• The Journal of Engineering Geology
• /
• v.29 no.3
• /
• pp.223-236
• /
• 2019

Resistivity surveys can identify the distribution of geological units and structures (including fragmented fault zones), the extent of weathered and modified geological strata, and the characteristics of groundwater. This study aims to analyze the underground sedimentary layers and geological structures near the Nari and Albong Basins of Ulleung-do, Korea, focusing on six survey lines to identify the spatial trends in subsurface resistivity. A modified dipole array method (D method) was employed, combining resistivity results obtained by existing dipole array methods (A and C methods). The modified method provides optimal analysis of the cross-section of underground resistivity, and shows a clear boundary between a low-resistivity zone (${\leq}500{\Omega}{\cdot}m$) of sedimentary layers and weak zones, and a high-resistivity zone (${\geq}5,000{\Omega}{\cdot}m$) of volcanic rock (trachyandesite). The estimated average thickness of the sedimentary layers is 50~100 m for the Albong Basin and 100~200 m for the Nari Basin. An anomaly zone, different from the weak zone in the bedrock, is identified as a caldera fault, and the low-resistivity zone extends from the surface down to the lowest survey depths.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.3-3
• /
• 2021

하천의 식생은 생태서식처 제공, 강턱이나 하안 경사의 안정, 영양염류나 오염물 차단에 의한 수질 개선 등의 다양한 생태서비스를 제공하는 반면, 과도하고 편중된 식생 분포로 인해 흐름저항이 증가하고 이로 인한 홍수위 상승과 홍수피해 위험이 가중될 수 있다. 기후변화 영향과 토지이용 변화에 따른 수리수문 특성 변화와 유역으로부터 영양염류의 유입은 하천내 식생이 과도하게 퍼지는 직접적인 원인이 될 수 있다. 과도한 식생분포로 인한 흐름저항과 홍수위 상승을 평가하기 위해 식생하도의 흐름저항과 관련된 매개변수의 다양성과 복잡성에 따른 해석상의 한계에도 불구하고 이에 대한 이론적 해석과 수학모형의 개발, 실험실 수로와 하천현장조사, 수치모형을 이용한 예측 등의 다양한 연구가 수행되고 있다. 본 연구에서는 소규모 실험실 수로에서 단순화된 식생 구조와 배열이 적용되는 한계성과 상류에서 유입되는 유량과 유속 등의 수리조건을 통제할 수 없는 현장실험의 한계성을 보완하고자 목본류 형태의 식생패치를 실규모 하천실험 수로에 조성하여 통제된 수리조건에서의 식생하도의 구간 흐름저항을 추정하기 위한 계측 실험을 수행하였다. 실규모 실험에서는 피에조미터 형식의 정밀 압력식 센서를 이용하여 수위와 수면경사를 계측하였으며, 실험구간의 접근 수로에서 ADCP(Acoustic Doppler Current Profiler)를 이용하여 유입 유량에 대한 정보를 수집하였다. 전체 수로 길이 약 600 m, 하폭 11 m, 깊이 2 m 규모의 실규모 하도 일부 80 m 완경사 구간에 식생패치를 설치하고 구간 수면경사를 실측함으로써 식생하도의 흐름저항을 직접 산정하였다. 이러한 실규모 식생하도의 실험을 통해 식생패치의 밀도, 횡적 차단면적, 구간 차단부피, 목본 식생의 물리적 특성, 식생패치의 배열 등의 다양한 식생분포 조건에 따른 수리조건별 흐름저항 값의 변화를 분석할 수 있다. 식생하도에 대한 정확한 흐름저항 추정과 홍수위 변화에 대한 해석은 하천 식생의 생태서비스와 홍수방어의 하천 치수효과의 최적 솔루션을 제시하기 위한 하도관리의 다양한 방안을 제시하는데 필수적인 정보로 활용될 수 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.763-769
• /
• 2006

