• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.572-573
• /
• 2010

This paper performed the basic study for fabricating the low level laser therapy apparatus, and one of the goals of this paper was to make this apparatus used handily. The equipment was fabricated using the 655nm laser diode and microcontroller unit and designed to enable us to control light irradiation time, and reservation.. In case of cell proliferation experiment, each experiment was performed to irradiation group and non-irradiation group for bome marrow cell. MTT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.2
• /
• pp.117-122
• /
• 2016

Purpose: Gingival whitening is one of dental treatment purposes which is close to treating aesthetic disorders. Initial gingival whitening treatment was done by dermabrasion using a high power Diode Laser. However, this treatment method cannot be free from any infection or pain after the treatment. Therefore, we have decided to progress gingival whitening treatment using a low power LED laser. Materials and Methods: The laser was irradiated on pork meat then the safety of output power, temperature change and skin denaturalization was measured. Bison 365 nm LED laser was irradiated on oral mucosal pigment of a 15 - 20 kg beagle for 15 min for 1 - 2 weeks, one or two times each. Any pigment loss was checked through Hematoxyline-Eosin staining. Results: The melanin pigments at the area of 365 nm LED Laser irradiation were decreased. Conclusion: The 365 nm LED Laser proposed in this study is considered to compensate the bleaching effect achieved by either using Diode laser or surgical methods.

• The Korean Journal of Pain
• /
• v.5 no.2
• /
• pp.258-262
• /
• 1992

Herpes zoster is an acute infectious viral disease which affects the posterior spinal root ganglion of the spinal nerve. A single posterior spinal root ganglion or a small number of adjacent ones may be affected, usually on the same side. The corresponding ganglia of the cranial nerve may also be similarly affected. The causative virus, varicella zoster, belongs to the group of host-specific DNA viruses. Postherpetic neuralgia is a continuation of herpes zoster in older patients. Although spontaneous resolution of herpes zoster may be expected in most patients, a significant number experience intractable pain. Postherpetic neuralgia is one of the most difficult problems encountered by physicians. There are many methods for management of postherpetic neuralgia, but there is no method that results in complete remission. Laser has lately come into use to reduce several acute or chronic pains. In order to determine the degree of pain relief by laser, 27 patients of postherpetic neuralgia were irradiated with He Ne, Infrared, and $CO_2$ combine scan moded lasers two to three times per week. The results were as follows: 1) The most frequent site was thoracic vertebral nerve area. 2) Patients younger than 70 years of age showed an improvement rate of 57% vs 27% for those patients older than 70 years of age. 3) Laser therapy proved effective of those patients who received the laser treatment within one month of the onset of the disease. 4) For those patients who received treatment within one month of the disease and reflecting a 50% improvement rate, the average irradiation time was 5.7.

• The Korean Journal of Pain
• /
• v.3 no.2
• /
• pp.139-143
• /
• 1990

There are several methods for the treatment of herpetic neuralgia, but there is no method that results in complete remission. The laser has lately come into use to reduce several acute or chronic pains. Twenty six patients who suffered from herpetic neuralgia were treated with Ne-Ne and Ga Al AS lasers simultaneously 2 or 3 times per week. In order to determine the degree of pain relief, we used the visual analogue scale. The results were as follows. 1) Low level laser therapy (LLLT) was a non-invasive, simple method. 2) The improvement rate after 15 irrradiations of laser was 63%. 3) The Highest improvement rate (24%) was shown after one irradiation of laser. 4) Only one patient above age 60 (3.8%) developed postherpetic neuralgia. 5) There was no significant difference effects of LLLT between above and below the age of 60. 6) There was no complication during or after irradiation of laser.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.701-706
• /
• 2015

In this study, experimental and computer simulation results are compared and analyzed. Three-dimensional (3D) fabricated matrices from an MJM 3D printer were joined with poly-acetate thermoplastic polymers using a diode laser. A power range of 5-7 W was used to irradiate the boundary of two polymers. The heated polymers flowed into the matrices of the 3D fabricated structure, and reliable mechanical joining was achieved. Computer simulation showed the temperature distribution in the polymers, and flow direction was estimated based on the flux and temperature information. It was found that the more than the minimum energy threshold was required to effectively join the polymers and that two scans at low-speed were more effective than four scans at high speed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.85-90
• /
• 2014

We realized a wireless multiple integrated laser engagement system composed of personal area network using Zigbee. The wireless laser detector had function of analog signal processor, decoder and wireless communication. However, it should consume low power and be small and light in order to be attached to a soldier's body. The decoder was realized in software to be small and light. We induced low power consumption as reducing the load of system using a narrow band optical filter. The fabricated wireless laser detector functioned well in optically noisy environment. Although the communication to the player unit through the wireless personal area network was dependent on the attachment place it was perfectly worked with transmission power of -40.2dBm or more.

