• Journal of Applied Biological Chemistry
• /
• v.55 no.2
• /
• pp.129-133
• /
• 2012

To exploit plant growth promoting bacteria in the roots of Miscanthus sacchariflorus, a biomass energy crop, total 64 bacteria were isolated. For the investigation of plant growth promoting effects from the isolated bacteria, production of indole acetic acid (IAA) and 1-aminocyclopropane-1-carboxylic acid (ACC) deaminase activities were tested and other cultural conditions were examined. As results, 8 isolates showed plant growth promoting effects on the M. sacchariflorus and an isolate designated Agrobacterium sp. BE516 has the highest activity by enhancing the shoot elongation over 2-fold than the control. Agrobacterium sp. BE516 produced 64 ${\mu}g$ IAA per mL and showed ACC deaminase activity which is involved in the resistance to environmental stress such as high salt and drought. It could grow at low temperature in the range from 4 to $15^{\circ}C$, at pH 4.0 and at 4% NaCl. These results indicate that the Agrobacterium sp. BE516 can be useful as a bio-fertilizer for M. sacchariflorus under the stressed conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2497-2502
• /
• 2014

The 5 wt.% Ga-doped zinc oxide (GZO) thin films were fabricated on PES substrates with various RF power 50~80 W by using RF magnetron sputtering in order to investigate the optical and electrical properties of GZO thin films. The XRD measurement showed that GZO thin films exhibit c-axis orientation. At a RF power of 70W, the GZO thin film showed the highest (002) diffraction peak with a Full-Width-Half-Maximum (FWHM) of $0.44^{\circ}$. AFM analysis showed that the lowest surface roughness (0.20 nm) was obtained for the GZO thin film fabricated at 70 W of RF power. The electrical property indicated that the minimum resistivity ($6.93{\times}10^{-4}{\Omega}{\cdot}cm$) and maximum carrier concentration ($7.04{\times}10^{20}cm^{-3}$) and hall mobility ($12.70cm^2/Vs$) were obtained in the GZO thin film fabricated at 70W of RF power. The optical transmittance in the visible region was higher than 80 %, regardless of RF power. The optical band-gap showed the slight blue-shift with increased in carrier concentration which can be explained by the Burstein-Moss effect.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.38-43
• /
• 2009

In this study, binderless consolidation processes of ultra foe Si powder, by-products of making high purity poly-Si in the current method, were systematically investigated for use as economical solar-grade feedstock. The average diameter of the silicon powder was $7.8{\mu}m$. The main contaminants of the fine silicon powder were $SiO_2$ type oxide and humidity. The chemical pretreatment using the HF solution was observed to be effective for the improvement of the compactability of the silicon powder and the density ratio and the strength of the silicon powder compacts. The yield of the binder-free consolidation process increased by 20% under a vacuum condition. In as-received state, the silicon powder were not pure enough to be used as solar grade feed-stock material. After the dry chemical treatments, a sufficiently high purity above solar-grade was able to be achieved.

• Journal of the Korean Institute of Gas
• /
• v.7 no.2 s.19
• /
• pp.22-32
• /
• 2003

Al-brass material is generally used at the state of plastic deformation, for example; bending, extension of bell mouth at shell and tube type heat exchanger. And SCC(stress corrosion cracking) of Al-brass material will be affected by residual stress as plastic deformation. SCC results from synergism between mechanical factor and corrosion environment. Mechanical factor is stress that directly relates with stress intensity factor at the crack tip. This paper was studied on the effect of stress on SCC of Al-brass tube under in $3.5\%$ NaCl. + $0.1\%\;NH_4OH$ solution by constant displacement tester. Increasing of acidified water flow into sea and speeds up corrosion rate of Al-brass which is used as a tube material of vessel heat exchanger by polluted coast seawater. The experimental results are as follow The latent time of SCC occurrence gets longer as the initial stress intensity factor($K_{Ii}$) gets lower The main crack was propagated as the initial stress intensity factor($K_{Ii}$) gets higher, and secondary cracks occurred by electro-chemical factor a(ter stage of released stress. Dezincification phase showed around the crack, and the range of dezincification gets wider as the initial stress intensity factor($K_{Ii}$) gets higher.

