• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.3
• /
• pp.193-199
• /
• 2002

Structral crack of RC structure generally occurs when the tension stress by applied load is larger than tension resistance of concrete, and it means deterioration of structure and the decrease of load resistance. Because structural crack of structure can occur critical damage to structure occasionally, the research on crack detection algorithm of RC structure is needed for assurance of structural safety and effective maintenance of structure. In this paper, we executed the laboratory test on measuring strain of RC beam's tension and compression zone, using strain gauge which is widely used on strain measurement of civil structure. By using measured strain, we analyzed strain change, elastic modulus change, and neutral axis change to detect crack of RC beam. As a result, we proposed the simple and effective crack detection algorithm using trends of neutral axis position change.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.135-144
• /
• 2009

The purpose of this study is to develop a simple and rational crack evaluation system using Marshall tester. Fracture energy were used as a parameter to evaluate the crack resistance of asphalt mixtures. Marshall tester basically measures the vertical deformation obtained from the linear variable differential transformer(LVDT) attached on the specimen's exterior, which can cause a measurement error due to the local deformation near the loading head. Therefore, the validity of the measurement system of Marshall tester should be tested to use it in calculation of fracture energy. Two types of indirect tensile strength tests were performed using four types of asphalt mixtures at two temperature conditions. From the tests, it was shown that local deformation near the loading head had not occurred before a specimen was fractured, so that it did not cause the measurement error of fracture energy. And also from the statistic analysis, the coefficient of variation of vertical deformation measurements obtained on specimen's exterior is less than 15%. Thus, vertical deformation measurements obtained on the specimen's exterior can be used in crack evaluation system using Marshall tester.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.119-126
• /
• 2005

Electrical resistance tomography(ERT) maps resistivity values of the soil subsurface and characterizes buried objects. The characterization includes location, size and resistivity of buried objects. In this paper, Gauss-Newton, truncated least squares(TLS) and simultaneous iterative reconstruction technique(SIRT) methods are presented for the solution of the ERT image reconstruction. Computer simulations show that the spatial resolution of the reconstructed images by the TLS approach is improved as compared to those obtained by the Gauss-Newton and SIRT method.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.28.3-28.3
• /
• 2010

위성이 궤도를 운용함에 있어서 원으로 운용되는 저궤도(LEO)에서는 대기저항(Drag)에 의한 섭동 영향이 가장 크게 미친다. 이 연구에서는 대기저항 섭동에 의해 감소되는 위성의 고도를 전기추력기를 이용하여 고도를 유지할 때 이를 해석적인 측면에 대해 살펴보고 지구 관측 위성에서 많이 쓰이는 태양 동기 궤도(SSO)에 적용하여 궤도를 유지하는 방법에 대해 알아보았다. 태양활동에 의한 대기의 밀도변화를 John kennewell의 모델을 통해 예측하여 대기저항에 의해 감소되는 고도량을 구하고 위성에서 추력(thrust)을 줄 때는 Gaussian Variation of Parameters식을 이용하여 해석적인 방법으로 궤도 장반경의 증가량을 구하였다. 위성에 추력을 줄때 이심률이 증가하게 되는 문제는 구속조건으로 이심률 값의 최대 허용치를 정하여 증가하는 것을 방지하도록 하였다. 또한 $J_2$ 섭동에 의해 가장 영향을 받는 승교점(Ascending Node)과 추력에 의해 변화할 수 있는 근지점(Perigee)을 살펴보고 궤도 유지를 위한 적절한 추력 방향을 구하였다. 각각의 궤도 요소의 변화를 살펴보고 일반적인 태양 동기 궤도 위성의 제원을 이용하여 궤도 유지에 적용하였다. 저궤도 위성의 궤도 유지에 대한 복잡한 수치적인 방법으로 궤도요소의 변화를 정확하게 구하지만 해석적인 방법으로도 위성의 궤도 유지를 위한 정보를 얻을 수 있었다. 이를 저궤도 위성의 궤도 운용과 변화 예측에 적용할 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.181-191
• /
• 2016

This study examined the effects of exercise intensity and type on insulin resistance, cardiovascular disease risk factors, and exercise time. Obese thirty-two subjects (>body fat 30%) were randomly assigned one of four experimental groups: VO2 max 50% aerobic exercise group (MAE, n=8), VO2 max 80% aerobic exercise group (VAE, n=8), VO2 max 50% + resistance exercise group (MARE, n=8), and VO2 max 80% + resistance exercise group (VARE, n=8). Body fat significantly decreased in all groups and insulin resistance decreased significantly in MARE and VARE (p<.05 & p<.01) after exercise. CRP and IL-6 were slightly reduced after exercise, although these did not reach statistical significance, whereas the IL-6 level of the VAE group decreased significantly (p<.05). TNF-${\alpha}$ significantly decreased in the MAE group (p<.05) but significantly increased in the VARE group after exercise (p<.05). For exercise time, higher intensity exercise groups were significantly less than the lower intensity exercise groups (p<.001). These results suggest that body fat is affected by all kinds of exercise intensity and type while CRP is not. Insulin resistance and TNF-${\alpha}$ were affected by exercise type, whereas IL-6, TNF-${\alpha}$, and exercise time were affected by exercise intensity.

