• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.10
• /
• pp.1108-1120
• /
• 1990

The present study is to develop an intelligent control system for flexible manufacturing system, which is suitable for a variety of manufacturing types with smaller production rates. The controller is designed to integrate heuristic rules with optimization techniques for loading as well as flow rate of parts and ultimately meeting performance indices. The control function implemented by an optimization technique is to calculate short term production rates of parts. The heuristic control determined by production rules requires knowledge base to evaluate selected loading alternatives according to short term production rate and current process information, and also to determine final decision pertaining to loading. In this case, the knowledge base is constructed using the rules for evaluating alternatives, decision criteria, and flow control of parts in manufacturing system. The database is formulated by means of managing and updating current process information. A graphic system to monitor current status of the function and operation of manufacturing system is developed, and computer simulation is carried out to evaluate the performance of the proposed controller.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.3
• /
• pp.391-406
• /
• 2002

In order to realize a practical VOD system, it is necessary for a high-capacity and cost-effective hierarchical VOD server based on tertiary storages such as DVD jukebox. In such a system, it is possible to transfer multiple streams to users by alternatively swapping DVDs using the fixed number of drives. But it takes a long time for loading DVD to a drive. In this paper, we propose a primitive pipelined loading mechanism for hiding the loading time to swap DVDs in a hierarchical VOD server based on DVD jukebox. We also propose a enhanced pipelined loading mechanism for increasing the maximum admittable streams with the fixed number of drives. The enhanced mechanism caches the initial segment of each stream on a disk storage allowing faster data transfer. The performance analysis shows that the proposed mechanisms can admit the maximum allowed stream capacity under the fixed number of disk drives.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.444-449
• /
• 2020

In this study, On-Board Truck Scale was installed on the construction waste collection / transportation vehicles to monitor the weight of the waste at all stages from generation to final treatment. It was performed as a case study of a construction waste control technology that can efficiently manage the total generating and recycling amount using real-time weight/location information obtained by the On-Board Truck Scale device. As a result of the study, it was confirmed that the total amount of construction waste can be monitored in real time, and a plan for efficient logistics transportation can be derived through the analysis of operation patterns by managing the real-time transport volume, transport distance, and transport time of the construction waste collection / transportation vehicles. It was confirmed that overloading can be prevented in advance by controlling the loading also.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.589-591
• /
• 2021

In the offshore plant industry, the Access service basket for aerial work is used of for various business purposes. However, various types of safety accidents continue to occur in operating these system. In the case of high-capacity workstations currently in use, workers are exposed to various risks in determining and operating the load capacity, proximity distance, and direction of operation. In this paper, to solve this problem, we develop a device that incorporates IoT-based monitoring and crash alarm systems into aerial work systems. The developed device was tested in the presence of experts to ensure reliability of the device, which allows workers and managers to easily check the operation status and thereby prevent safety accidents in advance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.665-675
• /
• 2008

The objective of this paper is to provide an approximate cost estimating model for tunnel that can be utilized both in quick construction cost estimating for design alternatives, and in evaluating efficiently the cost effects according to the environmental changes during design and construction stage. To meet this requirement, this study analyzes critical cost factors influencing tunnel construction costs. The cost factors include 7 elements such as rock drilling method, advancing method, type of detonator, loader capacity, unit weight and soil volume change factor, length of tunnel. This paper investigates the cost variance according to the change of the cost factors. The result is expected to be used in formulating approximate tunnel cost estimating model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.262-267
• /
• 2017

The number of shops needed for the fabrication of a sphere type cargo tank for an LNG carrier is proportional to the size of the tank to be constructed. Due to the limitations of facility investment, it is difficult to fabricate various size tanks with a perfectly spherical shape in the (factory). An efficient method of increasing the capacity of the cargo tank is to extend the conventional sphere type LNG tank vertically by inserting a cylindrical shell structure. In this study, equations for the dynamic pressure distribution due to horizontal acceleration are derived for a sphere type LNG tank with central extension. The derived equations can be easily applied to the design and structural assessment of a sphere type LNG tank with central extension. Furthermore, the results of this study can be combined with the static design loads previously reported by Shin & Ko [9], in order to establish a simplified analysis method which enables a precise initial estimate to be obtained, thereby obviating the need for a time consuming finite element analysis.

• Journal of Korean Society of Transportation
• /
• v.15 no.3
• /
• pp.75-92
• /
• 1997