• Journal of Chest Surgery
• /
• v.34 no.4
• /
• pp.305-310
• /
• 2001

배경: 판막대치술에 냉동보존판막의 이용은 감염에 대한 저항성과 탁월한 혈류역학으로 증가하고 있다. 판막육아세포의 생존율은 이식된 냉동보존 판막의 내구성에 영향을 미친다고 알려져 있고, 세포의 생존율은 warm ischemic time에 영향을 받는 것으로 알려져 있다. 냉동 보존하여 이식할수 있는 공여 판막의 warm ischemic time 의 적정치를 구하기 위하여, warm ischemic time에 다른 세포의 생존율을 관찰하였다. 대상 및 방법: 1.조직의 획득: 실제 판막을 냉동 보존하는 상황과 유사하게 하기 위하여 도살된 돼지의 심장과 폐를 밀봉한 상태로 4~8$^{\circ}C$로 냉장 보관하여 (warm ischemic time) 일정시간이 경과한 후, 심장과 폐에서 심장을 적출하여 4$^{\circ}C$하트만 용액에 24시간 보관하였다.(cold ischemic time). Warm ischemic time에 따라 2시간, 12시간, 24시간 36시간으로 4군으로 나누었으며, 각 군마다8개의 돼지 심자을 이용하였다. 2. 조직의 멸균: RRMI 1640에 항생제를 섞은 용액에 멸균하고, 3 냉동과 냉동보존; American tissue bank에서 제시한 냉동곡선에 따라 냉동하여, 액체질소 탱그에서 7일간 보존 후 해동하였다. 4. 생존율의 측정; 판막의 생존율 검사는 Triphan blue test로 하였고, 각각 warm ischemic period후 , cold ischemic period 후, 해동 후에 시행하였다. 5. 분석방법; 분석은 SAS program의 pearson correlation으로 하였다. 결과: 1. 멸균, 냉동과 냉동 보존하는 과정의 적합성을 규명하기 위하여 이 과정의 전과 후인 Cold ischemic period 후와 해동 후의 대동맥판막의 생존율의 차이를 비교한 결과, 차이가 없었다.(p =0.619). 2, warm ischemic time 과 warm ischemic period 후 , Cole ischemic period 후와 해동후의 대동맥판막의 생존율과의 correlation 은 각각 R= -0.857, -.0.673과 -0.549로 강하거나 , 혹은 뚜렷한 음성적 관계가 있었다. 삼천판막의 생존율과 대동맥판막의 생존율과 뚜렷한 상관관계가 있었다. 결론; 1. Warm ischemic time 이 길어지면 판막유아세포의 생존율이 감소하고, 12시간 이상되면 해동후의 판막육 아페포의 생존율이 50% 이하로 떨어졌다. 2. 본 연구에서 시행한 판막의 냉동보존방법은 세포의 생존율을 유지하는데 양호한 것으로 나타났으며 삼천판막으로 대동맥판막의 생존율을 예측해 볼 수 있다. 3. 그러나, 이식후 장기간 적절한 내구성을 갖기 위한 이식될 판막의 생존율은, 육아세포에 관한 여구가 좀 더 되어야 규명될 것이다.

• Radiation Oncology Journal
• /
• v.4 no.2
• /
• pp.115-128
• /
• 1986

Hyperthermia can enhance the radiation effect as a synergistic reaction in combined X-ray irradiation and hyperthermia; hyperthermia sensitize radioresistant S-phase cells and inhibit cellular recovery from sublethal damage. We fabricated 100 watts, 2450 MHz microwave applicator for hyperthermia and planned the method and condition of heating and measured the temperature by using Agar phantom as a preliminary test. For biological examination, 102 rats were divided into 4 groups as hyperthermia, X-ray irradiation (6Gy-15Gy), combined X-ray and hyperthermia, and normal control groups. Microscopic examination of the rectum and bladder was done and the results were as followings: 1. The microwave generator with 100 watts, 2450MHz magnetron could be heating up to $40^{\circ}{\sim}50^{\circ}C$ for one hour in living tissue. 2. The thermal distribution in tissue equivalent phantom with microwave can be maintained at $40^{\circ}{\sim}44^{\circ}C$ in area of 3cm in depth and 2-10cm in diameter. 3. In Hyperthermia alone group, there was submucosal edema of the rectum but no histologic change in the urinary bladder was seen. 4. The minimal necrosis of the mucosa was appeared in the rectum and bladder after 15 days of 6 Gy and 8 Gy irradiation respectively. The minimal necrosis of the muscle layer of rectum and bladder was appeared after 15 days of 8Gy and 60days of 10Gy irradiation respectively. 5. In combined group of radiation and hyperthermia, thermal enhancement ratio (calculated at necrosis of mucosa and muscle layer) of rectum and bladder was 1.0, and it suggest that there is no change of tolerance dose of normal rectum and bladder.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.436-441
• /
• 2011

Metal coating with several nanometer thickness was applied on the carbon nanotubes (CNTs) in order to improve electron emission characteristics and emission reliability for the potential applications in the area of various electron sources and displays. CNTs were grown on the 2-nm thick Invar (52% Fe, 42% Ni, 6% Co alloy)-catalized Si substrate by using plasma-enhanced chemical vapor deposition at $450^{\circ}C$. In order to reduce the spatial density of densely packed CNTs, as-grown CNTs were partly etched back by $N_2$ plasma and subsequently coated with 5~150 nm thick Ti by a sputtering method. 5 nm thick Ti-coated CNTs produced four times higher emission current density at the electric field of 6 V/${\mu}m$ and much lower emission current fluctuation, compared with the as-grown CNTs. These improved emission properties are mainly due to not only the work function of Ti (4.3 eV) lower than that of pristine CNTs (5 eV), but also lower contact resistance and better adhesion between CNT emitters and substrate accomplished by Ti coating.

