• Industry Promotion Research
• /
• v.8 no.1
• /
• pp.11-22
• /
• 2023

This study proposes service content that helps people stay in the right posture in their daily lives to manage the pain of musculoskeletal diseases. Resistance factors and induction factors were analyzed through a survey of 143 people and Ethnography. Based on this, we propose an app service that helps practice the right posture by using EMG sensors and wearable devices. This study is meaningful in alleviating musculoskeletal pain and further improving the quality of life by helping to practice and maintain the right posture with service content based on self-objectification through user posture habit analysis.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.531-534
• /
• 1999

벡터제어기법은 유도전동기의 무부하 시험 및 구속시험 등을 통하여 구한 고정자 및 회전자 상수를 이용한 전동기의 수학적 모델을 기초로 하여 이루어진다. 따라서 유도전동기의 수학적 모델을 구성하는 고정자 및 회전자 상수의 정확성은 곧 벡터제어의 성능과도 직결된다. 하지만, 온도 상승 등의 영향으로 회전자 저항값은 정상치보다 최대 80∼100%까지 상승 할 수 있으며, 이는 벡터제어의 특성을 저하시키는 요인이 된다. 따라서, 본 연구에서는 회전자 저항을 이용하는 자속 PI제어부를 회전자 저항을 사용하지 않는 자속 퍼지제어부로 대체하고 측정한 3상 전류를 이용하여 회전자 저항값의 변화를 실시간으로 추정·보상하는 퍼지추론기를 구성하므로써 회전자 저항의 변화에도 최적의 효율 및 성능을 가지는 보완된 벡터 제어 기법을 개발하였다.

• Journal of the Korean Geophysical Society
• /
• v.2 no.3
• /
• pp.225-233
• /
• 1999

Electrical resistivity of a rock-sample is dependant on not only formation factor of rock itself but also many parameters such as fluid type, measuring device, temperature, water saturation, electrical contact between electrode and core section, induced polarization, and frequency of electric source. In this study, we attempt to verify various affecting factors in core resistivity measurements and to find a better environment for core resistivity measurement. Particularly great attention has been paid to understanding the effects of temperature, water saturation, contact condition between sample and electrodes, and frequency of electric source. Precise measurement of resistivity can be achieved by utilizing silver paste for better contacts, taping samples for constant moisture contents, and using time-series resistivity data.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.1
• /
• pp.31-38
• /
• 2019

In this study, amine derivatives and ion exchange resins were selected to actively control penetration ions ($SO{_4}^{2-}$, $Cl^-$) as the element technology of repair materials for concrete structures in drainage environments. Ions ($SO{_4}^{2-}$, $Cl^-$) adsorption performance and corrosion resistance of calcium hydroxide solution with amine derivative and ion exchange resin were confirmed by ion chromatography and potentiostat analysis. As a result of the experiment, it was confirmed that the amine derivative is excellent in the adsorption of chlorine ion and the ion exchange resin is excellent in the adsorption of sulfate ion. It has been confirmed that corrosion resistance can be increased by proper combination of two materials in the calcium hydroxide solution containing sulfate ion and chloride ion simulating sewage environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.493-502
• /
• 2016

This study examines how rock condition affects the variation of the chargeability and electrical resistivity of the rock. In the theoretical study, the relationship correlating chargeability with the variables affecting it is derived. A parametric study utilizing the derived relationship reveals that the size of narrow pores ($r_1$) is the most influential factor on chargeability, and the salinity of pore water ($C_0$) is the second. In the laboratory experiments, small scale rock fracturing zone is modelled using sand stone. Chargeability and resistivity are measured by changing the size of the joint aperture, the location of fractured zone and the existence of clay gouge and/or clay layer which shows lower chargeability than the sand stone layer in the multi-layered ground. Test results show that chargeability is controlled not by the rock fracturing condition but by the size of narrow pore ($r_1$) where each line of current flow passes through. Also, the chargeability decreases with increase of the pore water salinity ($C_0$). In conclusion, the ground condition can be identified more efficiently by measuring the induced polarization along with the electrical resistivity; identifying the existence of sea water, the layered ground and/or the fractured rock becomes more reliable.

