• Journal of the Korean Society of Food Culture
• /
• v.6 no.2
• /
• pp.215-222
• /
• 1991

The difference between Kimchi, Japanese pickles, Korean Salted and fermented fish intestines and Japanese Salted and fermented fish intestines was investigated by comparising composition of inorganic cation in them. A high-performance liqid chromatography was used for the determination of Na, K, Ca and Mg in Kimchi, Japanese pickles and Salted and fermented fish intestines. The Kimchi samples analyzed were produced in the home, in the restaurant, in the nunnery and by food manufactures in Korea, and the pickles used were produced by food manufactures in Japan, and Salted and fermented fish intestines used were produced by food manufactures in Korea or Japan. The results obtained were summarized as following: (1) Sodium chloride in Kimchi was $1.8{\pm}0.37%$, $2.8{\pm}0.60%$ in Asazuke, Japanese picles which the fresh vegitables was seasoned with sodium chloride and seasoning, $1.8{\pm}0.32%$ in Japanese Kimchi, Japanese pickles which the fresh vegitables was seasoned with the mixture of sodium chloride, garlic powder, red peper's powder and seasoning, $5.3{\pm}0.66%$ in Shoyu Zuke, Japanese pickles which the salted vegetables was seasoned with sodium chloride and seasoning after desalting. (2) Na/K value in Kimchi was $1.7{\pm}0.17$ and $4.6{\pm}1.44$ in Asazuke, $2.6{\pm}0.85$ in Japanese Kimchi and $27.3{\pm}6.79$ in Shoyu zuke respectively. (3) Kimchi contained more K and Ca than Japanese pickles. (4) Kimchi remarkably contained the Ca originating to salted and fermented fish intestines. As the results of this study, it was presumed that while Kimchi and Japanese pickles is well known as a food that contributed to high blood pressure, Kimchi and Japanese Kimchi might not cause the high blood pressure because they have an excellent balance of Na/K value and low Na content. And also it was considered that these differences might be caused by the difference of th food taste between and Korean and Japanese people.

• Journal of Chest Surgery
• /
• v.35 no.12
• /
• pp.862-870
• /
• 2002

The surgical results of the patients with single ventricle(SV) associated with total anomalous pulmonary venous connection(TAPVC) has been reported with high mortality and morbidity due to their morphologic and hemodynamic complexity. A retrospective review was undertaken to report the outcome of the first-stage palliative surgery in our institution and to determine the factors influencing early death. Material and Method: Between January 1987 and June 2002, 39 patients with SV and TAPVC underwent surgical intervention with or without TAPVC repair. Age at operation ranged from 1day to 10.7months (median age, 2.4month), and 29 patients were male. Preoperative diagnosis included 20 right-dominant SV, 15 SV with endocardial cushion defect, 3 left-dominant SV, and 1 tricuspid atresia. The pulmonary venous connection was supracardiac in 22, cardiac in 5, infracardiac in 11, and mixed in 1, Obstructed TAPVC was present in 11. First-stage palliative surgery was performed in 37. Repair of TAPVC, either alone or in association with other procedures, was performed during the initial operation in 31. Univariate and multivariate analyses were performed to analyze the risk factors influencing the operative death. Result: A mean follow-up period of survivors was 34.3 $\pm$ 43.0(0.53 ~ 146.2)months. Overall early operative mortality was 43.6%(17/39). The causes were low cardiac output in 8, failure of weaning from cardiopulmonary bypass in 3, sepsis in 2, pulmonary hypertensive crisis in 1, pulmonary edema in 1, pneumonia in 1, and postoperative arrhythmia in 1. Risk factors influencing early death in univariate analysis were body weight, surgical intervention in neonate, obstructive TAPVC, preoperative conditions including metabolic acidosis, and need for inotropic support, TAPVC repair in initial operation, operative time, and cardiopulmonary bypass(CPB) time. In multivariable analysis, body weight, age at initial operation, surgical intervention in neonate, preoperative conditions including metabolic acidosis, need for inotropic support and CPB time were the risk factors. Conclusion: In this study, we demonstrated that the patients with SV and TAPVC had high perioperative mortality. Preoperative poor condition, young age, the length of operative and CPB time, the presence of obstructive TAPVC had been proven to be the risk factors. This fact suggests that the avoidance of unnecessarily additional procedures may improve the surgical outcomes of the first-stage palliative surgery. However further observation and collection of the data is mandatory to determine the ideal surgical strategy.

