• Composites Research
• /
• v.18 no.4
• /
• pp.52-58
• /
• 2005

A cyclocopter propelled by the cycloidal blade system, which can be described as a horizontal rotary wing, is a new concept of VTOL vehicle. In this paper, optimized structure design is carried out for the aerodynamically optimized cyclocopter rotor system. Database is obtained fer design variables such as stacking sequence (ply angles), number of plies and spar locations through MSC/NASTRAN and optimum values are determined by RSM and some other optimizing processes. For the rotor system including optimized blade and composite hub m, the maximum stress by static analysis is within the failure criteria. And the rotor system is designed for the purpose of avoiding possible dynamic instabilities by inconsistency between frequencies of rotor rotation and some low natural frequencies of rotor.

• Composites Research
• /
• v.12 no.4
• /
• pp.33-41
• /
• 1999

In this paper, a simple but accurate method of vibration analysis of structural elements with or without attached mass/masses is presented. The method used has been developed by D.H., Kim since 1974. This method is very effective for the plates with arbitrary conditions and irregular sections. This method is applied to the special orthotropic plate with two opposite edges simply supported and the other two opposite edges free. Such plate represents the most of the simply supported bridges/decks, including concrete and girders-cross beam systems. Detailed illustration is given for beams and plates for easy understanding. Some laminate orientation for which the special orthotropic equations can be applied are identified.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.2
• /
• pp.83-88
• /
• 2006

AC loss is one of the main research area in AC power application using high temperature superconductor(HTS), such as HTS transformer, HTS current limiter and HTS cable, because it is closely related to efficiency, economic estimation and design of power device. A lot of research for various arrangements of HTS tapes have been performed to increase a capacity of transport current because single HTS tape can not satisfy the demanded current capacity in HTS power application. In this paper, we studied magnetization loss by different several arrangements of BSCCO tapes such as Edge-to-Edge type, Face-to-Face type and Matrix type through numerical analysis by 2D-FEM and measurement. As a result, we got the result that the magnetization loss of Face-to-Face type arrangements was lower than those of other arrangement types under the conditions of the same stacking number. We think that the result was due to shield effect by demagnetization of adjacent HTS tapes which are located face to face.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.2
• /
• pp.20-25
• /
• 2011

In this paper, two dimensional concrete slabs for a railroad bridge were analyzed by the specially orthotropic laminates theory. Both the geometrical and material property of the cross section of the slab was considered symmetrically with respect to the neutral surface so that the bending extension coupling stiffness, $B_{ij}$ = 0, and $D_{16}=D_{26}=0$ Bridge deck behaves as specially orthotropic plates. In general, the analytical solution for such complex systems is very difficult to obtain. Thus, finite difference method was used for analysis of the problem. In this paper, the finite difference method and the beam theory were used for analysis.

• Journal of Korea Foundry Society
• /
• v.27 no.5
• /
• pp.209-211
• /
• 2007

최근에는 탄소섬유강화복합재료(CFRP)는 우수한 기계적인 물성치와 수월한 설계특성으로 인해 우주.민간 항공산업분야 뿐만 아니라 여러분야에 응용성이 매우 높다. 그러나 CFRP 복합적층판으로 제작된 구조물은 충격손상을 받을 시에는 50-75%치 강도가 낮아지는 취약성을 가지고 있다. 따라서 본 연구에는 CFRP복합재의 구조건전성 및 결함여부를 비파괴적으로 검사 및 탐상을 하기 위해서 시도하였다. 특히, C-scanner의 수침조에서 충격손상을 받은 시험편을 집어넣어 자동 데이터 획득 시스템을 구동하여 현장응용성이 가장 높은 일 방향 초음파측정 (one-sided ultrasonic measurement) 방법인 평가기법을 제안하였다. 본 연구에서 제안한 일방향 초음파 피치캐치방법이 CFRP 복합적층판내에서 일반 수직 초음파 탐상기법보다 훨씬 민감함을 알 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.37.2-37.2
• /
• 2009

