Urban Park Act」 in 2017. This study examines and analyzes the characteristics of the Japan Park-PFI as an alternative to improving the quality of aging domestic urban park services through public-private partnerships and the validity of the aging urban park refurbishment projects through Park-PFI. The main findings are as follows. First, it is necessary to start discussions on introducing Japan's Park-PFI according to the domestic conditions as a means of public-private partnership to improve the service quality and diversify the functions of aging urban parks. In order to introduce Park-PFI social discussions and follow-up studies on the deterioration of urban parks. Must be conducted. The installation of private capital and profit facilities and improvements of related regulations, such as the 「Parks and Green Spaces Act」 and the 「Public Property Act」, is required. Second, it is judged that the Park-PFI project is a policy alternative that can enhance the benefits to citizens, local governments, and private operators under the premise that the need to refurbish aging urban parks is high and the location is suitable for promoting the project. As a result of a pilot application of the Park-PFI project to Seyeong Park, an aging urban park located in Bupyeong-gu, Incheon, it was analyzed to be profitable in terms of the profitability index (PI), net present value (FNPV), and internal rate of return (FIRR). It is considered possible to participate in the business sector. At the local government level, private capital is used to improve the physical space environment of aging urban parks, as well as the refurbishment of the urban parks by utilizing financial resources generated by returning a portion of the facility usage fees and profits (0.5% of annual sales) of private operators. It was found that management budgets could be secured.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.3
• /
• pp.97-113
• /
• 2023

In order to generalize the social entrepreneurship model with cooperation orientation and increase the possibility of using the model, this study developed a measurement tool and tested it with 389 executives of social enterprises. For the development of the measurement tool, preliminary measurement items were formed through review of previous studies, and a questionnaire was tentatively composed of 40 measurement items in five areas through an expert panel review of the measurement items. A total of 389 questionnaires were collected by conducting a questionnaire survey targeting Korean social enterprise managers, and exploratory and confirmatory factor analysis were conducted using 375 questionnaires that could be analyzed. Five factors for 24 items were derived through exploratory factor analysis and reliability analysis. Through a series of analysis processes including primary and secondary confirmatory factor analysis, the model fit of the newly constructed social entrepreneurship research model was confirmed, and the validity and reliability of the measurement tools were verified. As a result of this study, the model fit of the social entrepreneurship model(social value orientation; innovativeness; pro-activeness; risk-taking; cooperation orientation) is verified, thereby improving the theoretical explanatory power of social entrepreneurship research and at the same time providing the basis and basis for theoretical expansion of follow-up research. The study proved the possibility of generalizing the social entrepreneurship model with added cooperation orientation, and at the same time, the measurement tool used in this study was widely used as a tool to measure social entrepreneurship theoretically and practically. In addition, it was confirmed that the cooperation orientation is manifested in corporate decision-making and activity behaviors for resource mobilization and capacity building, opportunity and performance creation, social capital and network reinforcement, and governance establishment of social enterprises.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.61-71
• /
• 2024

In this study, we analyzed chlorogenic acid indicator components in preparation for the additional listing of green coffee bean extract in the Health Functional Food Code and optimized caffeine for simultaneous analysis. We extracted chlorogenic acid and caffeine using 30% methanol, phosphoric acid solution, and acetonitrile-containing phosphoric acid and analyzed them at 330 and 280 nm, respectively, using liquid chromatography. Our analysis validation results yielded a correlation coefficient (R²) revealing a significance level of at least 0.999 within the linear quantitative range. The chlorogenic acid and caffeine detection and quantification limits were 0.5 and 0.2 ㎍/mL and 1.4, and 0.4 ㎍/mL, respectively. We confirmed that the precision and accuracy results were suitable using the AOAC validation guidelines. Finally, we developed a simultaneous chlorogenic acid and caffeine analysis approach. In addition, we confirmed that our analysis approach could simultaneously quantify chlorogenic acid and caffeine by examining the applicability of each formulation through prototypes and distribution products. In conclusion, the results of this study demonstrated that the standardized analysis would expectably increase chlorogenic acidcontaining health functional food quality control reliability.

