• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.473-483
• /
• 2006

Although application of electrical methods in Korea began with observation of self potentials before World War II, the methods were developed slowly by the beginning of 1980's when a major burst of development activity took place. DC resistivity methods are applied in Korea more to geotechnical problems rather than to environmental ones unlike other developed countries. As with every other branch of technology, the evolving speed of the silicon chip and of streaming data to hard disk has revolutionized data collection and noise reduction processing. The last two decades saw major advances in data collection, processing, and interpretation of electrical data. Development of smooth-model two-dimensional (2D) resistivity inversion is one of the most visible changes to geophysical interpretation of the last 40 years and is now routinely applied to apparent resistivity data. The ability to represent resistivities in section rather than pseudosection view has revolutionized interpretation. Although calculation of sensitivities for general electromagnetic problems require numerous forward modelings, DC resistivity methods can enjoy computational efficiencies if sources and receivers occupy the same position, and previously intractable 3D inversion is now becoming available.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.19-27
• /
• 2005

The Sambo mine is located in Hae-je Myeon, Moo-an Gun, Chollanamdo, which consists of host gneiss and rhyolite possessing quartzite veins with other compositions such as gold, silver, and sublimated sulfur. The ore grade estimated from the core was 0.05～10.9g/t or less in gold and 0.05～389g/t or less in silver, indicating a partial mineralization. The purpose of this paper is to understand the subsurface structures and the distribution of mineralized bodies in the Sambo mine using a combined method of Schlumberger, Wenner, and Dipole-di-pole resistivity surveys on the surface and the resistivity tomography survey in boreholes. The result of three-dimensional resistivity inversion showed that the mineralized body is extended to 240m long in the N10°～20°E direction, with 30m wide and 80 m thick from the surface. The low resistivity zones (<1,000ohm-m) determined from the resistivity image were in good agreement with the mineralized bodies and weak zones identified from the logged cores.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.501-510
• /
• 2003

Several geophysical surveys(electrical resistivity, electromagnetic, seismic refraction, CPR) were conducted to primarily investigate the gallery and the geomembrane at an abandoned mine(Imcheon mine). The subsurface structure mapped from seismic refraction survey mainly consists of three velocity layers(>1000 m/s, 1000∼2000 m/s,＜2000 m/s). Top of the bedrock, whose velocities exceed 2000 m/s, appears to be at depth of 7.5∼10m. Higher resistivities (of ten thousands-hundred of thousands ohm-m) are interpreted to be associated with a open(cavities) gallery. The events at depth of approximately 0.5∼0.7m in GPR sections are probably caused by high-density-poly-ethylene geomembrane. Taking into consideration of the differences in the spatial resolution between georadar and electrical surveys, the events of geomembrane correspond to the top of the high resistivities at depth of about 2m. The segments, characterized with the higher conductivities in the electromagnetic data and the lower resistivities in the electrical resistivity data, are probably associated with surface water or tear zone of geomembrane.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.21-36
• /
• 1999

Recently resistivity survey is widely used for site investigations in the field of civil engineering. Since such application area requires accurate interpretation tools especially in the area of complicated geology and rough terrain topography, we developed a three-dimensional (3-D) resistivity inversion code, which can reconstruct real earth structures. Furthermore, the inversion code gives resolution-enhanced images by applying the ACB(Active Constraint Balancing) method. With the help of this inversion code, 3-D resistivity survey is now used as new techniques for site investigations in civil engineering problem. By imaging the 3-D resistivity distribution, we could get useful informations such as depth distribution of basement rock, distribution of weak zone, fractures and cavities which is crucial to civil engineers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.321-327
• /
• 2006

In this paper, when a H-polarized plane wave is incident on the grating consisting of uniform resistive strips, electromagnetic scattering is analyzed using the moment of methods (MoM). The current density of each resistive strip on a grounded dielectric plane is fixed by zero at both edges. To satisfy the condition at both ends of each resistive strip, the induced surface current density is expanded in a series of cosine and sine functions. The scattered electromagnetic fields are expanded in a series of floquet mode functions. The boundary conditions are applied to obtain the unknown current coefficients. According to the variation of the involving parameters such as strip width and spacing and angle of the incident field, numerical simulations are performed by applying the Fourier-Galerkin moment method. The numerical results of the normalized reflected power for resistive strips case for zero and several resistivities are obtained.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.310-310
• /
• 2020

