• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.43-58
• /
• 2018

In this study, the load-transfer behavior along the shaft of the prebored and precast piles was investigated by pile loading tests. Special attention was given to quantifying the skin frictions developed between the pile-soil interfaces of the 14 instrumented test piles. Based on this detailed field tests, the load - settlement curves and axial load distributions of piles were obtained and the load-transfer curves (t-z curves) for the test piles were proposed. As such, it is found that the test results show two different load transfer behaviors; ductile and brittle behavior curves. The corresponding t-z curves are proposed based on the hyperbolic- and sawtooth-shape, respectively. By validating the accuracy of the proposed curves, it is also found that the prediction results based on the proposed load-transfer curve are in good agreement with the general trends observed by the field loading tests.

• Journal of Environmental Science International
• /
• v.27 no.12
• /
• pp.1241-1247
• /
• 2018

This study was conducted to evaluate resistance of 10 different cowpea cultivars which were introduced from the United States against two major root-knot nematodes, Meloidogyne arenaria and M. incognita, that affect greenhouse crop cultivation in Korea. The results showed that the resistance of the tested cultivars to the root-knot nematodes varied with the cultivar. Texas Cream 40 showed moderate resistance to M. arenaria whereas the other cultivars were susceptible. Purple Hull Pinkeye and Texas Pinkeye Purple Hull were found to be resistant to M. incognita, whereas Mississippi Silver showed moderate resistance and the other cultivars were susceptible. As the cultivars exhibit resistance to M. arenaria and M. incognita, such cultivars resistant to root-knot nematodes should be considered during the cultivation of cowpea as a green manure crop.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.35-41
• /
• 2018

Electrical impedance tomography (EIT) is a kind of nondestructive testing technique that obtains the internal resistivity distribution from the voltages measured at the electrodes located outside the area of interest. However, an image reconstruction problem in EIT has innate non-linearity and ill-posedness, so that it is difficult to obtain satisfactory reconstructed results. In general, a neural network can efficiently model the input and output relationships of a non-linear system. This paper proposes a method for estimating the position and size of a circular target using a multi-layer neural network. To verify the performance of the proposed method, neural network was trained and various computer simulations were performed and satisfactory performance was verified.

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.233-240
• /
• 2019

The aim of this study was to provide basic data that could identify and help prevent a slow-moving landslide using an analysis of the relationship between below-ground characteristics and water from three slow-moving landslide areas in Pohang, Gyeongsangbuk-do, South Korea. Surface surveys, resistivity, seismic exploration, well logging, and boring surveys were conducted in the three areas. The main direction of discontinuous surface was matched with the slope direction of the three landslides. The results indicatedthat slow-moving landslides might occur in the direction of the slope. Underground water was distributed within the crush zones within the three landslide areas and flowed along the tensile cracks. There was a significant difference (p<0.01) between the mean angle of the tensile cracks and that of the underground waterflow (p=0.8019). These results indicated that the progress of a slow-moving landslide can be forecast by monitoring the location and flow of underground water within a known slow-moving landslide area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1507-1518
• /
• 2020

High-quality images have a lot of information, so sensitive data is stored by encryption for private company, military etc. Encrypted images can only be decrypted with a secret key, but the original data cannot be retained when attacked by the Shear attack and Noise pollution attack techniques that overwrite some pixel data with arbitrary values. Important data is the more necessary a countermeasure for the recovery method against attack. In this paper, we propose a random number generator PingPong256 and a shuffling method that rearranges pixels to resist Shear attack and Noise pollution attack techniques so that image and video encryption can be performed more quickly. Next, the proposed PingPong256 was examined with SP800-22, tested for immunity to various noises, and verified whether the image to which the shuffling method was applied satisfies the Anti-shear attack and the Anti-noise pollution attack.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.323-323
• /
• 2023