• Korean Journal of Environment and Ecology
• /
• v.22 no.6
• /
• pp.691-706
• /
• 2008

This study analysed problems of railroadside buffer green space and suggested planting methods according to space function and planting concept in seashore reclaimed land, Ansan city. Planting density of railroadside buffer green zone of Ansan city was $0.04{\sim}0.17tree/m^2$, GVZ was $0.15{\sim}1.65m^3/m^2$ which is represented of deficiency of buffer function. In addition, soil hardness of mounded buffer green zone was $2.72{\sim}15kg/cm^2$. It was examined to have functions in terms of habitat for wildbirds and other organisms, surrounding landuse, urban greens, seasonality, landscape for function improvement of buffer green space. Functions of buffer green space were re-established as habitat for organism, buffer and landscape improvement, landscape and urban park, buffer zone and habitat. It was suggested to select Pinus thunbergii as a dominated species of planting method for buffer function and planting density in canopy and under-canopy layer was $0.4tree/m^2$, $0.5/m^2$ in shrub layer. In terms of landscape improvement function, Zelkova serrata, Prunus sargentii and Prunus armeniaca were selected as major species and it in canopy and under-canopy layer was $0.2tree/m^2$ and $0.5tree/m^2$ in shrub layer. In terms of habitat function Quercus acutissima, Prunus sargentii and Sorbus alnifolia were as major species and it in canopy layer was $0.06tree/m^2$, $0.1tree/m^2$ in under canopy layer, $0.8tree/m^2$ in shrub layer.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.539-551
• /
• 1996

In this study, a number of distance-dependent competition indices on tree-level which incorporate the tree sizes and distances to competitors, and traditional stand-level density measures were estimated from the data compiled with position-dependent survey in a Pinus densiflora stand. The performance of the estimated competition indices was examined by comparing the relationship with the diameter growth, and a dbh growth function, in which the competition index is considered as a one of influence factors, are developed. In the searching method of competing trees, the competition index estimated with $30^{\circ}$ competition interrupting angle showed the highest correlation with the annual dbh growth, while the expanding the competing zone distance had no significant effect on the performance of competition index in estimating annual dbh growth. The most of the examined stand-level competition indices, based on distance-dependent single-tree competition indices, were evaluated to describe similarly the stand competition status. As a result of partial correlation analysis in which the effect of age and site index are eliminated, Alemdag's mean competition index and relative spacing index were determined to have the highest correlation with dbh. The relative spacing index, which can be easily measured in field without measuring the position of individual trees, was considered to be a better suited one for estimating mean dbh of a stand. Among distance-dependent competition indices on tree-level, Hegyi's competition index showed the best performance in their correlation with annual dbh growth, if eliminated the effect of site index and dbh. This enabled to derive the following annual dbh growth function of individual trees which incorporate age, dominant height, dbh and Hegyi's competition index as influence factors : $$dbh^{\prime}=3.975362676{\cdot}age^{-1.099274613}{\cdot}ho^{0.199893990}{\cdot}dbh^{0.269430865}{\cdot}HgCI^{-0.353643587}$$ This function is coincided to the growth principle in which site index has a positive effect on the annual dbh growth, while high age or competition causes to reduce the annual dbh growth, and can be used as a function in single tree growth model.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.1 s.43
• /
• pp.81-97
• /
• 2007

This study investigated the Present status of laboratories for experiment and practice, and analyzed teachers' recognitions on experiment and practice for Home Economics area of a Technology and Home Economics curriculum according to majors of teachers. Questionnaires were mailed to middle school teachers who taught home economics part and they answered on the web. 220 replies were used for the final analysis. The findings were as follows: First, the facilities and teaching equipments of laboratories for home economics area were inferior, especially, for clothing and textiles part and housing part. Second, teachers recognized necessity to conduct experiment and practice highly. Food life part scored the highest, while housing part scored the lowest. Teachers who majored in home economics recognized more necessities of experiment and practice than teachers who didn't majored in home economics. Third, they recognized level of experiment and practice to be suitable to students, but 'maintenance and repair of housing' section was relatively less suitable than other sections. Fourth, 'making clothes and recycling' section was recognized to have the least suitability in quantities and hours of experiment and practice lesson, because of too much contents and lack of lesson hours. Fifth, teachers recognized that students were more interested in 'the basis of food preparation and practice' section, but they are less interested in 'maintenance and repair of housing' section. Sixth, teachers recognized that contents of experiment and practice were very useful to the real life. 'The basis of food preparation and practice' section was the most useful, while 'maintenance and repair of housing' section was the least useful. Seventh, experiment and practice lessons for food life part were put in practice very well, followed by the order of clothing and textiles part and housing part. Teachers who majored in home economics usually took more experiment and practice lessons than teachers who didn't major in home economics.