다이렉트 프린팅 방식에 대한 수요가 높아지면서 마이크로 노즐에 대한 수요도 높아지고 있다. 마이크로 노즐은 Nano particle deposition system (NPDS)에서 가장 중요한 부분으로 금속이나 세라믹 분말을 음속으로 가속시키는 역할을 한다. 또한 마이크로 노즐은 마이크로 스페이스 셔틀과 주사바늘이 없는 약물 주사 시스템 등의 많은 분야에서 사용 가능하다. 이러한 마이크로 노즐은 대부분 기계적 절삭법을 이용하여 알루미늄으로 만들어져왔다. 하지만 알루미늄으로 만들어진 마이크로 노즐은 경도가 낮아 세라믹 나노 입자를 적층하는 것에 적절치 못하며 사용가능한 수명이 짧다는 단점을 가지고 있다. 또한 가장 큰 단점으로 노즐목을 1mm이하로 제작하는 것이 어렵다는 것이다. 따라서 본 연구에서는 Si wafer를 Deep RIE 방식을 이용하여 3차원적으로 제작하였다. Deep RIE 방식 중 BOSCH process를 이용하였다. 이렇게 만들어진 마이크로 노즐은 다이렉트 프린팅 방식중 하나인 NPDS에 적용하였다. Si wafer로 만들어진 마이크로 노즐이 적용된 NPDS를 이용하여 graphite 분말을 가속하여 적층 실험을 실시하였다 이와 함께 전산 유체 역학(CFD)를 이용하여 마이크로 노즐일 이용한 초음속 가속 가능 여부를 판단하였다. 전산 유체 역학은 유한 요소법을 이용하여 유체의 거동을 시뮬레이션을 통하여 예측하는 것으로 마이크로 노즐 내에서 유체의 흐름을 예상할 수 있다. 실제 실험의 결과와 전산 유체 역학을 이용한 시뮬레이션 결과dml 비교 분석을 실시하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.74-75
• /
• 2016

Various types of microstrip antennas can be used for many applications in wireless communication systems. In this paper, we studied a design method for a broadband dual-fed stacked microstrip patch antenna. The impedance bandwidth is improved by adjusting the sizes of main radiating patch and parasitic patch, the distance between the patches, the length of inset feed line, etc. The antenna is designed by simulation for an operation in the frequency range of 2.3-2.7 GHz, and the antenna characteristics such as return loss, gain, radiation patterns are examined.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.53-59
• /
• 2022

In this study, an enhanced first-order shear deformation theory is proposed to efficiently and accurately predict the thermo-mechanical-viscoelastic coupled behavior of laminated composite structures. To this end, transverse shearstress and displacement fields are independently assumed, and the strain-energy relationship between these fields issystematically established using the mixed variational theorem (MVT). In MVT, the transverse shear stress fields are obtained from the third-order zigzag model, whereas the displacement fields of the conventional first-order model are considered to amplify the benefits of numerical efficiency. Additionally, a transverse displacement field with a smooth parabolic distribution is introduced to accurately predict the thermal behavior of composite structures. Furthermore, the concept of Laplace transformation is newly employed to simplify the viscoelastic problem, similar to the linear-elastic problem. To demonstrate the performance of the proposed theory, the numerical results obtained herein were compared with those available in the literature.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.1-7
• /
• 2022

Recently, satellites equipped with high-performance electronics have required higher power consumption because of the advancement of satellite missions. For this reason, the size of the solar panel is gradually increasing to meet the required power budget. Increasing the size and weight of the solar panel is one of the factors that induce the elastic vibration of the flexible solar panel during the highly agile maneuvering of the satellite or the mode of vibration coupling to the satellite or the mode of vibration coupling to the micro-jitter from the on-board appendages. Previously, an additional damper system was applied to reduce the elastic vibration of the solar panel, but the increase in size and mass of system was inevitable. In this study, to overcome the abovementioned limitations, we proposed a high -damping yoke structure consisting of a superplastic SMA(Shape Memory Alloy) laminating a thin FR4 layer with viscoelastic tape on both sides. Therefore, this advantage contributes to system simplicity by reducing vibrations with small volume and mass without additional system. The effectiveness of the proposed superelastic SMA multilayer solar panel yoke was validated through free vibration testing and temperature testing using a solar panel dummy.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.44.2-44.2
• /
• 2010

차세대 태양전지로써 플렉서블 태양전지에 대한 연구가 활발하다. CIS 박막태양전지의 경우도 Glass base 태양전지 시스템 연구와 더불어 금속과 플라스틱 등 연성 기판재를 이용한 전지 시스템에 관한 연구가 진행 되고 있다. 그러나 태양전지의 핵심 부자재라고 할 수 있는 기판재에 대한 체계적인 연구는 미흡한 실정이다. 특히 플렉서블 박막태양전지용 기판재와 그 위에 적층되어 태양전지를 구성하는 박막 소재의 열팽창 거동들 사이에 차이가 있어 태양전지 시스템에 결함을 야기할 수 있다. 본 연구에서는 플렉서블 태양전지용으로 적용되거나 연구되고 있는 SUS 300 계열과 SUS 400번 계열을 중심으로 철계 연성 기판재의 열팽창 거동을 비교 분석하였다. 그리고 CIS 박막태양전지 제조 공정인 고온 박막 생성 공정의 열분석을 통해 기판재의 성능을 평가 하였다.