• Korean Journal of Materials Research
• /
• v.2 no.5
• /
• pp.375-382
• /
• 1992

Molybdenum silicide films have been prepared by sputtering from a single composite MoS$i_2$ source on both P, B$F_2$respectively implanted (5${\times}10^{15}ions/cm^2$ single crystal and P implanted (5${\times}10^{15}ions/cm^2$) polycrystalline silicon substrates followed by rapid thermal annealing in the ambient of argon. The heat treatment temperatures have been varied in the range of 600-l20$0^{\circ}C$ for 20 seconds. The properties of Mo-silicide and the diffusion behaviors of dopant after the heat treatment are investigated using X-ray diffraction, scanning electron microscopy(SEM) , secondary ions mass spectrometry(SIMS), four-point probe and $\alpha-step.$ Annealing at 80$0^{\circ}C$ or higher resulted in conversion of the amorphous phase into predominantly MoS$i_2$and a lower sheet resistance. There was no significant out-diffusion of dopants from both single crystal and polycrystalline silicon substrate into molybdenum silicide layers during annealing.

• Journal of the Korean Society of Radiology
• /
• v.4 no.2
• /
• pp.21-25
• /
• 2010

Recently, various semiconductor compounds as radiation detection material have been researched for a diagnostic x-ray detector application. In this paper, we have fabricated the CdS detecton sensor that has good photosensitivity and high x-ray absorption efficiency among other semiconductor compounds, and evaluated the application feasibility by investigating the detection properties about energy range of diagnostic x-ray generator. We have fabricated the line voltage selector(LCV) for a signal acquisition and quantities of CdS sensor, and designed the voltage detection circuit and rectifying circuit. Also, we have used a relative relation algorithm according to x-ray exposure condition, and fabricated the interface board with DAC controller. Performance evaluation was investigated by data processing using ANOVA program from voltage profile characteristics according to resistive change obtained by a tube voltage, tube current, and exposure time that is a exposure condition of x-ray generator. From experimental results, an error rates were reduced according to increasing of a tube voltage and tube current, and a good properties of 6%(at 90 kVp) and 0.4%(at 320 mA) ere showed. and coefficient of determination was 0.98 with relative relation of 1:1. The error rate according to x-ray exposure time showed exponential reduction because of delayed response velocity of CdS material, and the error rate has 2.3% at 320 msec. Finally, the error rate according to x-ray dose is below 10%, and a high relative relation was showed with coefficient of determination of 0.9898.

• Parasites, Hosts and Diseases
• /
• v.29 no.1
• /
• pp.67-86
• /
• 1991

In order to determine the seasonal prevalence and population dynamics of Culex tritaeniorhynchus in relation to the epidemics of Japanese encephalitis, and ecology of these vector mosquito in Kyungpook Province, Korea, studies were con- ducted during the Period of 7 years from 1984 to 1990. Cx. tritaeniorhynchus first collected in June between 4th and 28th, and trapped in large numbers during the period from mid-August to early September, showed a simple sharply pointed one-peaked curve. There was a gradual decrease from mid-September, with a very small number of them collected until early October in every year. The average number of Cx. tritaeniorhynchus rapidly decreased after 1985, and the number became particularly low in 1989. The highest population density, which was observed in August during the initial three years, was found to be delayed in the following years, accompanied by a decrease in the number of mosquitoes. In the trend of nocturnal activity of Cx. tritaeniorhynchus, with oncoming darkness they become very active, gradually decreasing in activity toward mid night, but slightly increasing toward dawn. The immature stages of Cx. tritaeniorhynchus were first found in rice fields contributing to peak adult densities in mid-July. The highest average densities of Cx. trisaeniorhynchus was 14,900 per m2 on mid-August 19th. The larval Cx. tritaeniorhynchus showed high resistance levels and resistance ratios against 5 organophosphorus compounds. In the adult horisontal life table characteristics of Kyungsan colonies of Cx. tritaeniorhynchus under insectary condi- tions, life expectancy was 28.3 days for males and 59.8 days for females. The net reproductive rate was 7.8 and generation time was 25.6 days.