• 전기의세계
• /
• v.28 no.4
• /
• pp.3-9
• /
• 1979

대기오염은 인간의 건강에 중요한 영향을 미칠뿐 아니라 공업적으로도 많은 해를 초래하고 있다. 그중 한가지 예가 접촉부품에 대한 것을 열거할 수 있다. 일반적으로 모든 금속재 부품에 대해서도 같은 영향을 주나 접촉부품에서는 접촉저항 특성을 중요시하기 때문에 대기오염의 영향은 직접적으로 민감하게 미친다고 볼 수 있다. 접촉부품은 전기회로를 개폐, 절환 또는 이탈시키는 작용을 하며, 크게 나누어 개폐, 정지및 접동등 세가지 형식으로 분류할 수 있다. 이러한 견지에서 대부분의 전자장치및 전기기기에는 접촉부품이 어떠한 형태로서든지 사용하게 되며, 또한 중요한 기능과 역할을 담당하고 있음을 알 수 있다. 이러한 접촉부품에서 접점의 성능은 일반적으로 접촉저항특성, 융착특성 및 소모전이 특성 등 여러 특성으로 요약할 수 있으며 특히 소형화의 경향이 있는 접촉부에 대해서는 접촉저항특성이 중요한 요소가 된다. 일반용의 금속과 같은 과정으로 접촉부금속도 주위 분위기의 기체와 반응을 하여 접촉면에 여러 오염피막을 발생시킨다. 이러한 오염피막은 일반적으로 높은 전기저항을 표시하기 때문에 접촉저항특성을 현저하게 나쁘게 할 것이다. 이러한 입장에서 정밀하고 신뢰성 있어야 할 접촉부품이 대기오염으로 인하여 전기적성질이 저하되어 예기치 못하였든 사고발생을 추정해야 할 시기가 우리나라에도 도래한 것 같으며 공업단지내의 공장에 종사하는 기술자는 적어도 이러한 문제를 고려해야 하겠기애 몇가지 사항에 대하여 간단히 기술하고자 한다.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.168-173
• /
• 2002

Electrostatic discharge characteristics were studied by connecting human body model (HBM) with tunneling magnetoresistance (TMR) device in this research. TMR samples were converted into electrical equivalent circuit with HBM and it was simulated utilizing PSPICE. Discharge characteristics were observed by changing the component values of the junction model in this equivalent circuit. The results show that resistance and capacitance of the TMR junction were determinative components that dominate the sensitivity of the electrostatic discharge(ESD). Reducing the resistance oi the junction area and lead line is more profitable to increase the recording density rather than increasing the capacitance to improve the endurance for ESD events. Endurance at DC state was performed by checking breakdown and failure voltages for applied DC voltage. HBM voltage that a TMR device could endure was estimated when the DC failure voltage was regarded as the HBM failure voltage.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.83-87
• /
• 2023

In the field of electronics and semiconductor technology, innovative semiconductor material research to replace Si is actively ongoing. However, while research on alternative materials is underway, there is a significant lack of studies regarding the relationship between 2D materials used as channels in transistors, especially parasitic resistance, and RF (radio frequency) applications. This study systematically analyzes the impact on electrical performance with a focus on various transistor structures to address this gap. The research results confirm that access resistance and contact resistance act as major factors contributing to the degradation of semiconductor device performance, particularly when highly scaled down. As the demand for high-frequency RF components continues to grow, establishing guidelines for optimizing component structures and elements to achieve desired RF performance is crucial. This study aims to contribute to this goal by providing structural guidelines that can aid in the design and development of next-generation RF transistors using 2D materials as channels.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2213_2214
• /
• 2009

본 논문에서는 트리거와 리미팅 요소를 갖는 초전도 한류기의 전류제한 특성을 분석하였다. 일반적으로 저항형 초전도한류기는 트리거동작과 리미팅동작이 초전도한류기 자체에서 모두 이루어지게 된다. 초전도 한류기의 구성요소를 트리거동작과 리미팅동작을 수행하는 요소로 분리시켜 보다 효율적으로 고장전류를 감지하고 제한할 수 있음을 등가회로와 모의실험을 통해 확인하였다.