Gravity Model estimates target year's distributed trips using three variables like as origin zone's trip production, destination zone's trip attraction and traffic impedance between origin zone centroid and destination zone centroid. Estimating inner zone trip by gravity model is impossible because traffic impedance of inner zone has "0" value. So till today, for estimating inner zone trips, other methods like growth factor model are used. This study proposed inner zone trip estimation method that calculates inner zone's traffic impedance using established gravity model and estimates inner zone trips by putting calculated traffic impedance into the gravity model. 1988 year's surveyed O-D as basic year's O-D, proposed method's and existing methods(growth factor method and regression model)'s estimated results of 1992 year's and 2004 year's were compared with each year's real O-D by $x^2$, RMSE, Correlation coefficient. And resulted that the proposed method is superior than other existing methods.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.161-170
• /
• 2010

For the development of load and resistance factor design, reliability analysis is required to calibrate resistance factors in the framework of reliability theory. The distribution of measured-to-predicted pile resistance ratio was obrained based on only the results of load tests conducted to failure for the assessment of uncertainty regarding pile resistance and used in the conventional reliability analysis. In other words, successful pile load test (piles resisted twice their design loads without failure) results were discarded, and therefore, were not reflected in the reliability analysis. In this paper, a new systematic method based on Bayesian theory is used to update reliability indices of driven steel pipe piles by adding more proof pile load test results, even not conducted to failure, to the prior distribution of pile resistance ratio. Fifty seven static pile load tests performed to failure in Korea were compiled for the construction of prior distribution of pile resistance ratio. The empirical method proposed by Meyerhof is used to calculate the predicted pile resistance. Reliability analyses were performed using the updated distribution of pile resistance ratio. The challenge of this study is that the distribution updates of pile resistance ratio are possible using the load test results even not conducted to failure, and that Bayesian updates are most effective when limited data are available for reliability analysis.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.177-178
• /
• 2008

오늘날 DC 케이블은 도서간의 장거리 전력전송 및 서로 다른 주파수간의 계통연계를 위해서 널리 확대되어 사용되고 있다. 일반적으로 AC케이블의 전계는 절연체의 유전율에 의해서 결정되는 용량성 전계분포를 가지며, DC케이블은 과전 초기에는 절연체의 유전율 뿐만 아니라 저항율에 의해서 결정이 되며 충분한 시간이 흐른 후에는 저항율에 의해서 결정되는 저항성 전계분포를 가진다. 본 논문에서는 해저 HVDC 케이블용 함침 절연지 절연저항의 온도 및 전계 의존성을 평가하기 위해서 저항율을 측정 하였으며 통계처리를 통해서 온도 및 전계의존성을 구하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.101-120
• /
• 2023

Electrical resistivity survey have been widely conducted at diverse scales, from a few centimeters for laboratory tests to kilometers for field tests. It measures electrical resistance through relationship of electric potential difference and current between two electrodes penetrated on the surface of medium, and eventually quantifies electrical resistivity known as inherent properties of the medium. In field or full-scale test, it assumes the electrodes as equivalent half-sphere electrodes that have a same surface area with different electrodes for ease of calculation because the contact area between electrode and medium is small and sufficient distance between two electrodes. However, small-scale laboratory test is significantly affected by the electrode geometries (penetrated depth, height, radius of electrode and distance between electrodes), which change the equipotential surface and electric current flow. Indeed, the electrode geometries may eventually cause a difference of electrical resistivity value. This study reviews the theoretical electrical resistance derived with various electrode geometries (half-sphere, cylinder, cylindrical with half-spherical tip, cylindrical with conical tip) and verifies the developed numerical module by comparing results with the theoretical electrical resistance. The distributions of electrical resistance around electrodes and among electrodes are analyzed. In addition, it is discussed how the electrical characteristic of cylindrical electrode with conical tip widely used in field test has effect on the electric current flow.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4819-4825
• /
• 2011

