• 전기의세계
• /
• v.34 no.4
• /
• pp.213-219
• /
• 1985

2중층 압전변압기를 공진주파수로 동작시키면 부하저항이 클수록 전압비가 커지고 부하저항의 변동에 대하여도 안정되며, 특히 무부하시의 전압비는 전기기계결합계수의 제곱과 기계적 품질계수의 곱에 비례하고, 또 그 크기나 형상에는 관계없으므로 설계시 제약이 적은 장점이 있다. 한편 이 변압기의 공진주파수는 압전진동자의 직력공지주파수에 크게 의존하고, 진동자의 고정용량, 전기기계결합계수, 절연판의 정전용량 등에 의해서도 영향을 받으며, 부하저항이 큰 경우의 공진주파수는 부하저항의 변동에 대하여 안정됨을 알 수 있다. 따라서 이러한 2중층 압전변압기를 이용하여 높은 전압비를 얻으려면, 변압기를 전기기계 결합계수와 기계적 품질계수가 큰 압접진동자로 제작하고, 또 그 변압기를 저항이 큰 부하에서 공진주파수로 동작시키는 것이 바람직하다.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.139-146
• /
• 2007

The objective of the present study is to provide statistical resistance statistics for steel-concrete composite plate girder sections under positive and negative moments. Statistical properties on yield strength, tensile strength, elongation, and fracture toughness of domestic structural steel products, gathered from an analysis of over 16,000 samples, were evaluated. Using the steel samples for the plate girder, the bias factor and the coefficient of variation of the ultimate flexural resistance for representative composite plate girder sections under positive and negative flexures were presented. In calculating the ultimate flexural resistance of the composite section, the moment curvature relationships were developed using the incremental load approach considering material nonlinearity for the steel girder. The predicted statistics can be used in the future for the efficient calibration of LRFD code.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1894-1899
• /
• 2008

하천 내의 자생수목군에 의한 자연적인 흐름저항의 증가, 식재를 통한 인위적인 흐름저항의 증가, 교각 등의 구조물로 인한 흐름저항을 배수계산에 반영하기 위하여 일반적으로 Manning n값이 사용된다. 그러나 흐름 장애물로 인하여 증가된 Manning n값의 선정은 Chow(1950) 등이 제시한 도표를 활용하는 방법과 같이 공학적 판단을 요하는 작업이다. 그러므로 객관적으로 흐름저항을 산정할 수 있는 기법의 개발이 필요하며, 이를 위한 기초연구로 본 연구에서는 개수로 내 장애물의 항력계수 특성에 대하여 분석하고자 한다. 일반적으로 항력계수는 유체의 유속에 따라 변화되므로, Reynolds 수 또는 Froude 수에 따라 변화되는 것으로 알려져 있다. 그러나 그 범위가 연구자에 따라 상이하여 이를 정량화 할 필요가 있으며, 본 연구에서는 실험자료로부터 개수로 내 장애물의 항력계수 특성을 분석하고, 개수로에서 일반적으로 발생할 수 있는 Reynolds 수 또는 Froude 수 범위에서 기존 연구결과들을 비교분석하여 항력계수의 범위를 정량적으로 정립하고자 한다. 일반적인 상류 흐름조건에서 평균 항력계수($C_D$)는 1.11로 계산되었고, Froude 수의 증가에 따라 항력계수의 변동성이 점차 증가하였으며, 이러한 결과로부터 개수로 내 장애물로 인한 흐름저항을 반영하기 위하여 Manning n값으로 산정된 결과는 평균 0.01의 편차를 보이는 것으로 분석되었다.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.2
• /
• pp.43-55
• /
• 2012

In this study, the resistance bias factors are calculated to determine the resistance factor of Gravel Compaction Piles which is one of the soft ground improvement methods. In order to calculate resistance bias factors for gravel compaction piles, two ultimate bearing capacities were analyzed. One is the ultimate bearing capacity in 2.54 cm settlement measured using data of the field loading test on 41 piles and the other is the ultimate bearing capacity calculated using the seven equations concerning bulging failure. The results of analysis show that the probability density function of the calculated ultimate bearing capacities has a lognormal distribution. Resistance bias factor and the coefficient of variation for Greenwood equation are 0.91 and 0.38, respectively, and for those of Hughes & Withers are 1.19 and 0.39. The two equations are suitable for calculating resistance factors for LRFD of soil improvement using gravel compaction piles.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.8
• /
• pp.25-37
• /
• 2014

