• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.173-176
• /
• 2012

This paper introduces a novel horn antenna for circular polarization using a planar-type radiator. This antenna can be divided to two parts, microstrip antenna and square horn. The microstrip antenna has the role of feeder and polarizer of the horn antenna, and it is designed to stacked type having metal spacer for high gain, high isolation and wideband characteristic. Using the proposed antenna structure, the horn antenna needs not additional structure such as feeder and polarizer, and the size of it can be considerably reduced. The horn antenna has typical gain of 8dBi and 3-dB axial-ratio bandwidth around 4.9%.This antenna can widely used for various antenna system for mobile and satellite communication using circular polarization expecially in high frequency band.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.4
• /
• pp.266-272
• /
• 2016

This paper presents the investigation of the propagation behavior of bulk longitudinal waves generated by an ultrafast laser system in thin films. A train of femtosecond laser pulses was focused onto the surface of a 150-nm thick metallic (chromium or aluminum) film on a silicon substrate to excite elastic waves, and the change in thermoreflectance at the spot was monitored to detect the arrival of echoes from the film/substrate interface. The experimental results show that the film material characteristics such as the wave velocity and Young's modulus can be evaluated through curve-fitting in numerical solutions. The material properties of nanoscale thin films are difficult to measure using conventional techniques. Therefore, this research provides an effective method for the nondestructive characterization of nanomaterials.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.354-358
• /
• 2006

A silicon lens and an insulator of pyrex, components of a micro-electron column, should be assembled by aligning and stacking simultaneously. An optical alignment of a diffraction beam and a laser welding were employed for the assembly of a source lens and an Einzel lens with precision within $\pm$4% for the maximum aperture size. The experimental condition for optical alignment and laser welding are explained. Anodic bonding was used to assist in stacking lenses. A micro-electron column of smaller apertures assembled with precise alignment and fabrication was tested with a current image of a Cu grid of 9$\mu$m in linewidth, and showed a higher resolution in acceleration mode.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.93-96
• /
• 2000

The theory of non-prismatic folded plate structures was reported by the senior author in 1965 and 1966. Fiber reinforced composite materials are strong in tension. The structural element for such tension force is very thin and weak against bending because of small bending stiffnesses. Naturally, the box type section is considered as the optimum structural configuration because of its high bending stiffnesses. Such structures can be effectively analyzed by the folded plate theory with relative ease. The "hollow" bending member with uniform cross-section can be treated as prismatic folded plates which is a special case of the non-prismatic folded plates. Tn this paper, the result of analysis of a folded plates with one box type uniform cross-section is presented. Each plate is made of composite laminates with fiber orientation of [ABBCAAB]$_r$, with A=-B=$45^{\circ}$, and C=$90^{\circ}$. The influence of the span to depth ratio is also studied. When this ratio is 5, the difference between the results of folded plate theory and beam theory is 1.66%. is 1.66%.

• Composites Research
• /
• v.15 no.2
• /
• pp.18-23
• /
• 2002

The absorption and the interference shielding of the problems thor both commercial and military purposes. In this study, the minimization of the electromagnetic wale reflections using composite layers with different dielectric properties was performed. Dielectric constants were measured for glass/epoxy composites containing conductive carbon blacks and carbon/epoxy fabric composites. Using the measured permittivities of the composites having various carbon black contents, the optimal electromagnetic wave absorbing structure in X-band(8.2GHz-12.4GHz) was determined. The optimal multi-layered composite plates have the thickness of 2.6mm. The maximum reflection loss is -30dB at 10GHz, and the bandwidth haying the absorptivity lower than -l0dB is about 2GHz.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.89-95
• /
• 2004

CDMA is the way that more than one users can share the time and frequency at the same time and connect with multiple access in mobile communication. Multiple Access is indispensible for mobile communication because the limited frequency is able to be used by many users in mobile communication. CDMA is also applied to home network, military, business and medical sectors. This paper, presents a users should share limited frequency resource. CDMA module implemented with 8-layer PCB which consists of the Slice-board circuit, keeping Radio frequency characteristics and a slot type connector.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.112-121
• /
• 2005

본 연구는 2003년부터 2005년까지 2년간 에너지관리공단의 선행연구과제로서 진행되었으며 20 Watt 급 소형 연료전지에 수소를 공급할 수 있는 소형의 마이크로 채널 메탄올 개질장치를 개발하는 것을 목적으로 하였다. 개질장치는 개질기 본체, 여기에 반응열을 공급 해주는 촉매 연소기 그리고 연료를 증발시켜 주는 연료증발기의 세부분으로 구성되며 각 반응기의 개발 및 통합을 수행하였다. 반응기는 반응면적을 증가시키기 위하여 폭 $200{\sim}5000{\mu}m$, 필이 $200{\sim}5000{\mu}m$ 규모의 마이크로 채널 유로를 금속 박판을 화학 에칭하여 구현하였으며 이를 수십장 적층하여 전체 반응기를 제작하였다. 마이크로 채널표면에 내부 촉매 지지체를 먼저 코팅한 후 촉매를 코팅하는 방법을 사용하여 담지체 코팅으로 기하학적 표면적 대비 표면적이 10 배 이상 향상되는 우수한 결과를 얻을 수 있었고 촉매의 내구성이 월등히 향상 되었다. 저온 활성 촉매를 사용하여 $350^{\circ}C$ 이하에서 메탄을 전환율 90% 이상을 구현하였다. 실제 운전 후 측정 결과 개질 반응기의 부분별 온도차가 $20^{\circ}C$ 이내로 설계의 우수성을 확인하였다. 촉매 연소기를 이용한 개질 반응열 공급장치를 개발하여 20Watt 급 수소 생산을 위한 개질 반응기에 반응열을 공급하도록 하였다. 이와 함께 촉매 연소기를 이용한 연료 증발열 공급 장치 개발하여 개질기 공급 연료의 90% 이상이 기화되도록 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.250-254
• /
• 2003

A film bulk acoustic resonator (FBAR) device for 2 GHz radio frequency (RF) bandpass filter application is presented. This FBAR device consists of an aluminum nitride (AlN) film sandwiched between top(Al) and bottom(Au) electrodes and an acoustic multilayer reflector of a silicon dioxide/tungsten (SiO2/W). The A/N film deposited using a RF sputtering was observed to have small columnar grains with a strongly preferred orientation towards c axis. In addition to a high quality factor (4300), a large return loss of 37.19 dB was obtained.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.9
• /
• pp.671-680
• /
• 2020

This paper describes an improved beam analysis for compound rotorcraft fuselage design. The present beam approach is capable of analyzing fuselage composed of stiffeners using equivalent layer methodology. Thickness of the skin and laminated layer approach are suggested based on the unified beam formulation. The analysis which considers an equivalent stiffener layer is performed for a fuselage with stiffeners and preliminary study about the specification of stiffeners is conducted and compared by the results using the existing software.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.563-568
• /
• 2003

In this paper, a miniaturized parallel coupled bandpass filter using multi-layered LTCC(Low Temperature Co-fired Ceramics) substrate for SOP(System-On-Package) is proposed for applications to wireless communication systems. The fabricated BPF is composed of five 106${\mu}{\textrm}{m}$ thick LTCC layers and its size is 5.24mm x 4.3mm x 0.53 mm. The measured characteristics of the BPF show the center frequency of 5.8GHz, bandwidth of 200MHz, insertion loss of 2.326dB and return loss of 13.679dB. In addition, the attenuation is 28.052dB at 4.7GHz.