• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.54-60
• /
• 2001

This study is to investigate the mechanical properties and the fatigue crack propagation of fire resistance steel for frame structure as the chemical composition was changed by addition of N, B and rolled end temperature was varied. We used two kinds of specimen, the one is parallel and the other is perpendicular to the rolling directions. As rolled end temperature increased, volume fraction of ferrite and pearlite decreased, but volume fraction of baintie and grain size increased. Micro-hardness decreased as rolled end temperature increased, but tensile and yield strength increased. Volume fraction of ferrite and pearlite decreased by addition of N. But volume fraction of bainite, tensile and yield strength increased. Microstructure was changed to martensite by addition of B, and tensile and yield strength increased. Fatigue life of TL direction specimen was shorter than that of LT direction specimen. There was no significant effect to fatigue crack propagation rate by addition of N and changing rolling condition, but fatigue life was increased by addition of B.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.4
• /
• pp.212-219
• /
• 2001

The fatigue test was carried out to evaluate the fatigue characteristics of fire resistance steel for frame structure and heat affected zone (HAZ) by the one side Gas Metal Arc Welding (GMAW). In this paper, the fatigue crack growth behavior was investigated with the compact tension specimen of base metal and the HAZ according to chemical composition and rolling end temperature, respectively. And the acoustic emission signals obtained from the fatigue test were analyzed by the time-frequency analysis method as a nondestructive evaluation. Main results obtained are summarized as follows; The hardness was appeared softening phenomenon that weld metal and HAZ are lower than that of base metal. Fatigue life of welded specimen was longer than that of base metal. m was 3~4.5 in base metal and 3.8~5.8 in HAZ. The main frequency range of acoustic emission signal analyzed from time-frequency method is different with the range by noise and crack. Also, it could be classified that it was also generated by fracture mechanics of dimple, inclusion etc.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04a
• /
• pp.625-628
• /
• 2002

디지틸워터마킹은 디지털콘텐츠의 저작권보호 솔루션으로서 현재 주로 이미지, 오디오, 비디오, 텍스트 등을 대상으로 연구되고 있다. 컴퓨터 하드웨어, 네트워크, 그리고, 응용 소프트웨어의 빠른 발전과 함께 국가 차원의 초고속 통신망의 인프라 구축에 힘입어, 3차원 폴리곤과 곡선 및 곡면에 대한 디지털워터마킹에 관심이 높아지고 있다. 본 논문에서는 유리 베지에곡선에 대한 디지털워터마킹에 대한 하나의 방법을 제시한다. 기존의 베지에곡선의 차수를 증가시키는 일반적인 방법이 아닌 유리항의 분모와 분자에 공통의 다항식을 곱하여 차수를 증가시킨다. 이때 공통으로 칠하는 다항식의 관들의 복비(cross ratio) 값에 우리가 숨기고자하는 마크를 삽입하고, 추출해내는 방법을 제시한다. 본 논문에서 제시된 알고리듬은 워터마크를 삽입하는 과정에서 곡선의 형태를 전혀 변화시키지 않는 형태 유지성(shape preserving property)을 갖는다. 또한. 본 알고리듬의 다른 중요한 특징은 곡선이 CAD 시스템에 의해 이용되는 과정에서 흔히 일어나는 재매개화 방법 중 뫼비우스 변환을 이용한 재매개화에 저항성이 있는 알고리듬이라는 것이다. 마지막으로 본 연구에서 제시한 방범에 의한 예제의 결과를 보여준다.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.3
• /
• pp.331-339
• /
• 2003

The study discussed in this paper investigated the material characteristics for the Thermo-Mechanical Control Process(TMCP) plates, which are controlled by several factors such as rolling, cold-stripping, cooling rate, and fixed carbon quantity. The suitability of thick TMCP steel plates as structural steel was also estimated through several experiments and with the us of a statistical method to analyze mill certificate sheets provided by the manufacturer. The results of this study are as follows: the TMCP steel plates showed stable values of the composition parameter ($P_cm$) and the carbon equivalents ($C_eq$ ) with satisfied yield strength, ultimate strength, and low-yield ratio.