• Journal of Nutrition and Health
• /
• v.48 no.1
• /
• pp.81-93
• /
• 2015

Purpose: The aim of this study was to estimate total sugar intake and sugar intake-related dietary habit and nutrient intake of elementary school students. Methods: Subjects included 701 elementary school students (351 boys and 350 girls) residing in Jeju. The research analyzed a sample and was carried out using the 24 hour recall method and one day consumption of total sugar. Results: The average daily total sugar intake was 55.3 g (male 53.1 g, female 57.6 g). Total sugar intake per meal was 6.3 g (11.4%) from breakfast, 6.9 g (12.5%) from lunch, and 7.2 g (13.0%) from dinner, 34.9 g (63.1%). Major food groups of total sugar were milks (17.04 g), grains and their products (12.79 g), fruits and their products (9.40 g), and sugars and sweets (7.30 g). In analysis of the amount of total sugar consumption from several recipes, much was taken in from dessert and snacks such as dairy products (15.08 g), bread and snacks (6.4 g), beverages (5.5 g), fruits (5.1 g), and ice cakes (4.8 g). Total sugar consumption was high for rices and side dishes such as noodles (5.1 g), stir-fried foods (2.3 g), fried foods (1.4 g), cooked rice with seasoning (1.4 g), and hard-boiled foods (1.1 g). In comparison of total sugar consumption for sugar sources, daily intake of natural sugar, added sugar, and natural and added sugar were 25.8 g, 23.3 g, and 6.2 g, respectively. High sugar intake group, which was over 20% of the energy from total sugar intakes, consumed significantly less Fe, Zn, and niacin than the low sugar intake group, which was below 20%. Conclusion: Total sugar intake of fifth graders of elementary schools on Jeju Island was 55.4 g/day, and it was usually intake from snacks. Therefore, elementary school students need nutritional education for proper selection of better snacks and for reduction of dietary sugar intake.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.148-156
• /
• 2009

Background: As cardiovascular operations become more complex and sophisticated, there is an increasing need for various bioprostheses for use as components of blood vessels and heart valves. We developed a fatigue stimuli test instrument to objectively evaluate the mechanical durability of a bioprosthesis, and we tested several currently known processing methods for bovine pericardium and we then compared the results. Material and Method: Fresh bovine pericardium was collected at the butcher shop with using aseptic technique, and each piece of pericardium was fixated and/or decellularized by 16 representative methods. We measured the permeability and compliance of the processed bovine pericardium samples, and measured them again after exposure to the fatigue stimuli. All the pieces of pericardium underwent microscopic examinations before and after the fatigue stimuli. Result: A mixture of glutaraldehyde and solvent treatment showed better mechanical durability than did the single glutaraldehyde treatment. High concentration glutaraldehyde treatment showed equal or no worse results than did low concentration glutaraldehyde treatment. After SDS (sodium dodecylsulfate) decellularization, the mechanical property of the bioprosthesis became much worse ($20{\sim}190$ times) and the mechanical durability to the fatigue stimuli was also very poor. Conclusion: We obtained the basic durability data after various fixation methods with using a home-made fatigue test instrument.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.37-45
• /
• 2006

