• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.471-471
• /
• 2012

도시유역에서 주로 침수피해가 발생하는 방류토구 인근의 저지대의 경우 유수지 및 빗물펌프장을 통하여 피해 발생을 방지할 수 있는 반면, 도심지 한복판에 이러한 상습 침수지역이 존재한다면 이에 대한 침수 방지 시설물의 설치에는 한계가 있다. 이러한 도심지 한복판의 침수위험지역의 경우 부지 확보의 어려움으로 인하여 유수지의 설치는 매우 제한적이며, 따라서 근래 대두되고 있는 것이 지하 저류공간의 건설 등이다. 그러나 본 연구에서는 이러한 지하 저류공간의 건설과 더불어 우수관망의 설계 자체를 침수피해 저감 측면에서 그 효과를 최대화하고자 하였다. 본 연구에서는 동일한 설계빈도하에 설계된 우수관망이라 하더라도 관망의 노선 선정에 따라서 초과강우사상에 따른 침수 발생량이 달라질 수 있다는 점에 주목하였다. 즉, 우수관망의 전체적인 구성에 있어서 설계빈도를 초과하는 강우사상에 대하여 그 부하량을 적정히 분배함으로써 관망의 전체적인 침수 발생 위험을 전반적으로 줄이는 것이다. 이를 통하여 확보되는 안전성은 지하 저류공간 등 각종 침수피해 저감 시설과 더불어 우수관망시스템의 침수피해 발생 위험을 전반적으로 줄일 수 있을 것이다. 본 연구에서는 이러한 목적하에 도시유역에서의 침수위험도 분석을 실시하였으며, 선행 연구를 통하여 제안된 우수관망의 신뢰도 산정 식을 토대로 목적함수를 아래의 식과 같이 구성하였다. $$Max.\;liability\;of\;Sewer\;Networks=1-\;{(1-N)^2+(1-V_i)^2\atop2}\;\cdots\cdots\cdots\;\;\;(1)$$ 여기서, $V_i$는 적용된 강우량당 유역의 전체 유출량 대비 월류발생량을 나타내며, $N_i$는 적용된 강우량당 해당 관망의 전체 지점 수 대비 월류 발생지점 수를 나타낸다. 이를 통하여 우수관망의 신뢰도를 최대화할 수 있는 최적설계 알고리즘을 개발하였으며, 실제 도시유역에 대한 적용을 통하여 최적 설계에 따른 신뢰도 향상 정도를 정량화하였다.

• Journal of Internet Computing and Services
• /
• v.11 no.1
• /
• pp.49-57
• /
• 2010

Today, internet traffic is rapidly increasing by the appearance of a large number of website thru a numerous internet service provider and the introduction of advanced teaching methods like utilizing ICT(Information and Communication Technology) education. At these actualities, it is requested to increase internet bandwidth in the scene of school; however, it is difficult to resolve the request quickly because of the government's budget and technical problems. In this circumstance, this paper proposes a method to raise the efficiency of internet operations with the current bandwidth. In order to achieve the purpose of this paper, the analysis of internet traffic has been done by the traffic currently being used in school, and an internet bandwidth distribution model differ from the existing standpoint is developed with the analyzed result. It can be used to predict the increase in the bandwidth which may be requested at school in the future, and it can support the office of education for appropriate bandwidth allocation at schools and reduction of school budget in telecommunication. Also, it can be adopted as a future oriented reference model for network policy.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.21-35
• /
• 2022

With the support of local and central governments, various incentive policies for "green" cars have been established, and the number of electric vehicle users has been rapidly increasing in recent years. As a result, much attention is being given to establishing a user-centered charging infrastructure. A standard for the number of electric vehicle chargers to be supplied is being prepared based on building characteristics, but there is quite limited research on the appropriate ratio of slow and fast chargers based on the characteristics of each place. Therefore, this study derived an appropriate penetration ratio based on data about the distribution ratio of common slow chargers. These data were collected using a survey of actual electric vehicle users. Next, an analysis was done on how to categorize the needs of charging environments and to determine what criteria or characteristics to use for categorization. Based on the results of the survey analysis, three types of places were derived. Type-1 places require 10% of chargers to be slow chargers, Type-2 places require 40-60% of chargers to be slow chargers (i.e., around equal distribution of slow and fast chargers), and Type-3 places require more than 80% of chargers to be slow chargers. The required levels of slow chargers were classified by place type and by individual using latent class cluster analysis, which made it possible to categorize them into five clusters related to socioeconomic variables, vehicle characteristics, traffic, and charging behaviors. It was found that there was a high correlation between charging behavior, weekend travel behavior, gender, and income. The results and insights from this study could be used to establish charging infrastructure policies in the future and to prepare standards for supplying charging infrastructure according to changes in the electric vehicle market.