In load and resistance factor design (LRFD) method, resistance factors are typically calibrated using resistance bias factors obtained from either only the data within ${\pm}2{\sigma}$ or the data except the tail values of an assumed probability distribution to increase the reliability of the database. However, the data selection approach has a shortcoming that any low-quality data inadvertently included in the database may not be removed. In this study, a data quality evaluation method, developed based on the quality of static load test results, the engineering characteristics of in-situ soil, and the dimension of aggregate piers, is proposed for use in constructing database. For the evaluation of the method, a total 65 static load test results collected from various literatures, including static load test reports, were analyzed. Depending on the quality of the database, the comparison between bias factors, coefficients of variation, and resistance factors showed that uncertainty in estimating bias factors can be reduced by using the proposed data quality evaluation method when constructing database.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.6
• /
• pp.17-26
• /
• 2019

In this study, the statistical characteristics of the resistance bias factors were analyzed using a high-quality field load test database, and the total resistance bias factors were estimated considering the soil uncertainty and construction errors for the application of the limit state design of aggregate pier foundation. The MLR model by Bong and Kim (2017), which has a higher prediction performance than the previous models was used for estimating the resistance bias factors, and its suitability was evaluated. The chi-square goodness of fit test was performed to estimate the probability distribution of the resistance bias factors, and the normal distribution was found to be most suitable. The total variability in the nominal resistance was estimated including the uncertainty of undrained shear strength and construction errors that can occur during the aggregate pier construction. Finally, the probability distribution of the total resistance bias factors is shown to follow a log-normal distribution. The parameters of the probability distribution according to the coefficient of variation of total resistance bias factors were estimated by Monte Carlo simulation, and their regression equations were proposed for simple application.

• Land and Housing Review
• /
• v.12 no.3
• /
• pp.87-96
• /
• 2021

Korea has begun to use the Helical pile prevalent in Europe. Korea hasn't still set up the standard design criteria on Helical pile due to the lack of relevant researches. In this regard, this study carried out static and dynamic load tests on Helical pile and then performed reliability analysis including the previous research data. The results present that Road bridge design standard design criteia for pre-boring pile with regard to Modified Davisson method showed good reliability and consistency because Resistance bias factor of this design criteria approached '1.0' and Design C.O.V. showed 'low' level.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.539-546
• /
• 2006

The reliability analysis of simply-supported composite plate girder and box girder bridges under positive flexure is performed. The bridges are designed based on the AASHTO-LRFD specification. A performance function for flexural failure is expressed as a function of such random variables as flexural resistance of composite section and design moments due to permanent load and live load. For the flexural resistance, the statistical parameters obtained by analyzing over 16,000 samples of domestic structural steel products are used. Several different values of statistical parameters with the bias factor in the range of 0.95-1.05 and the coefficient of variation in the range of 0.15-0.25 are used for the live-load moment. Due to the lack of available domestic measured data on the dead load moment, the same values of statistical properties used in the calibration of AASHTO-LRFD are applied. The reliability indices for the composite plate girder and box girder bridges with various span lengths are calculated by applying the Rackwitz-Fiessler technique.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4A
• /
• pp.323-329
• /
• 2011

Most current design codes of concrete structures adopt the partial safety factor format to assure the proper safety margin or reliability against various limit states as a practical design tool. The safety factors, load and resistance factors and so on, are determined based on the theory of structural reliability, which takes into account the statistical uncertainties of both loads and resistances. The establishment of statistical models for load and resistance should be preceded the application of reliability theory. In this paper, especially the influence of the statistical variations of resistance models, which are described in terms of strength of concrete, strength of reinforcements and sectional dimensions and so on, are examined and the probabilistic models for resistance of reinforced concrete members were developed. The statistical data were collected on local tests and experiments in Korea and the Monte Carlo simulation (MCS) technique was used. The results of this paper may be useful and valuable in calibration of design code in this country.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.7
• /
• pp.366-372
• /
• 2017

The objective of this study was to characterize Waveguide-Blow-Cutoff (WBC) array for Electromagnetic Pulse (EMP) shield in air duct or water pipe, the typical pathway of pulse in indoor space with critical electronic device. A numerical investigation with three different WBC designs (circular, rectangular, and hexagonal or honeycomb) was conducted to satisfy recommended shielding effectiveness (SE) levels from 80 dB to 140 dB. Pressure drop between upstream and downstream of EMP shields based on WBC arrays was also investigated to understand air flow feature in air duct of HVAC system. Results showed that honeycomb geometry outperformed other shapes in terms of reducing the depth of EMP shield, thus providing better air flow in duct path with lower local loss coefficient in HVAC system under SE requirements.