• Journal of Life Science
• /
• v.33 no.1
• /
• pp.102-113
• /
• 2023

This review discusses the cellular and molecular mechanisms by which the endometrial estrogen and progesterone receptors regulate local estrogen production, expression of the specific estrogen receptors, progesterone resistance, inflammatory responses and the differentiation and survival of endometriotic cells in endometrial inflammation. The epigenetic aberrations of endometrial stromal cells play an important role in the pathogenesis and progression of endometriosis. In particular, differential methylation of the estrogen receptor genes changes in the stromal cells the dominancy of estrogen receptor from ERα into ERβ, and results in the abnormal estrogen responses including inflammation, progesterone resistance and the disturbance of retinoid synthesis. These stromal cells also stimulate local estrogen production in response to PGE2 and the SF-1 mediated induction of steroidogenic enzyme expression, and the increased estradiol then feeds back into the ERβ to repeat the vicious inflammatory cycle through the activation of COX-2. In addition, high levels of ERβ expression may also change the chromatin structure of endometrial mesenchymal stem cells, and together with the repeated menstrual cycles can induce formation of the endometriotic tissue. The cascade of these serial events then leads to cell adhesion, angiogenesis and survival of the differentiation-disregulated stromal cells through the action of inflammatory factors such as ERβ-mediated estrogen, TNF-α and TGF-β1. Therefore, understanding of the dynamic hormonal changes during the menstrual cycle and the corresponding signal transduction mechanisms of the related nuclear receptors in endometrium would provide new insights for treating inflammatory diseases such as the endometriosis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3610-3618
• /
• 2015

The congestion of railway vehicle and station shows up to 220%. Especially, transfer resistance of passenger increase rapidly by the collision of circulation. So increment of travel time, occurrence of safety accidents act as a factor that inhibits the utilization of urban railway station. In this paper, to improve traveling speed and comfort of urban rail passengers, urban transit passenger guidance system using congestion management model is proposed. The congestion management model that can mitigate a recurring/non-recurring congestion is constructed and the preliminary design of the system (middleware system, control system, guidance drive system) is carried out. Passenger Guidance System is configured by step for changing the external data into a form usable by the algorithm, step to perform the congestion management algorithm using the real-time data and historical data, step to control device based on the value that is calculated by congestion management algorithm, step to drive the device based on the information in the control system and circulation guidance devices. In the future, detail design will be performed based on the preliminary design. A prototype of the various devices according to the station structures and locations will be made. The control module of guidance device will be developed.

• The Korean Journal of Pesticide Science
• /
• v.10 no.1
• /
• pp.50-55
• /
• 2006

A field-resistant strain of the diamondback-moth(Plutella xylostella L.), collected from Chinese cabbage alpine farmland at Gangwon-do, Korea, was used for determination of the characteristics of resistance to chlorpyrifos using the activities of esterases and glutathione-S-transferase(GST), protein sequestration and AChE insenstivity. Although the activities of esterases extracted from resistant strain and susceptible strain were not significantly different, isozyme bands shown on the electrophoresis were different. GST activity from field resistant strain was 1.5-fold higher than that of susceptible. No differences were shown between resistant and susceptible ones in protein sequestration. The insensitivities of AChE to chlorpyrifos, however, extracted from susceptible strain was 460-fold higher than those of resistant. These results indicated that the insensitivity of AChE is the major factor for developing the resistance and activities of GST might be a minor factor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.130-131
• /
• 2011