• Journal of Oral Medicine and Pain
• /
• v.21 no.1
• /
• pp.153-171
• /
• 1996

저수준레이저를 이용하여 창상이나 병소의 치유과정에 대한 효과를 조사하기 위하여 많은 연구가 시행되었다. 연구에 의하면 갈륨비소 레이저광이 생체자극효과를 가진다고 하며, 저수준레이저를 조사하면 단백질과 핵산 (DNA) 합성을 자극하여 치은섬유아세포의 증식을 촉진한다고 보고하였다. 외상병소나 근육병소의 치료에 사용된 레이저치료법에 관한 관심이 점증함에 따라 저수준레이저요법 (LLLI)의 치유효과를 설명하기 위하여 분자생물학적 수준의 연구를 시행하기에 이르렀다. 보고에 의하면 Mutans Streptococcide 는 LLLI를 사용시 증식이 촉진되며, 다른 세균에서도 유사한 증식효과가 나타날 것이라고 주장하였다. 그러므로 LLLI가 피부감염을 야기하는 가장 흔한 원인인 Staphylococcus aureus 도 마찬가지로 증식이 촉진되는 지를 조사해볼 필요가 있으며, 또한 감염과 같이 특정 병적 상태에서의 저수준레이저광의 효과는 아직까지 명확하게 밝혀져 있지 않았다. 그러므로 본 연구의 목적은 첫째, Staphyloc occus aureus 의 증식에 대한 저수준레이저광의 효과를 조사하는 실험이며, 둘째 Staphylococcus aureus 로 가염된 피부창상에 대한 저수준레이저광의 효과를 판정하는데 있다. 34개의 Staphylococcus aureus 배양표본을 사용하여 48시간의 세포주기동안 조사기간과 조사시간, 그리고 레이저 펄스(laser pulse)형에 따라 3가지 실험을 시행하여 증식에 가장 효과적인 상태와 가장 비효과적인 상태의 갈륨비소 반도체 레이저펄스를 결정하였다. 이후 지름 약 6 mm의 개방창상을 44마리 백서의 양측 대퇴부에 형성하여 모든 창상에 S. aureus를 감염시켰다. 모든 표본은 펄스형과 조사방법 (중앙조사법과 주변조사법)에 따르는 실험을 하기 위하여 4가지로 분류하였다. 각 백서의 양측 창상중 하나는 1,3,5,7일 마다 각 실험의 방법에 따라 레이저를 조사하고 실험동물의 다른 창상은 대조군으로서 사용하였다. 모든 창상의 면적은 실험 1,3,5,7 일째에 일정한 거리에서 사진촬영하여 면적계를 이용, 측정한 후 통계적인 의의를 조사하였다. 본 연구의 결과는 저수준레이저는 특정 조건하에서 S. aureus의 증식을 촉진하였다. 그러나 S. aureus에 감염된 창상을 저수준레이저로 조사시 치유가 촉진되었다. 중앙 조사법고 주변조사법에 의한 창상치유효과는 통계적인 의의가 보이지 않았다. 따라서 결론적으로 S. aureus 에 감염된 창상에 직접 또는 간접적이든 pulse의 종류에 관계없이 조사하는 경우 치유효과가 나타나는 것은 정사주위 조직의 LLLI 자극효과가 염증의 확산을 억제한다고 말할수 있다.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.447-455
• /
• 2005

The purpose of this study was to examine the effect of Nd:YAG laser irradiation for sensory nerve conduction change. Nd:YAG laser was irradiated to mental region for 5 minutes with the parameters that 10 Hz and 20 Hz of 100 mJ/pulse. Target size of irradiation was 30 mm diameter of circle and target-tip distance was about 10 mm. Therefore, the power density were 212 $mW/cm^2$ and 424 $mW/cm^2$. Sensory nerve conduction was evaluated with $Neurometer^{\circled}$ CPT/C before and after Nd:YAG laser irradiation. As an outcomes, the current perception threshold(CPT) and pain tolerance threshold(PTT) were obtained. We made a comparison of these two values and the results were as follows. 1. There was no significant difference in CPT at 1W, 10 Hz and 2 W, 20 Hz Nd:YAG laser irradiation. 2. There was no significant difference in PTT at 10 Hz, 20 Hz of 100 mJ/pulse Nd:YAG laser. 3. There were no significant differences in CPT and PTT between 1 W, 10 Hz group and 2 W, 20 Hz group. Therefore, We can make a conclusion that Nd:YAG laser irradiation to mental region have no effect on mental nerve conduction in our study model.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.245-254
• /
• 2022

In this study, we tried to investigate the efficacy of combined light therapy using low-power lasers at 655 nm and LEDs emitting wavelengths at 625 ± 5 nm and 850 ± 10 nm in hair loss and scalp. A total of 33 subjects were enrolled in this clinical trial. Each subject used the LLLT and LED device on the scalp for 10 min on a daily basis for 12 weeks. After 12 weeks of LLLT and LED device use, there were significant improvements in redness, elasticity, and hydration of the scalp. Additionally, hair luster and tensile strength were improved. A remarkable decrease in total shed hairs was observed in all subjects at 4, 8, and 12 weeks without any serious adverse event. Combined light therapy using LLLT and LEDs proved to be an effective treatment for reducing hair loss and improving scalp condition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.967-972
• /
• 2014

The good light permeability and hardness of glass allow it to be used in various fields. Non-conventional machining methods have been used for glass machining because of its brittle properties. As one non-contact machining method, a laser has advantages that include a high machining speed and the fact that no tool making is required. However, glass has light permeability. Thus, the use of a laser to machine glass has limitations. A nanosecond pulse laser can be used at low power for laser-induced backside wet etching, which is an indirect method. In previous studies, a short-wave laser that had good light absorption but a high price was used. In this study, a near-infrared laser was used to test the possibility of glass micro-machining. In particular, when deeper machining was conducted on a glass structure, more problems could result. To solve these problems, microstructure manufacturing was conducted using ultrasonic vibration.