유역의 증발산량 자료는 물순환 과정을 규명하는 매우 중요한 자료 중의 하나이며, 물순환 성분별 명확한 산정 결과는 수자원 개발과 물환경 보전에 중요한 정보를 제공할 수 있다. 본 논문에서는 임진강 유역(유역출구(한강합류점) 기준, 유역면적 8,138.9km²)을 대상으로 5개년(2018~2022) 기상관측자료를 이용하여 증발산량을 산정하였으며, 그 외의 수문관측자료를 통해 물수지 분석도 수행하였다. 증발산량 산정은 세계식량기구(FAO)에서 제시한 Penman-Monteith equation을 적용하여 일별증발산량을 산정하였으며, 작물의 종류에 따른 계수는 잔디의 경우를 채택하였다. 본 방정식을 통해 산정된 증발산량(ET_o)은 기준작물에 수분의 공급에 제한이 없는 상황에서 산정된 기준 증발산량(reference evapotranspiration)을 의미하며, 기준 증발산량을 실제 증발산량으로 변환하기 위해서는 작물계수를 고려해야 한다. 작물계수는 식생의 높이, 알베도, 식생의 저항, 토양으로부터의 증발 등의 영향을 받게 되나, 더욱더 명확하게는 식물에서의 증산을 설명하는 기본 작물계수와 토양에서의 증발을 설명하는 토양계수의 합을 통해 계수를 산정하게 된다. 임진강 유역에 공간적으로 분포된 작물계수를 정확히 산정하기에는 한계가 있으므로 잔디의 경우로 한정하여 산정된 기준 증발량은 833.0mm(5개년 평균값)이다. 각 물순환 성분별로 생성된 임진강 유역의 5개년 평균값인 유역평균강우량은 1,412.9mm이며, 하천유출량은 804.9mm(유역평균강우량 대비 57.0%), 실제 증발산량은 442.3mm(유역평균강우량 대비 31.3%, 기준 증발산량 대비 약 53.0%), 유역저류량은 165.7mm(유역평균강우량 대비 11.7%)이다. 유역평균강우량은 8개 관측소(양덕, 원산, 신계, 개성, 평강, 철원, 동두천, 파주) 강우량의 유역평균값이며, 하천유출량은 유역출구의 상류 관측소인 비룡대교 관측소(유역면적 6,784.0km²) 유출량의 유역면적비 적용값이다. 실제 증발산량은 기준 증발산량 산정값에 해당 유역내 존재하는 설마천 유역의 기준 증발산량과 실제 증발산량 비율(약 53.0%)을 적용한 값이며, 유역저류량은 전제적인 물수지 분석을 통해 얻어진 추정값이다. 이와 같이 산정된 물순환 성분별 자료는 유역의 물순환 과정 규명을 위한 기초자료로 매우 유용하게 활용될 수 있으며, 유역 물관리를 위한 의사결정 과정에 중요한 역할을 할 수 있을 것으로 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.322-322
• /
• 2023