자연하천에서 식생의 성장은 유속 및 수위 변화에 중요한 영향을 미치며, 따라서 식생으로 인한 흐름저항은 흐름과 유사이송 모델링을 위한 중요 매개 변수가 된다. 즉, 수치 모델을 활용함에 있어 식생의 흐름 저항을 정확하게 추정하는 것이 매우 중요하며, 보다 정확한 추정을 위해 실험 혹은 현장 데이터를 활용한 보정과정이 필수적으로 요구된다. 본 연구에서는 식생 패치를 포함한 인공 수로의 흐름 모의를 위해 실규모 실험 수로에서 측정된 유속 및 수위 데이터를 활용하여 모델보정을 수행하고자 한다. 이를 위해 공간 분포 별로 각기 다른 흐름 저항식의 적용이 가능하며, 식생 저항 공식을 포함하고 있는 Delft3D 모델을 활용하였다. 또한 실규모 수로에서의 유속 및 수위 데이터 수집을 위해 한국건설기술연구원 하천연구센터에서 실험을 수행하였다. 실험 구간의 길이는 약 120 m이고 하폭은 11 m이며, 국내 하천에서 보이는 식생패치의 유사한 형태를 재현하기 위해 하천 내 가장 많이 활착되어있는 버드나무와 유사한 형태의 인공식생을 제작하였다. 인공 식생은 지그재그로 배치되었으며, 식생의 전체 높이는 1.1 m이고, 각 패치 당 23그루의 인공 식생이 총 8개 패치에 식재되었다. 모의 조건은 상류단 유입 유량 2.805 ㎥/s, 하류단수위 98.764 m의 정류 조건을 적용하였다. 또한 식생 패치 구간에서의 흐름 저항 추정을 위해 Delft3D 모델 내에서 선택가능 한 Baptist의 비침수(Non-submerged)식을 적용하였으며, 항력계수 결정을 위해 1과 1.5를 적용하여 측정 수위와 비교하였다. Delft3D의 흐름 모의 결과, 항력계수 1.5를 적용했을 때, 측정 수위와 거의 일치하는 것으로 나타났으며, 항력계수 1.0을 적용했을 경우, 측정 수위에 비해 다소 낮게 모의되는 것으로 나타났다. 또한 항력계수 1.5인 경우 식생 패치 구간에서 평균 0.65 m/s의 유속이 발생하였다.

• Korean journal of applied entomology
• /
• v.22 no.3 s.56
• /
• pp.208-212
• /
• 1983

Sixteen recommended soybean cultivars in Korea were tested for resistance to Heterodera glycines. The nubmer of females which developed on roots of cultivars were fewer on 'Hwanggeum kong' and greater on 'Geumgangdaelib'. But there was no resistant cultivar to Heterodera glycines. Four field populations of Heterodera glycines tested for ability to reproduce on five host differentials. Geographical differentiations of H. glycines were newly founded in Korea. These were identlified to race 1 at Hwasun, race 5 at Yangsan and Suweon and Unknown race(or race C) at Seonsan.

• Journal of the Korean Geophysical Society
• /
• v.6 no.3
• /
• pp.179-188
• /
• 2003

The object of grounding of electrical facility is to protect human and machine damage from the power supply interruption high voltage by use of the accident current dissipating into the ground. Generally, it is not easy to make suitable ground design for inhomogeneous subsurface geology and the variability of accident current in magnitude and duration time. To make efficient ground, ground potential rise must be controlled in the way of overall lowering and evenness. This study shows the case of optimized ground design by use of subsurface resistivity structure from electrical soundings.

• Resources Recycling
• /
• v.17 no.5
• /
• pp.19-27
• /
• 2008

In this study, the porosity and electrical resistivity of the formed coke produced by sintering the mixture of domestic anthracite and phenolic resin were mainly investigated, when the effect of the amount of binder, the hydration temperature and time, the hardening temperature and time, sintering temperature and time, the particle size of anthracite, the grade of anthracite, and the mixing ratio of phenolic resin on the physical properties of the coke were studied. As a result, It was found that the electrical resistivity and porosity of the formed coke are varied in the range of $0.3\sim1.2\Omega{\cdot}cm$ of $10\sim30%$, respectively, in accordance with the variation of factors.

• Journal of Korean Society of societal Security
• /
• v.2 no.3
• /
• pp.39-46
• /
• 2009

A small loop-loop multi-frequency electromagnetic(EM) induction method is a useful technique to map a resistivity distribution efficiently and non-destructively. However, for quantitative interpretation and depth sounding, the quality of measured data is crucial. In this paper, we propose a bias correction of measured data by using background noise measurements to obtain reliable data, and propose an evaluation technique of apparent that can provide a resistivity image easily. We have performed small loop-loop EM measurements to detect water saturation in a man-made test site. The application of our proposed techniques to the measured data was successful.