• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.423-429
• /
• 2007

Since the wireless smart card has played a main role in the identification security application for the building access; this research has its purpose to improve the performance of the smart card system and aims to offer more convenient to user. The contactless cards do not require insertion into a card reader and can work up to centimeters away from the reading device. To be able to cope with this performance the controlling of power consumption through the adaptive modulation and error control is needed. This paper addresses a forward error control (FEC) scheme with the adaptive Reed-Solomon code rate and an M-ary frequency shift keying (M-FSK) modulation scheme with the varying symbol size M over the link. The result of comparing energy efficiencies of adaptive error correction and adaptive modulation to other various static schemes shows to save over 50% of the energy consumption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.621-629
• /
• 2001

In this thesis a wireless data transmission system has been proposed and analysed that uses the multi-carrier technique with the adaptive modulation scheme. In general, the OFDM(Orthogonal Frequency Division Multiplexing) system is assigning a same amount of information to all sub-carriers in a wireless data transmission. In the proposed system, the different amount of information is assigned to each sub-carrier depending on the state of channel and the target probability of error of system. With the proposed scheme, the transmission rate can be maximized with the fixed power and the required power to transmit the information can be minimized with the target probability of error of system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6B
• /
• pp.717-726
• /
• 2001

감쇄를 겪는 무선 채널 환경에서 전력과 대역폭을 효율적으로 조절하여 데이터를 전송하는 적응 부호 변조 방식에 적합한 제어 기법을 제안한다. 먼저 부호화 시스템에 맞도록 평균 대역폭 효율을 다시 정의하였고, 이것에 기초하여 전력 및 대역폭 효율을 최대화하도록 변조 레벨 구간을 얻었다. 이 제어 기법은 부호 이득을 최대로 이용할 수 있고, 변조 형태에 관계없이 대역폭 효율을 최대화 할 수 있다. 모의 실험 결과 제안한 방식은 요구된 비트 오율 성능을 만족하면서 기존의 방식보다 전력 할당을 효과적으로 하기 때문에 대역폭 효율이 향상되었다. 본 논문에서 제안한 제어 기법은 감쇄 특성을 가진 무선 채널에서 고속 데이터 전송에 사용될 수 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.220-221
• /
• 2011

방송 및 통신망에서 방송 및 멀티캐스트 데이터를 효율적으로 전송하기 위해 적응변조 방식을 통해 그룹 내의 사용자 개개인의 요구 성능(QoS)을 보장해주는 기술이 고려되고 있으며, 이를 위해서는 피드백 부담을 낮출 수 있는 기술 개발이 필수적이다. 본 논문에서는 멀티캐스트 그룹 내 모든 사용자가 공유하는 1bit 피드백 채널을 사용하여 그룹 내 사용자수에 관계없이 2개 또는 3개의 1bit 피드백채널만을 사용하여 적응변조(Adaptive Modulation and Coding)동작을 하는 방법을 제안하였다. 또한 제안한 방법에 대한 시스템 레벨 모의실험을 수행하여, 사용자별로 피드백 채널을 사용하는 경우와 제안된 방식을 사용하는 경우의 전송 효율을 비교분석 하여 제안된 방식의 실용성을 보였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.3
• /
• pp.18-27
• /
• 2000

Signal attenuation of Ka-band satellite communication system due to rain fading is more severe than those of conventional frequency band system, thus an efficient rain fade countermeasure technique is absolutely required. In this paper, we design an improved adaptive modulation system, which switches the modulation mode according to the channel condition, and propose the novel synchronization algorithms. We assume that the modulation scheme is M-ary PSK and the receiver is TDMA burst mode. And the transponder model is the same with KOREASAT-3. By using the adaptive modulation scheme, we satisfy the BER and mean spectral efficiency requirements, simultaneously, which is impossible by using the fixed modulation scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7C
• /
• pp.907-914
• /
• 2004

In this paper, we propose an application of the receiver antenna switching to an conventional adaptive modulation system and derived the optimal antenna switching threshold of the system to maximize the average transmission bit rate and analyzed its performance. Also, we compare the performances of the presented scheme with those of an adaptive modulation using the antenna selection diversity and the one with a single antenna in terms of the average number of bits per symbol and the probability of no transmission. Performance comparison results show that the proposed system has an SNR gain of 1.4 dB over the adaptive modulation using a single antenna when the average number of bits per a symbol is two and yields an SNR gain of 6 dB for maintaining the probability of no transmission at the level of 0.1.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.69-78
• /
• 2006

High spectral efficiency can be obtained by adaptive modulation in which the modulation scheme is changed according to the channel environment. Thus it is especially suitable to mobile channel which is a typical example of time-varying channel. It is required to determine the optimum thresholds of signal-to-noise ratio(SNR) to change the modulation scheme effectively according to mobile speeds. Thus the optimum thresholds for specific mobile speeds to get the required bit error rate(BER) of $10^{-6}$ are obtained with the powerful turbo code in this paper. In addition, the optimum thresholds for the continuous mobile speed are proposed by interpolation of the obtained results. And the error performance and average spectral efficiency are investigated at various mobile speeds and channel environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.3
• /
• pp.412-419
• /
• 2020

The strategic unit communication infrastructure for military command, communications requires a dualized network structure of various communication methods, considering the direction of development, strategic unit and line characteristic. It has been pointed out that MicroWave, which is typical of wireless systems, is inefficient because it operates only with existing technologies. Therefore, it is necessary to analyze the structure, efficiency of the MW transmission system and its effects. It is difficult to transfer efficiently considering wireless environment due to a fixed type of access structure in the existing MW transmission system. Adaptive modulation allows improvement, but with traditional access structures and fixed bandwidth, there is a limit. Following the transmission performance improvement technique considering availability and link distance in the previous study, this paper presented improved packetized MW transmission system structure and variable bandwidth transmission in consideration of adaptive modulation based variable transmission waveform, bandwidth and distance, and performed the analysis in view of the strategic unit and command control circuit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1934-1936
• /
• 2015

This paper proposes an optimal relay selection and adaptive throughput enhancement scheme utilizing superposition modulation in cooperative communication. The optimal relay is selected and the channel state is estimated by utilizing superposition modulation. The source determines the number of superimposed signal in accordance with the estated channel state. As a result, throughput is increased in accordance with the channel state.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.780-787
• /
• 2003

Adaptive modulation is the method to increase the throughput of the mobile system using the power margin of the system design. In this paper, we propose the method to change adaptive modulation parameters for the stable system operation by monitoring the mobility of the mobile station. The proposed method measures the instanteneous mobility of the mobile station monitoring the closed power control data. The MPSK modulation method is used for the basic modulation method because of the hardware implementation. Using the proposed method we can get the more powerful throughput. By the system simulation to verify the evaluation of the proposed algorithm, we can notice the algorithm is more efficient than the typical method