• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.6
• /
• pp.537-543
• /
• 2016

A new approach to systematically model aerodynamic coefficients using an adaptive sampling based wind tunnel testing considering cost is proposed. The Latin Hypercube design is used for selecting initial test points. The Gaussian Process (GP) is iteratively used during the experiment to determine additional experimental points that minimizes the uncertainty reduction per incremental cost. A numerical simulation based experiment was conducted using the static aerodynamic coefficient database a fighter aircraft, which demonstrated the validity of the proposed method.

• The Korean Journal of Applied Statistics
• /
• v.26 no.4
• /
• pp.581-594
• /
• 2013

A group sequential design can end a clinical trial early if a confirmed efficacy or a futility of study medication is found during clinical trials. Adaptation can adjust the design of clinical trials based on accumulated data. The key to this methodology is considered to control the overall type 1 error rate while maintaining the integrity of clinical trials. The estimation would be more complex and the sample size calculation will be more difficult if the clinical trials have repeated measurement data. Lee et al. (2002) suggested a repeated observation case by using the independent increments properties of the interim test statistics and investigated the properties of the proposed confidence interval based on the stage-wise ordering. This study extend Lee et al. (2002) to adaptive group sequential design. We suggest test statistics for the adaptation as redesigning the second stage of clinical trials and induce the stage-wise confidence interval of parameter of interests. The simulation will help to confirm the suggested method.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.146-150
• /
• 2009

구조 시스템 식별은 역문제로서 이상화된 유한요소 모델을 실험치와 일치시키기 위해 유한요소모델을 보정하는 형태로 주로 이루어진다. 이를 위해 비선형 섭동법이 사용되고 있으며 이 방법을 실제 문제에 사용하기 위해서 시스템 축소법에 대한 연구가 진행 되고 있다. 하지만 기존의 방법에서는 유한요소모델의 모든 요소가 실험치와 다르다고 가정하여서 전체 요소 수만큼의 설계 변수를 두어서 역해석을 수행한다. 이런 기존의 방법에서는 시스템이 커짐에 따라 연산 시간이 기하급수적으로 증가하게 되어 어려움이 있다. 설계 변수의 증가는 해공간(solution space)의 확장을 의미하며 이는 해의 정확성에 큰 영향을 끼친다. 본 연구에서는 모델을 적은 수의 설계영역으로 나누어서 반복연산 단계마다 해의 경향성을 이용해서 설계 영역을 전략적으로 변경하는 적응성 설계영역기법을 제안한다. 수치예제를 통해 본 연구에서 제안하는 기법의 정확도와 효용성을 고찰한다.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1815-1816
• /
• 2006

소음은 환경 오염원의 하나로서 사람에게 육체적, 정신적 피해를 발생시킨다. 이에 소음 제어 기술의 필요성이 증대하였고, 그 중에서 제어가 까다롭고 고비용을 요구하는 저주파 소음 제어 기술의 개발이 확대되고 있다. 따라서 본 연구에서는 저주파의 주기적인 특성을 가지는 1차원 평면파 소음에 대한 능동 제어를 위해 기존의 적응 피드포워드 방법의 단점을 보완하는 적응 피드백 방법을 이용한 능동 소음 제어 시스템을 구성하고 능동 소음 제어 실험을 수행하였다. 이를 위해 소음원과 제어 음원을 가지는 덕트 형상의 실험 장치를 구성하였다. 제어기 설계를 위해 전파 소음을 예측하는 선형 예측법을 적용한 적응 디지털 필터를 구성하였으며 적응 알고리즘으로 Filtered-X LMS 알고리즘을 이용하였다. 제어기는 제어 알고리즘을 프로그램화하여 DSP에 입력함으로써 구성하였다. 실험에 사용된 소음은 500[Hz] 이하의 단일 주파수의 정현파 소음을 사용하였으며, 실험결과 음압 감소의 효과를 볼 수 있었다. 능동 소음 제어의 기술을 개발하여 하드웨어(덕트)의 모양 및 구조, 제어기의 종류 및 처리 속도, 주파수나 크기와 같은 특성이 급격히 변하는 소음의 경우에 능동적으로 소음을 제어할 수 있으며, 저주파 소음을 발생시키는 관형 연소기와 같은 장치 및 여러 분야에 응용이 가능하도록 하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.817-823
• /
• 2017