• Journal of Aquaculture
• /
• v.11 no.2
• /
• pp.213-221
• /
• 1998

The effects of differen concentrations of Obosan as a feed additive dietary herb were examined on survival rate, growth, feed conversion ration and condition factor in olive flounder (paralichthys olivaceus). Effectiveness of dietary Obosan with optimized concentration for 48 weeks were also observed with regard to growth performances and yields. All groups fed diets containing 0.15, 0.3 and 0.6% of Obosan revealed significantly higher survival rate than control group (P<0.05). Growth, feed conversion ratio and condition factor of olive flounder fed diets containing Obosan were considerably improved when compared to those of controls (P<0.05). The 0.3% of dietary Obosan was proven to be the optimal concentration in all parameters tested. The dietary Obosan (0.3%) for 48 weeks showed significantly higher surval rate than control (P<0.05), and also improved yields in weight gain (19.0% improvement), specific growth rate (4.8%), feed conversion ratio(13.6%) and condition factor (10.8%), significantly (P<0.05).

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.944-951
• /
• 2011

An improved cholesterol analysis method was developed for powdered infant formula by gas chromatographic separation after liquid-liquid extraction and partition. In the official Korea Food Standard method for cholesterol analysis, the water phase and solvent phase were not well separated in the case of emulsified foods such as powdered infant formulas and baby foods. For the rapid and simple sample preparation method, an optimized direct saponification condition was established for heating temperature, heating time, and KOH concentration. From the results, the optimum conditions were as follows: heating temperature $90^{\circ}C$, heating time 60 min, and 16 M KOH 10 mL for a 2 g infant formula sample; improved separation condition for gas chromatography was as follows: the initial oven condition was $250^{\circ}C$ for 25 min, the oven temperature was increased to $290^{\circ}C$ by $10^{\circ}C$/min ratio, and finally the oven temperature remained at $290^{\circ}C$for 9 min. The developed method could be implemented for the study of cholesterol, providing the advantages of reduced inspection time and cost in emulsified foods such as infant formula.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.167-167
• /
• 2017

스마트팜 내부의 3차원 공간의 온도, 습도, 기압, 공기질 분석을 통한 돈사 미세 조절 기술에 대한 연구가 진행 중이다. 해당 특성 중에서 기압을 제외한 환경인자들은 돈사 내의 구조 특성상 위치별로, 시간별로 매우 상이한 변이의 형태를 보인다. 일정 시점을 기준으로 계측 지점 이외의 지점에 대한 환경인자들을 공간적으로 추정하는 기술은 대표적으로 컴퓨터 분석 기술에 의존하고 있다. 시간 복잡도가 매우 높은 CFD(Computer Fluid Dynamics) 방식은 정밀도 측면에서 유리하나, 상응하는 제어 기술/하드웨어 등의 부재로 모델링 결과의 활용도가 낮다고 볼 수 있다. 본 연구에서는 CFD를 수행하는 과정에 있어 실질적으로 유효한 단위로 공간 분해능을 낮추고, 동등한 크기의 세부 공간에 대한 모델링을 병렬적으로 수행하기 위한 방안을 연구하였다. 실험적으로 돈사 환경을 3차원으로 구성하기 위하여, 공기 흡입구, 배출구, 기둥, 덕트 요소를 포함시켰다. 실내 공간을 1차적으로 가로, 세로, 높이방향으로 $3{\times}3{\times}3$ 균등 분배한 후 3차원 행렬로 분할하였다. 각 분할된 행렬에 대한 연산 수행을 위하여 현재까지 대중에 공개된 SBC(Single Board Computer) 중 가장 높은 연산 수행 능력이 있는 Odroid-XU4(Hardkernel, AnYang, Korea) 16식을 병렬 클러스터링 기술로 연동하였다. 하나의 AP당 8개의 코어가 내장되어 있으므로, 총 128개의 코어를 이용하여 동시에 128개의 3D 정방행렬 연산이 가능하도록 구성하였다. 모델링을 위한 수학적 모델로는 실험적으로 Steady turbulent model (Newtonian coefficient)을 이용하였다. 클러스터링을 이용한 병렬 처리의 특성상 균등한 정보량을 동시에 배분해야 하므로 108 ($27{\times}4$)개의 코어를 이용하여 1차적으로 나뉜 공간을 다시 4등분하여 동시에 $12{\times}12{\times}12$에 해당하는 공간 분해능에 대한 처리를 동시에 수행할 수 있도록 하였다. 2단계에 걸쳐 분할한 공간 세그먼트에 대한 클러스터링 연산 수행 결과 초당 15회 정도의 연산을 수행할 수 있었으며, 시간 분해능을 100으로 설정한 경우 약 5초가 수행되었다. 선행적으로 수행하였던 CFD 모델링 (OpenFOAM)과 비교하였을 때 상대적으로 정밀도가 낮은 3차원 모델링 결과를 얻을 수 있었다. 모델링에 소요되는 시간을 비약적으로 경감 시킨 장점을 살려 적정한 공간 분할 기법과 추가로 발생하는 다수의 바운더리 조건을 근사적으로 추정할 수 있는 데이터 마이닝 기술이 보완되어야 할 것이다.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.373-380
• /
• 2018