유역의 증발산량 자료는 물순환 과정을 규명하는 매우 중요한 자료 중의 하나이며, 물순환 성분별 명확한 산정 결과는 수자원 개발과 물환경 보전에 중요한 정보를 제공할 수 있다. 본 논문에서는 한국건설기술연구원에서 운영하는 설마천 유역(전적비교 수위관측소 기준, 유역면적 8.48km²)의 5개년(2018~2022) 기상관측자료를 이용하여 증발산량을 산정하였으며, 그 외 강우량, 하천유출량, 지하수함양량 자료를 이용하여 물수지 분석도 수행하였다. 증발산량 산정은 세계식량기구(FAO)에서 제시한 Penman-Monteith equation을 적용하여 일별 증발산량을 산정하였으며, 작물의 종류에 따른 계수는 잔디의 경우를 채택하였다. 본 방법을 통해 산정된 증발산량(ET₀)은 기준작물에 수분의 공급에 제한이 없는 상황에서 산정된 기준 증발산량(reference evapotranspiration)을 의미하며, 기준 증발산량을 실제 증발산량으로 변환하기 위해서는 작물계수를 고려해야 한다. 작물계수는 식생의 높이, 알베도, 식생의 저항, 토양으로부터의 증발 등의 영향을 받게 되나, 더욱더 명확하게는 식물에서의 증산을 설명하는 기본 작물계수와 토양에서의 증발을 설명하는 토양계수의 합을 통해 계수를 산정하게 된다. 설마천 유역에 공간적으로 분포된 작물계수를 정확히 산정하기에는 한계가 있으므로 잔디의 경우로 한정하여 산정된 기준증발량은 885.9mm(5개년 평균값)이다. 각 물순환 성분별로 생성된 설마천 유역의 5개년 평균값인 유역평균강우량은 1,307.3mm이며, 하천유출량은 799.7mm(유역평균강우량 대비 61.2%), 실제 증발산량은 469.5mm(유역평균강우량 대비 35.9%, 기준 증발산량 대비 약 53.0%), 유역저류량은 38.1mm(유역평균강우량 대비 2.9%)이다. 유역평균강우량은 3개 관측소(감악산, 설마리, 전적비교) 강우량의 유역평균값이며, 하천유출량은 유역출구의 수위-유량관계곡선식 환산유량, 유역저류량은 과거년(2012~2018)의 지하수 관측자료를 통해 산정된 지하수함양량을 기초로 하였다. 그리고 실제 증발산량은 기준 증발산량 산정값과 전체적인 물수지 분석을 통해 얻어진 값이다. 이와 같이 산정된 물순환 성분별 자료는 유역의 물순환 과정 규명을 위한 기초자료로 매우 유용하게 활용될 수 있으며, 유역 물관리를 위한 의사결정 과정에 중요한 역할을 할 수 있을 것으로 기대된다.

• Journal of Korea Foundry Society
• /
• v.43 no.4
• /
• pp.194-200
• /
• 2023

The heat transfer of the mold in the casting process has been calculated by considering the mold as a uniform isotropic material. Since the mold was not a uniform isotropic material, however, the calculation was performed with approximate values, and in particular, estimated values were used when considering compaction and the amount of added binder. In this study, a calculation algorithm of the thermal properties of the sand mold was developed. An algorithm for calculating the thermal conductivity and specific heat based on a thermal resistance model in the case of mono-dispersed sand grains was also developed and applied to sand molds with various size distributions. The thermal properties of sand were calculated for artificial sand, and relatively close values compared to the experimental values were obtained.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.39-44
• /
• 2023

In this study, the particle size of Si polycrystals was controlled through wet-sedimentation method, and changes in the capacity and cyclic characteristics of the Si anode material according to the particle size were observed. After wet-sedimentation of Si particles pulverized by a vibration mill, the non-uniform particle distribution of Si was uniformly controlled. The d₅₀ of a sample in which Si was sedimented for 24 hours decreased to 0.50 ㎛. As a result of the electrochemical characteristic analysis, the Rct value representing the resistance in the electrode was significantly reduced due to the decrease in particle size. The unclassified Si sample exhibited a discharge capacity of 2,869 mAh/g in the first cycle, and decreased to 85.7 mAh/g after 100 cycles. The sample in which Si was classified for 24 hours showed a capacity of 3,394 mAh/g initially, and maintained a capacity of 1,726 mAh/g after 100 cycles. As the size of the Si particles decreased, the discharge capacity increased and the cycle life was also increased.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.47-57
• /
• 2007

In this study, the analysis of density characteristics of some dredged and reclaimed ground sites, which is necessary for liquefaction evaluation of a dredged and reclaimed ground, was conducted. From analyzing a simplified liquefaction potential evaluation using SPT-N values which have been applied as domestic earthquake-resistant design criterion, improvement scheme is suggested. Based on the analysis result of density characteristics, it was found out that the relative density and the intial N-value ranged respectively $40{\sim}50%\;and\;5{\sim}8$. In the case of applying Liao & Whitman's equation to correct effective overburden pressure, liquefaction resistance of the upper ground that is relatively weaker than that of lower ground is overestimated. So, Skempton's equation is recommended. And the N value with depth which is applied for design process should be estimated by the exponential equation, $N=1.35{\sigma}'^{0.75}$.