• Geophysics and Geophysical Exploration
• /
• v.9 no.4
• /
• pp.291-298
• /
• 2006

Resistivity method is a practical and effective geophysical technique to detect leakage zones in embankment dams. Generally, resistivity survey conducted along the crest assumes that the embankment dam has a 2D structure. However, the 3D topography of embankments distorts significantly resistivity data measured on anywhere of the dam. In this study, we analyse the influence from 3D effects created by specific dam geometry through the 3D finite element modeling technique. We compared 3D effects when resistivity surveys are carried out on the upstream slope, left edge of the crest, center of the crest, right edge of the crest and downstream slope. We ensure that 3D effect is greatly different according to the location of the survey line and data obtained on the downstream slope are most greatly influenced by 3D dam geometry. Also, resistivity data are more influenced by the electrical resistivity of materials constituting reservoir than 3D effects due to specific dam geometry. Furthermore, using resistivity data synthesized with 3D modeling program for an embankment dam model with leakage zone, we analyse the possibility of leakages detection from 2D resistivity surveys performed along the embankment dam.

• Proceedings of the KWS Conference
• /
• 1993.10a
• /
• pp.84-87
• /
• 1993

• The Journal of Society for e-Business Studies
• /
• v.17 no.4
• /
• pp.95-115
• /
• 2012

The e-Book market has rapidly grown as an innovative product which is mixed its traditional and technological characteristics. However, decreasing user resistance to the e-Book is very important to continually keeping up its market growth. Previous studies for user resistance have been studied as a negative barrier for various innovative products with importance of user resistance. Nevertheless, the factors for user' resistance to the e-Book field have not been found out considering both perceived value and switching cost. Especially, both innovative technology and user specifics should be considered when explaining user resistance to adopting e-Books. Thus, the purpose of this study is to understand the process for user resistance to the e-book and find out its antecedents with perceived value and switching cost at the same time. As a result, it appeared that triability, uncertainty and complexity affected perceived value and switching cost. The user-based antecedents like social norm and perceived value increased the effect of self-efficacy. Also, self-efficacy and perceived value decreased user resistance whereas switching cost increase user resistance to the e-Book perspective.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.3
• /
• pp.219-226
• /
• 2012

Columns are the key elements supporting load in structure. Column failure causes the structure to collapse. It is important to evaluate residual strength for damaged columns under blast load for preventing progressive collapse. In this paper, columns were investigated to compare the blast resistance on the change of the number of steel bars within the range of reinforcement ratio. And this study was carried out 4 different analytical models to evaluate effects of aspect ratio. The results indicate that the vertical strain was unaffected by the number of steel bars and aspect ratio. As the number of steel bars facing blast load increase, the blast resisting capacity of the columns was improved in the lateral strain. Also, the analysis results showed that a large moment of inertia of area, as compared to a small one would be superior in residual strength as well as force of restitution.

• Information Systems Review
• /
• v.6 no.2
• /
• pp.25-45
• /
• 2004

As information systems are implemented in business organizations, users and other stakeholders are known to resist changes incurred by information systems being implemented. For successful implementation, it is critical to manage changes overcoming resistance. Through literature review and expert panel, this study derives four underlying dimensions of resistance (anxiety, suspicion, imposition and self-centeredness) and five categories of change management activities (vision, leadership, communications, education and training, and organizational culture). A Survey was designed to measure the relationship between these dimensions and activities, and administered among information systems consultants. It is found that activities related to vision and leadership is underpinning other change management activities. Anxiety and imposition can be mitigated by education and training while suspicion is to be overcome by communications and self-centeredness by activities related to cultural changes. Implications are discussed and further researches are suggested.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.135-143
• /
• 2007

The pavement system constructed by tieing a number of precast concrete slabs employing prestressing techniques is called the precast prestressed concrete pavement. The behavior of this type of pavement system under post-tensioning was analyzed using a finite element model. First, the optimal number of anchors was determined by investigating the distribution of compressive stresses in the pavement system due to post-tensioning. Then, the effects of the parameters such as the horizontal resistance of underlying layers, the pavement length, the slab thickness, and the bearing area of the anchorage on the distribution of compressive stresses were analyzed. The horizontal resistance of underlying layers induced the loss of compressive stresses, and the loss increased in the middle of the pavement. As the pavement length increased or the slab thickness decreased, the stress loss due to the horizontal resistance of underlying layers became larger. However, the bearing area of the anchorage where the compressive forces were applied did not much affect the distribution of compressive stresses.