• Korean Journal of Food Science and Technology
• /
• v.6 no.2
• /
• pp.98-108
• /
• 1974

Fourteen varieties of Korean chestnut were subjected to the test of adaptability for processing and the possibilities of colored products development. The fruit size of Korean chestnut ranged $11{\sim}18g$ and these small fruits could not be expected to be utilized for the processing of Marron glaces which requires larger size as $25{\sim}30g$. As the storge period is extended the discoloration tendency of chestnut flesh was increasingly developed, however, the fresh chestnut has shown layer-separating phenomenon and ragged surface of fruit which delivers disagreeable appearance to the finished product. The principal factors of discoloration occurred during processing were the behavior of tannin and darkening rate shown on flesh differed each other among varieties; the Chukpa and Yuma variety have exhibited the most serious discoloration and the Taab-b variety, the lightest. Taab-b variety in this connection could be expected to be available for Kanroni processing. For the industrialization of chestnut processing the flame-scorched peeling method is advisable. The capacity of this method is proportional to the square of scorching radius and highly flexible in controlling its performance. As for the processing of colored product, the sugar dehydration and coating and the sugar penetration method demand further study in basical views; however, the canned product of chestnut-redbean has shown the possibility of being utilized as a substitute for or paralleled use with the sugar-syruped canned product which so far has been considered as the only item of export to Japan.

• Journal of Science Education
• /
• v.44 no.1
• /
• pp.92-111
• /
• 2020

The 2015 revised science curriculum and NGSS (Next Generation Science Standard) suggest computational thinking as an inquiry skill or competency. Particularly, concern in computational thinking has increased since the Ministry of Education has required software education since 2014. However, there is still insufficient discussion on how to integrate computational thinking in science education. Therefore, this study aims to prepare a way to integrate computational thinking elements into scientific inquiry by analyzing the related literature. In order to achieve this goal, we summarized various definitions of the elements of computational thinking and analyzed general problem solving process and scientific inquiry process to develop and suggest the model. We also considered integrated problem solving cases from the computer science field and summarized the elements of the Computational Thinking-Scientific Inquiry (CT-SI) model. We asked scientists to explain their research process based on the elements. Based on these explanations from the scientists, we developed 'Problem-finding' CT-SI model and 'Problem solving' CT-SI model. These two models were reviewed by scientists. 'Problem-finding' model is relevant for selecting information and analyzing problems in the theoretical research. 'Problem solving' is suitable for engineering problem solving process using a general research process and engineering design. In addition, two teachers evaluated whether these models could be used in the secondary school curriculum. The models we developed in this study linked with the scientific inquiry and this will help enhance the practices of 'collecting, analyzing and interpreting data,' 'use of mathematical thinking and computer' suggested in the 2015 revised curriculum.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2006.08a
• /
• pp.47-68
• /
• 2006

This study aims to determine the association structure of the behavioral relationship variables, such as trust, commitment, cooperation, communication and coercive power, in the relationship between the buyers and suppliers of industrial parts. It also investigates the impact of the use of IT technologies on the relationships quality. Data was collected from 216 part suppliers of machinery, electronics and automobiles located in Incheon. Data supported all of the proposed hypotheses. First, it was confirmed that parts suppliers' trust in buyers leads to the commitment into relationships with buyers. Second, cooperation and communication showed a positive influence on parts suppliers' trust in buyers, and coercive power gave a negative influence on trust. Third, the use of IT technologies like Internet and E-Mail between parts suppliers and buyers was verified to have generally a positive influence on the quality of relationships. At the same time, cooperation and communication were confirmed to have a positive influence on each other, and cooperation and coercive power as well as communication and coercive power were confirmed to have negative influence on each other. This study is a pioneering attempt to examine the relationships between suppliers and buyers of industrial parts, and the influence IT technologies on the relationship quality. Also, the findings will be practically much helpful to find how to reinforce the relationships between parts suppliers and buyers.