추월가능성을 판단하기 위해서 앞을 바라볼 수 있어야 하는 거리를 추월시거라 한다. 적절한 추원시거의 확보는 2차선 도로의 효율성과 운전자의 안전성 제고 및 도로설계시 매우 중요하다. 이러한 목적을 위하여 추월시거를 산정할 수 있는 여러 모형이 개발되었으나, 실제 교통상황을 반영하기에 많은 문제점을 안고 있음이 지적되고 있다. 따라서 본 논문은 기존 모형들의 이론적 배경을 고찰하고, 각 모형의 단점과 한계를 파악하여, 운전자의 실제 추월형태를 고려한 새로운 추월시거산정모형을 개발하는데 주안점을 두고 있다. 본 논문에서 개발한 PASS모형은 현재 미국에서 도로설계시 기준으로 사용되고 있는 AASHTO모형을 보완하여 구축하였다. 기존의 모형들은 서로 다른 조건을 가정하여 개발되었기 때문에 각 모형들의 추월시거 산정값을 비교분석하는데 어려움이 있다. 하지만 PASS모형은 운전자의 반응시간, 차량의 길이, 차량의 가속능력 등 실제 추월시거 산정시 반드시 고려해야 할 중요한 요소들을 특성치로 반영할 수 있게 함으로써 다양한 추월 상황과 현실적인 교통상황을 폭넓게 수용할 수 있는 장점을 갖고 있다. 본 논문에서는 새로 개발한 P SS모형을 이용하여 얻은 결과와 기존의 AASHTO모형, MUTCD모형, Glennon모형을 통해 얻은 결과를 비교하였으며, PASS모형에 우리나라 현실에 적합한 특성치를 적용하여 2차로 도로의 추월시거를 산정하였다. 이 결과 현재 우리나라 도로용량편람에서 제시하고 있는 추월기능구간 기준인 450m가 설계속도가 낮은 일반국도에는 타당함을 확인할수 있었다. 그러나, 설계속도가 높은 화물타의 운행빈도가 높은 고속국도의 경우, 재검토가 필요할 것으로 판단된다.기존의 광유계 윤활제에 비하여 대단히 고가하는 문제점을 갖고 있다. 그러나 윤활 마찰면의 다양화와 가혹한 사용조건은 자성유체 윤활제의 연구개발 필요성을 크게 증대시키고 있다.xed Effects Model)을 결정하고, 각각에 해당하는 통계모형을 구축하였다. 이 결과 (1) 업종 및 기업규모별로 그룹간에 유의한 특성이 발견되었으며, (2) R&D 및 광고투자는 기업의 시장성과를 설명하는 중요한 변수이나, (3) R&D 투자의 경우는 광고에 비해 불확실성이 존재하는 것으로 나타났고, (4) 수리모형에서 도출된 한계원리가 통계모형에서도 유효한 것으로 드러났다.등을 토대로 한 10대 산업을 육성하기 위하여 과학기술부는 기술수요조사를 바탕으로 49개 주요기술을 도출하여, 과학기술 일류 국가 실현, 국민소득 2만불 달성이라는 국가적 슬로건을 내걸고 “차세대 성장동력” 창출을 위한 범정부차원의 기획과 연구비의 집중투자를 추진하고 있다.달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.32-38
• /
• 2020

This study examined the problems of existing vehicles to propose alternatives to improve the crashworthiness of railway freight cars through collision acceleration analysis using a one-dimensional collision analysis method. A collision scenario of railway shunting and crash accidents was selected from the collision accident cases and international standards. A one-dimensional collision simulation using LS-DYNA was performed according to those scenarios. As a result, the acceleration level of the freight wagon was calculated to be under 2g and was predicted to meet the EN 12663 standard in the shunting situation. On the other hand, the result of crash simulation with an impact velocity between 10 and 15 km/h revealed the shock absorber capacity of the railway coupler to be insufficient in a crash situation, resulting in increased acceleration, and carbody deformation could be predicted. As a method of improving the crashworthiness, a deformation tube-type energy absorber was applied to the coupler system, and collision analysis was performed again with new energy absorption strategy. Overall, the simulation showed that the acceleration level was decreased by 12% of the conventional freight-car energy absorption system.

• The Journal of Bigdata
• /
• v.5 no.1
• /
• pp.155-180
• /
• 2020

It takes the most important role the problem of assigining vehicles and desigining optimal routes for each vehicle in order to enhance the logistics service level. While solving the problem, various cost factors such as number of vehicles, the capacity of vehicles, total travelling distance, should be considered at the same time. Although most of logistics service providers introduced the Transportation Management System (TMS), the system has the limitation which can not consider the practical constraints. In order to make the solution of TMS applicable, it is required experts revised the solution of TMS based on their own experience and intuition. In this research, different from previous research which have focused on minimizing the total cost, it has been proposed the methodology which can enhance the efficiency and fairness of asset utilization, simultaneously. First of all, it has been adopted the Cluster-First Route-Second (CFRS) approach. Based on the location of customers, we have grouped customers as clusters by using four different clustering algorithm such as K-Means, K-Medoids, DBSCAN, Model-based clustering and a procedural approach, Fisher & Jaikumar algorithm. After getting the result of clustering, it has been developed the optiamal vehicle routes within clusters. Based on the result of numerical experiments, it can be said that the propsed approach based on CFRS may guarantee the better performance in terms of total travelling time and distance. At the same time, the variance of travelling distance and number of visiting customers among vehicles, it can be concluded that the proposed approach can guarantee the better performance of assigning tasks in terms of fairness.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.71-76
• /
• 2023

Recently, in order to store and manage big data, research and development of a high-performance storage system capable of stably accessing large data have been actively conducted. In particular, storage systems in data centers and enterprise environments use large amounts of SSD (solid state disk) to manage large amounts of data. In general, SSD uses FTL(flash transfer layer) to hide the characteristics of NAND flash memory, which is a medium, and to efficiently manage data. However, FTL's algorithm has a limitation in using DRAM more to manage the location information of NAND where data is stored as the capacity of SSD increases. Therefore, this paper introduces FTL policies that apply virtual memory to reduce DRAM resources used in FTL. The virtual memory-based FTL policy proposed in this paper manages the map data by using LRU (least recently used) policy to load the mapping information of the recently used data into the DRAM space and store the previously used information in NAND. Finally, through experiments, performance and resource usage consumed during data write processing of virtual memory-based FTL and general FTL are measured and analyzed.