In the past, research has been conducted on the development of an adaptive cruise control algorithm considering fuel efficiency, and an adaptive cruise control system considering fuel efficiency have been developed. However, research on optimizing vehicle and adaptive cruise control parameters in order to maximize performances is insufficient. In this study, the design optimization of vehicle and control parameters considering fuel efficiency, trackability, ride comfort and safe distance is performed. This paper proposes performance measures of vehicle behavior and develops an adaptive cruise control system. In addition, based on the screening of vehicle parameters that significantly influence performances, kriging surrogate models are constructed through a sequential design of experiment, and kriging surrogate model-based design optimization is performed to maximize fuel efficiency and satisfy target performances.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.315-324
• /
• 2017

The smart grid with distributed power supply introduces a number of problems including not only the problems of the existing power grid but also the problem of protection co-operation due to new electric phenomenon because it has a mixed operation structure combining the existing radial operation structure and the new loop operation structure. The EMTP based power system analysis method has flexibility and convenience from the view of system configuration but it requires another experimental verification because of uncertainty of design and analysis results. On the other hand, the real demonstration system has difficulties in observing accurate fault on large scale system due to considerable economical and spatial construction cost, system configuration constraint, and it is difficult to demonstrate the distributed, autonomous and adaptive control strategy of smart grid. In this paper, a basic theory for a micro smart grid simulator design using MEMS(Micro Electro-Mechanical Systems) miniaturization technology is studied which can safely and freely experiment and observe electrical phenomena, and distribution, autonomous adaptive control strategy for disturbances on 22.9kV smart grid under minimum economic and spatial cost.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.153-163
• /
• 1999

본 연구에서는 격자패널을 통한 소음전달을 감소시키기 위하여 외부 구조적 가진으로부터 유발된 경량 패널의 진동을 능동 제어하는 기법을 기술한다. 최적 되먹임제어기와 적응 앞먹임제어기가 결합된 혼합형 제어기가 진동제어기로 사용된다. 되먹임제어기는 주파수 영역의 모델규명법에 의해 추출된 다중 입/출력 패널진동계 모델에 대하여 LQG 최적기법을 이용하여 감쇠능을 향상시키도록 설계된다. 앞먹임제어기는 되먹임 궤환의 결합효과를 자동적으로 보정할 수 있는 제안된 학습법칙에 기초하여 패널의 잔류진동이 최소가 되도록 적응된다. 45.7${\times}$45.7${\times}$2.54 ${cm^3}$ 벌집형상의 고강도 패널, 4개의 관성형 구동기 및 이산신호처리장치에 의해 구현된 패널 진동계에 대한 능동제어 실험을 수행해 본 결과 600Hz 주파수대역에 대한 12dB 진동저감이 이루어 질 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.88-94
• /
• 2009

This paper proposes real time object detection and tracking algorithm that can be applied to security and supervisory system field. A proposed system is devide into object detection phase and object tracking phase. In object detection, we suggest Adaptive background subtraction method and Adaptive block based model which are advanced motion detecting methods to detect exact object motions. In object tracking, we design a multiple vehicle tracking system based on Kalman filtering. As a result of experiment, motion of moving object can be estimated. the result of tracking multipul object was not lost and object was tracked correctly. Also, we obtained improved result from long range detection and tracking.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.5-14
• /
• 2001

This paper describes a simplified design method of stabilizing piles based on an experimental tests and an analytical study which can take into account the safety factor of slope and pile spacing. The nonlinear characteristics of the soil-pile interaction for stabilizing piles are modeled by using load transfer method. The interaction factors due to pile spacing and cap rigidity were estimated by using a three dimensional nonlinear finite element approach and laboratory tests. Based on the results obtained, the interaction factors are proposed quantitatively for one-row pile groups with spacing-to-diameter ratios varying far 2.5 to 7.0. The Bishop's simplified method of slope stability analysis is extended to incorporate the soil-pile interaction and determine the safety factor of the reinforced slope. Through the comparative study, it is found that the prediction by present approach is in relatively good agreement with the results of centrifuge tests and field tests and three dimensional finite element analyses.

• The Journal of Korean Academy of Sensory Integration
• /
• v.9 no.1
• /
• pp.33-44
• /
• 2011

Objective : Sensory integration is the organization for sensation for use. The purpose of this study is to carry out the sensory integrative intervention for the mental retardation with child and to examine change of child's balance and breath abilities. Methods : The study performed from 25 May to 13 Autumn, 2009. The design is AB design(baseline 3sessions, intervention 21sessions) of single-subject research design. We carried out the sensory integrative intervention(3 sessions per week) for baseline period and the sensory integrative intervention(3 sessions per week) with sensory diet every day for intervention period. Results : The results of the sensory integrative intervention with sensory diet had positive effects for child's breathe and balance. Conclusion : The occupational therapists recognize the effects of the sensory integrative intervention with sensory diet and need to recommend for the family of child with disability.