The purpose of this study was to identify the importance and performance ranking and differences in inflight meal service quality. Data were collected from A airlines passengers. In order to secure the validity and reliability of the measurement tools, exploratory factor analysis were conducted, accordingly meal, service, cleanliness were deduced. IPA results are as follows. First, the quadrant I consisted of meal flavor, meal quality, meal menu, balanced diet, korean food availability, cleanliness of dishes, cleanliness of crew clothes. In the II quadrant, appropriate temperature, appropriateness of meal distribute time, cleanliness of the meal were found. So, the airline managers should have the most interest in these attributes and had to improve first. The quadrant III showed meal quantity, liquor diversity, polite attitude, immediate response to the meal, knowledge of the meal, meal freshness. Lastly, the quadrant IV showed a variety of beverage and special meal order. It is considered that resource allocation is necessary for minimizing the amount of resources invested to the quadrant IV, and then it should be allocated the quadrant II, which is high in importance but low in performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.433-442
• /
• 2017

This study consists of five case studies of the catering facilities of newly-built elementary schools' in Sejong City, regarding the spatial configuration and allocation. The analysis indicated that the space allocated in the cooking area in the five schools compared to the standard was as follows: School A; 99.2%, B; 91.1%, C; 81.4%, D; 110.8%, E; 88.1%. Accordingly, the cooking area was close to, or slightly above the standard; nevertheless, other areas in the facilities were not allocated sufficient space and were not appropriately planned. Among the other findings, the receiving areas of three schools were not even planned, and the receiving works were carried out in the pre-preparation area. Considering the flow of the dish-washing process, the width of the room should be at least 3.6 meters with a passage width of 1.6 meters, and easy access to the cooking and dining areas must be equipped. An interview with all five supervisors showed that most complaints focused on the cooking and dishwashing areas, whereas there were none in the storage and workers' area. The result highlights the importance of the cooking and dishwashing areas as the main functions in catering facilities, and future planning strategies should consider this aspect.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.307-314
• /
• 2003

In the general multiple video object coder, more interested objects such as speaker or moving object is consistently coded with higher priority. Since the priority of each object may not be fixed in the whole sequence and be variable on frame basis, it must be adjusted in a frame. In this paper, we analyze the independent rate control algorithm and global algorithm that the QP value is controled by the static parameters, object importance or priority, target PSNR, weighted distortion. The priority among static parameters is analyzed and adjusted into dynamic parameters according to the visual interests or importance obtained by camera interface. Target PSNR and weighted distortion are proportionally derived by using magnitude, motion, and distortion. We apply those parameters for the weighted distortion control and the priority-based control resulting in the efficient bit-rate distribution. As results of this paper, we achieved that fewer bits are allocated for video objects which has less importance and more bits for those which has higher visual importance. The duration of stability in the visual quality is reduced to less than 15 frames of the coded sequence. In the aspect of PSNR, the proposed scheme shows higher quality of more than 2d13 against the conventional schemes. Thus the coding scheme interfaced to human- eye proves an efficient video coder dealing with the multiple number of video objects.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.4
• /
• pp.201-210
• /
• 2007

Pollution by chemical substances such as POPs, EDCs and PBTs in the ecosystem has become more complex and varied, increasing the possibility of irreversible damage to human health or the ecosystem. It is necessary to have a exposure assessment in a multi-media environment for various chemical substances is required for efficient management. This study applied MUSEM(Multi-media Simplebox-systems Environmental Model), a multimedia environmental model that can simultaneously evaluate the possibility of exposure of hundreds of chemical substances in order to efficiently manage chemical substances that can have negative impact on human health or ecological environment through environmental contamination. MUSEM executed the modeling for Japan by setting all 47 prefectures of japan as the regional area for 62 chemical substances and the rest of the territory of japan, excluding regional area, as the continental area and made the estimation of concentration among environment media in each administrative area and made the sensitivity analysis on Tokyo area. The results of simulation for chemical distribution showed that most of the target chemicals located in water region. The result of sensitivity analysis for octanol-water partition rate showed that the concentration change of soil in urban/industrial area and sediment in freshwater was high. In the case of sensitivity analysis for degradation rate showed that the concentration change of freshwater, soil in urban/industrial area, and sediment in freshwater was high.