• Composites Research
• /
• v.33 no.4
• /
• pp.228-233
• /
• 2020

In this paper, a single lap shear test was performed using a glass fiber reinforced composite material (GFRC). Pencil lead drawn paper sensor (PLDPS) was applied for single lap shear test being performed. Bisphenol-A epoxy and amine hardener were used as adhesives combining with composite materials. To make a difference in adhesive properties, the adhesive was cured under different conditions. PLDPS was made of a 4B pencil on A4 paper. Because graphite in a pencil was an electrically conductive substance, electric resistance (ER) could be measured. A change in ER was observed by a position where a PLDPS was attached to single lap shear specimens. It was confirmed that the change in ER was different depending on two attached positions and was observed by lap shear strain as well. In case the lap shear strain was large, the change in ER of PLDPS was high. This was because the larger the extension of the adhesive part, the larger the degree of bending of the specimen and thus the larger the distance change between two electrodes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.44-48
• /
• 1993

산업현장에서부터 실생활용품에 이르기까지 각종판재를 소재로하여 제작하는 가공품은 종류나 수가 매우 많다고 할수 있다. 이러한 제품들을 제작 하기 위해 여러단계의 성형 공정을 거치게 되며 원만한 성형공정 을 수행하기 위한 적절한 판재성형 제어방법으로써 다이곡률 반경의 변화나 블랭크홀딩가압정도의 부분적 변화로 드로잉률을 향상시키는 방법도 있으나 이보다 판재의 성형공정 제어방법에서 공구사이 상하에 비드 를 설치하여 판재를 성형할 경우 성형공정후 제품의 두께 분포가 비교적 균일해지고 드로잉의 마찰저항을 부분적으로 증가시키며 판재성형중 미끄럼 저항의 균형을 이루어 성형시킬 판소재가 절감도며 또한 성형중 주름을 억재하여 드로잉률을 향상시킨다. 다른 방법에 비해 비드는 설차가 간단해서 적절한 형상의 bead set을 선정하여 산업현장에서 실제 사용하고 있으며 또한 소재가 비드를 통과한후 탄성역에서 소성역으로 전환되기에 성형공정 이후 스프링백 현상으로인한 제품형상의 치수가 변하는 현상을 방지하는 효과도 기대할수 있다. 따라서 본 연구에서는 자동차용판재인 아연도금피막 강판으로 실험한 결과와 비드 이론식을 고찰해 보고자 한다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.431-432
• /
• 2009

This study was performed to verify the impact resistance of concrete using coal ash and fiber new materials. As the results of study, the impact resistance of concrete decreased as the mixing ratio of coal ash increased. When the fiber new materials(GF, HPSF) were mixed to the concrete, its resistance was increased.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.5
• /
• pp.57-65
• /
• 1996

초고속 정전유도형 정전전동기의 개발의 위한 기초연구로서 회전자 물질의 표면저항률, 비유전율 및 전하완하시정수의 변화에 따른 회전자의 회전속도특성을 조사하였다. 회전자표층물질의 비유전율 및 표면저항률은 클수록 회전자의 회전속도는 증가하였으며, 또한 이 두 요소를 곱한 회전지표면에 유도된 전하의 완화시정수가 클수록 회전속도는 증가하였다. 한편 회전자표층물질로서 도전성물질(Ti)을 폴리프로필렌 위에 불연속적으로, 즉 띠의 모양으로 증착한 시료를 사용하여 띠의 폭 및 경사각의 변화에 따른 회전자의 회전속도특성 및 토크 특성을 조사하였다. 이 경우 띠의 폭이 적어질수록 회전자의 회전수는 지수함수적으로 증가하였으며, 등간격으로 세분화한 것을 회전자의 축에 대해서 회전방향으로 경사각$\theta$만큼 기울였을 때 $\theta$=60。 및 150。일 때 회전자의 회전속도가 가장 큰 것으로 나타났으며, 특히 경사각 $\theta$=0。일때에 비해서 약 125[%]정도 높은 회전속도를 보였다. 최대토크 및 최대출력은 각각 {{{{25$\times$ { 10}^{ -6} [Nm]}}}}및 11.5[mW]이었다.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.279-284
• /
• 2000

In order to analysis the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to high temperature and water. Then the degradation process was evaluated by comparing contact angle, surface potential decay, and surface resistivity. For the change of wettability, the contact angle of thermal-treated specimen with the high temperature of $200^{\circ}C$ increased. But that of water-treated specimen decreased. The characteristic of surface potential decay shows the tendency of the remarkable decrease on water-treated specimens, but increase on thermal-treated specimen compared with untreated one. Also, for the surface resistivity, it shows the same trend compared with the change of contact angle.