박막의 제조는 많은 연구의 가장 기초가 되는 시편을 만드는 과정으로 현대의 과학기술에서 매우 중요한 공정 중의 하나이다. 그러나 이러한 박막의 제조는 제조하는 사람의 숙련도나 장치에 의존하며 경우에 따라서는 원하는 특성의 박막을 제조하는 것이 매우 어려운 작업이 되기도 한다. 따라서 경험이 없는 연구자의 경우는 때때로 까다로움과 번거로움을 느끼게 되며, 안정된 공정을 찾기까지 많은 시간을 소비 하게 된다. 특히 부적절한 증발방법의 선정에 따른 실험 결과는 경제적인 손실을 초래할 뿐만 아니라 실험하는 사람을 좌절시키는 가장 큰 요인이 되어왔다. 진공증착에 의한 박막의 제조는 증발법과 스퍼터링, 이온플레이팅 등의 방법이 있으며 이중 증발을 이용한 박막의 제조에는 저항가열 증발, 전자빔 가열 증발, 유도가열 증발 등의 방법으로 구분하고 있다. 저항가열 증발원은 가격이 저렴하다는 장점은 있으나 증발원이 손쉽게 파손되거나 증발량이 일정하지 않아 박막의 정밀 제어가 어려울 뿐만 아니라 때에 따라서는 1 ${\mu}m$ 이상의 후막 형성에도 어려움이 있는 등 많은 제약이 있다. 따라서 적절한 증발원의 선정이 실험의 효율성을 좌우하는 경우가 많다. 적절한 증발원의 선정과 효율적인 실험을 위해 증발원 제조회사에서는 증발원의 선정과 증발 조건과 관련된 자료를 카탈로그 형태로 발행하고 있다. 그러나 그러한 자료만으로는 객관적인 정보를 얻기에 충분하지 못한 경우가 많으며, 어떤 경우에는 저자 등의 경험과 일치하지 않는 정보도 포함하고 있었다. 전자빔 증발원은 냉각이 되는 Crucible에 물질을 담고 고전압의 전자빔으로 물질을 가열시켜 증발시키는 증발원으로 1960년대 이후 박막 제조 실험에 이용되기 시작하였다. 전자빔은 고순도의 피막 제조가 가능하고 증발물질의 교체가 쉬우며 고속 증발이 가능함은 물론 다층막의 제조가 용이하고 증발물질의 제조비용이 저렴하다는 장점이 있다. 이러한 장점 때문에 1970년대 이후에는 전자빔을 이용한 박막제조가 폭 넓게 이루어졌고 이때를 즈음하여 전자빔을 이용한 물질의 증발 특성이 논문으로 발표되기도 하였다. 본 연구에서는 증발에 관한 저자들의 경험을 바탕으로 저항가열과 전자빔을 이용하여 증발실험을 진행한 물질계를 중심으로 각 물질의 증발특성과 가장 효율적인 Liner 등에 대해 기술하였다. 특히, 각종 물질의 증발 특성을 체계화함은 물론 효율적인 증발 방법을 객관적인 Data와 함께 제공하여 효과적인 박막 제조 실험에 도움이 되고자 하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.688-697
• /
• 2014

In this study, electrode bonding technology needed for high density of rechargeable battery is studied, which is recently researched for electric vehicle, the small leisure vessel. For the alternative overcoming the limit of stacking amount able to be stacked by conventional ultrasonic welding, the low temperature bonding method, eligible for minimum of degeneration of chemical activator on the electrode surface which is generated by thermal effect as well as the increase of conductivity and tension strength caused by electrode bonding using filler metal, not using conventional direct heating on the electrode material method, is studied. Specifically to say, recently used more generally the ultrasonic welding and spot welding method are not usable for satisfying stable electric conductivity and bonding strength when much electrode is stacking bonded. If the electrical power is unreasonably increased for the welding, due to the effect of welding temperature, deformation of electrode and activating material degeneration are caused, and after the last packaging, decline of electrical output and generating heat cause to reduce stability of battery. Therefore, in this study, induction heating system bonding method using high frequency heating and differentiated electrode method using filler metal pre-treatment of hot dipping are introduced.