Recently, wood-framed houses has been built in the Korea for pension. Wood is good material for human healthy, while the construction lumbers are treated with preservative such as CCA (chromated copper arsenate), which contain some toxic elements for human body. However, if the waste woody biomass treated with various heavy metals, which has been collected from house construction or demolition, was fired in the field, and incinerated or landfilled after mass collection, such components will result in the toxic air pollutants in the burning or land fills, and spreaded into other areas. So the careful selection of wood and chemicals are required in advance for house construction, in particular, for environment-friendly housings. Therefore, this study was carried out to determine the content of toxic heavy metals in woody materials such as domestic hinoki and imported hemlock treated with CCA for housing materials, and the post-treated wood components such as organic fertilizer, sludge, dry-distilled charcoal and carbonized charcoal, to be returned finally into soil. The results are as follows. 1) The chemical analysis of toxic trace elements in various solid biomass required accurate control and management of laboratory environment, and reagents and water used, because of the error of data due to various foreign substances added in various processing and transporting steps. So a systematic analyzers was necessary to monitor the toxic pollutants of construction materials. 2) In particular, the biomass treated with industrial biological or thermal conditions such as sludge or charcoals was not fully dissolvable after third addition of $HNO_3$ and HF. 3) The natural woody materials such as organic fertilizer, sludge. and charcoals without any treatment of preservatives or heavy metal components were nontoxic in landfill because of the standard of organic fertilizers, even after thermal or biological treatments. 4) The CC A-treated wood for making the construction wood durable should not be landfilled, because of its higher contents of toxic metals than the criterion of organic fertilizer for agriculture or of natural environment. So the demolished waste should be treated separately from municipal wastes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1793-1797
• /
• 2007

한강 "수변구역"에서 비점오염물질의 공공수역 유입을 억제하기 위한 다양한 방법들 중에서 보편적이고 자연친화적인 방법은 다양한 생물의 서식공간이며, 동시에 본류로 유입되는 과정에서 수질을 정화시키는 수질개선 공간인 수변완충구역, 또는 지대를 설정하여 관리하는 것이다. 그러나 이러한 수변완충지대 효과 분석 및 설정에 관한 연구는 국내에서 아직 수행되지 않았다. 본 연구의 목적은 수변구역의 자정능력을 높이는 것은 물론 그 밖의 하천 연안에서 비점오염물질의 차단과 처리능력을 증진시키고 수변 생태계의 서식처 보전 및 복원을 위해서 수변완충지대의 수질정화 기술개발과 생물다양성을 창출하는 수변완충지대 조성 기법을 개발하는데 있다. 본 연구에서는 기존 수변완충지의 추가적인 조성과 보완, 시험완충지 생태구조 및 기능 기초조사, 시험완충지 오염부하 저감효과의 실험 및 분석, 수변완충지대 설치 구상 등의 연구를 수행하였다. 수행 지역은 한강수계 지역으로 남한강 수변인 경기도 양평군 병산리에서 실시하였으며, 잔디와 갈대, 갯버들, 혼합지역, 자연그대로의 상태(대조지역)의 5 구역으로 구분하였고, 깊이별로 샘플을 채취하여 유입수와 표면유출, 하부유출을 비교해 보았다. 연구 결과, 5 가지 구역 중 잔디 구역의 SS, T-N, T-P, TOC의 제거 효율이 각각 76.7%, 85.2%, 97.6%, 83.3%로 가장 좋은 오염물질 제거 효율을 보였으며, 깊이 별 분석에서는 표면유출에서 하부유출로 갈수록 월등한 효율을 보였다. 따라서 본 연구를 통하여 비점오염원에 대한 한강수계의 수자원 보호 효과를 기대할 수 있고, 수변완충지대의 조성, 유지관리기술의 개발을 통한 수변완충지대의 계획과 설계에 직접적인 기여를 할 수 있으며, 수변구역에 설치 가능한 Riparian Buffer Zone의 중요성과 효율성을 알려 현재 하상 저니 준설 및 폭기 위주의 사업에서 생태 공학적 복원을 적극 고려한 정화사업으로 확대 추진하고자 한다.해결책을 얻어내는 상호보완적인 결과를 추구한다. 그가 디자인하는 작품은 전형적인 이미지를 내포하지 않는다. 즉 그의 작품은 기존의 가치와 이념적인 것은 배제하고, 창의적인 개념을 도출하였다.형모서리는 건물 특화 성격이 강하므로 불가피할 경우 소형 액센트 광고 위치를 미리 벽면으로 할애하는 것이 경관 및 입면계획에 유리한 것으로 분석되었다. 불확실도 해석모형 등의 새로운 기능을 추가하여 제시하였다. 모든 입출력자료는 프로젝트 단위별로 운영되어 data의 관리가 손쉽도록 하였으며 결과를 DB에 저장하여 다른 모형에서도 적용할 수 있도록 하였다. 그리고 HyGIS-HMS 및 HyGIS-RAS 모형에서 강우-유출-하도 수리해석-범람해석 등이 일괄되게 하나의 시스템 내에서 구현될 수 있도록 하였다. 따라서 HyGIS와 통합된 수리, 수문모형은 국내 하천 및 유역에 적합한 시스템으로서 향후 HydroInformatics 구현을 염두에 둔 특화된 국내 수자원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는 효과를 발휘하는 것이 아닌가 해석된다. 이와 같은 연구결과를 통해 생다시마를 주원료로 개발된 생다시마차와 생다시마 음료가 만성 기능성 변비 증세를 개선하는 효능이 잠재적으로 있음을 확인하였다. 그러나 생약제재의 변비약 수준으로 변비 개선 효능을 증대하기 위해서는 재료 배합비의 개선이나 대장 운동기능을 향상시키는 유효성분의 보강 등이 필요하다는 점도 알 수 있었다.더불어 산화물질 해독에 관여하는