This study tried to find out whether character patterns of elderly people are related to stress resistance using brain waves, personal physiological index of cranial nerves. The data were gathered by 1,108 seniors(age 65 and over) who were requested to check brain waves from September, 2007 to December, 2010 in Korean Institute for Research of Psychiatry. 552 of the subject showed the propensity to positive behavior, 556 of them showed the propensity to negative behavior. 735 of the subject showed the propensity to cheerful emotion, 373 of them showed the propensity to depressed emotion. As a result the propensity of emotion was significantly related to the stress resistance, but not the propensity of behavior. In other words, the propensity to cheerful emotion showed higher average stress resistance index than the propensity to depressed emotion. So the person who has the propensity to cheerful emotion can cope with stress better. This study shows the propensity to emotion is related to stress resistance. The influence of the propensity to emotion and how it works should to be studied.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.186-189
• /
• 2004

Sensor used by semiconductor process produced an MAP sensor and applied to several industry. Among those sensors divided as transducer which convert physical quantity into electrical value, piezoresistive type sensor has been studied for the properties and sensitivity of piezoresistor. In this paper, the variation of seismic mass which have been functioned as actuator moving the cantilever beam analyzed the effect on distribution of resistance change ratio and supposed the optimal shape and position of piezoresistor. The resulting are following; According to the increment of seismic mass size, the value of resistance change ratio decreased caused by improve the stiffness. Y directional piezoresistor is formed in spot of 100 m apart from cantilever edge and length of that is 800$\mu$m. To increase the sensitivity, piezoresistor is made as n-type and x-direction.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.447-453
• /
• 2003

연구지역은 경남 양산시 상북면 삼삼리 일원으로 양산단층과 인접하며 급한 경사의 자연사면으로 이루어져 있다. 수치지형자료를 이용하여 고도값을 갖는 자료층을 추출한 후 10m$\times$10m 크기의 격자별로 DEM으로 변환하고, 이로부터 단위 격자의 경사도, 경사방향도, 음영도를 작성하고 흐름분배 알고리즘을 이용하여 설정된 격자별로 상부사면의 기여면적과 습윤지수를 산정하였다. 높은 습윤지수를 보이는 지역은 북서-남동 방향의 선형구조로 나타나며, 국소지역의 전단단열 특성과 일치한다. 한편 연구지역에서 전기비저항 탐사를 실시하여 높은 습윤지수를 나타내는 지역과 저비저항 이상대의 분포를 비교한 결과 습윤지수가 높은 지역은 모두 낮은 전기비저항 이상대로 관찰된다. 즉 습윤지수는 암석의 화학적 풍화를 수반하는 파쇄대의 분포와 일치하며 이를 토대로 국소지역에서 파쇄대의 예측과 암석의 안정성을 예측하는 방법으로 이용될 수 있다.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.537-547
• /
• 2011

Electrical resistivity tomography surveys using boreholes were applied to reveal the cause of a catastrophic land subsidence accompanied by the excessive groundwater withdrawal in urban karst area and to map the connectivity of disseminated cavities over the study area. In order to understand the hydrogeological characteristics, resistivity using exsitu core samples, groundwater level for five boreholes, and hydraulic conductivity using slug test were measured. The hydraulic conductivity variation ranging from 0.8 to $9.3{\times}10^{-4}\;cm/s$ for five boreholes and a gentle slope of groundwater level indicated that there is no significant characteristics of hydraulic heterogeneity. Core samples of the lime-silicated rock were classified as three groups including cracked, weathered, and fresh and measured the resistivity values ranged from 103 to 161, 218 to 277, and 597 to 662 ohm-m, respectively. Drilling results that showed the cavity filled with clay materials and tomogram for this region indicated resistivity value lower than 50 ohm-m. From the inverted resistivity results for each section with five boreholes, cavity and fractured layer were distributed along the depth between 10 and 20 m overall area and cavities ranging from 4 to 6 m filled with clay materials.