• Korean Journal of Ecology and Environment
• /
• v.41 no.2
• /
• pp.206-215
• /
• 2008

Temporal and spatial distributions of salinity, temperature, dissolved oxygen (DO), and turbidity were investigated at seven sites in the upper regions of brackish Lake Sihwa with a limited water exchange, from March to October 2005. During the study period, salinity and temperature varied $0.1{\sim}29.9\;psu$ and $4.7{\sim}28.1^{\circ}C$, respectively, depending on seasons and sites sampled. A distinct halocline profile showing the maximum density gradient (difference over $20\;psu\;m^{-1}$ between surface and bottom layers) was observed during the rainy season, due to the decrease of salinity in surface layers by freshwater inflow. This result implies that rainfall event is the important factor forming the halocline. On the other hand, the depth and location of haloeline varied with the amount of seawater through the sluice gates and the operation systems (inflow or outflow). High DO (over 300% saturation) was observed at surface layer above the halocline in April when red tide occurred, whereas low DO (below 20% saturation) was at the bottom layer below the halocline in the rainy season. Turbidity ranged $1.5{\sim}80.3\;NTU$ showing the maximum turbidity at the layers above or upper the halocline. As a result, the distributions of DO and turbidity in the upper regions of brackish Lake Sihwa were largely affected by the variation of salinity. Also, when the halocline was formed, the water quality between upper and lower water layers may be expected completely different. This study suggests that the physicochemical characteristics of water in the brackish regions are closely associated with the causes of eutrophication such as red tide and DO deficit.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel. undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesio-distally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference on fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even of that portion consists of mainly enamel and a little dentin structure.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel, undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesiodistally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference in fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even if that portion consists of mainly enamel and a little dentin structure.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.109-116
• /
• 2008

In this study, the breads with medicinal herbs (MH) composites showing immunostimulating activity were prepared and their characteristics were examined. Fourteen kinds of medicinal herbs were extracted with hot water and divided into 3 groups (MH-1, MH-2, MH-3) based on their contents. All groups showed immunostimulating activity in terms of macrophage phagocytosis, nitrite production, cytostatic activity and cytokine production. In the preparation of breads containing MH extracts of various contents (0, 30, 50, 70, and 100%), there was no significant difference among dough pHs of all groups after first fermentation, but loaf volume was significantly (p<0.05) increased in 70% added group while decreased in 30%, 50%, and 100% added groups compared to the control. The "a" and "b" values of bread crumb increased with the content of MH extracts while "L" value decreased, but these values of bread crust were similar to the control group. Most improvements in hardness, adhesiveness, gumminess and chewiness of bread were noticed by the addition of 70% MH extracts, but those of springiness, cohesiveness and resilience were mostly by the 50% addition ones. Through the sensory evaluation, it was revealed that mouth feeling, taste and overall preference decreased at breads containing 70% and 100% extracts, although appearance and crumb texture were not significantly (p<0.05) different among all groups.