• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.902-905
• /
• 2004

Recently, the composite materials are widely used for manufacturing the helicopter rotor blades. furthermore, composites show great potential on the design of rotor blades due to the advantages of strength, durability and weight of the materials. To keep with this advantages, it is necessary to calculate natural frequencies of a rotating blades for avoiding resonance. In this paper, the structural design process of airfoil cross section is introduced, and natural frequencies of composite rotor blades with variable rpm we investigated.

• 지반과기술
• /
• v.7 no.2
• /
• pp.14-22
• /
• 2010

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.510-513
• /
• 2006

Due to the location of vibration sensitive equipment on the floor, it is necessary for its vibration performance to be maintained within stringent limits, resulting in a design of higher mass and stiffness than would be usual for a floor of this type. Modal testing is conducted on the floor to obtain their dynamic characteristics. A considerable level of vibration transmission is observed by comparing the ratio of simulated transfer and point mobility FRFs of the floor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.281-282
• /
• 2011

• JOURNAL OF ELECTRICAL WORLD
• /
• s.281
• /
• pp.53-57
• /
• 2000

유도전동기는 설계기술, 해석기술, 재료(코어, 마그넷 와이어, 절연재료 등) 제조기술 등의 개발로 그 특성의 향상, 소형$\cdot$경량화, 저소음$\cdot$저진동, 코스트다운 등을 도모하여 왔다. 그러나 최근에 지구환경 보호와 에너지자원의 고갈 등으로 인한 위기감에서 에너지절약과 고효율화의 움직임이 가속되고 있어, 유도전동기에 대해서도 보다 고효율화에 대한 요구가 높아지고 있다. 미국이나 캐나다에서는 규격과 법률에 의한 유도전동기에 대해서도 보다 고효율화에 대한 요구가 높아지고 있다. 미국이나 캐나다에서는 규격과 법류엥 의한 유도전동기의 효율 규제가 개시되고 있으며 유럽, 일본에서도 이에 따라가고 있는 경향이다. 이와 같은 요구에 응하기 위하여 신시리즈의 고기능$\cdot$에너지절약 모터 ''수퍼라인 에코시리즈''를 개발하였다. 수퍼라인 에코시리즈는 권선 및 슬롯의 설계최적화, 고자속 밀도 및 저철손 철심재의 개발, 슬롯 조합의 최적화 등에 의하여 동손$\cdot$철손$\cdot$표류손 등의 손실을 저감시킴과 동시에 고성능 바니시의 개발, 베어링 그리스 및 베어링 하우징 재료의 개량 등으로 다음과 같은 특징을 갖고 있다. (1) 업계 최고급 고효율 일본 JEMA 기준치와 미국 EPAct 기준치를 만족하는 업계 최고급 고효율$\cdot$에너지절약 모터 (2) 인버터 구동에 최적의 특성 및 성능 (3) 내환경성의 강화, 장수명화 습도 100$\%$ RH, 베어링의 장기 Maintenance Free화 (4) 저진동 및 저소음

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.894-898
• /
• 1997

본 글에서는 차량 탑재형 CD 체인저를 중심으로 차량 탑재형 디스크 플레이어의 방진 설계 절차및 CD 체인저의 방진장치로 가장 적합한 오일 댐퍼의 특성과 그 설계법에 대하여 기술하고자 한다.

• Journal of KSNVE
• /
• v.27 no.1
• /
• pp.7-11
• /
• 2017

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.55-63
• /
• 2010

Although the environmental conflicts regarding noise and vibration are continually increasing during construction, noise and vibration occurring in construction are only managed in construction phase. Noise and Vibration occurring in construction are considered to be insufficient, so we find that noise and vibration management in design phase has to be operated for reducing. The objective of this paper is to present noise and vibration management lists to consider in design phase for enhancing efficiency in noise and vibration management and to develop the appraisal sheets for designers to evaluate and the manuals to easily use management lists. To achieve this, we identify the noise and vibration management lists to consider in design phase through analyzing the previous literatures and confirm the 9 lists through conducting a research with experts in environmental area for verifying the propriety of lists. Also, this study applies to AHP technique to identify the priority and the weight evaluation among the lists. Through this study, we identify the most efficient lists, including from the low noise and low vibration methods, the noise and vibration reduction by blasting works, the installment and the arrangement of noise and vibration control equipments, for noise and vibration management in design phase. The achievement of this study will help to prevent the environmental disputes and conflicts in advance and will consider utilizing for the successful construction project.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.201-207
• /
• 2010

In this study, the SIP (Soil-cement Injected precast Pile) method among the Low-vibration & Low-noise pile driving methods was decided into study compensation. Ground vibrations by the SIP methods step by step divide and were analyzed. Quantitative response values and ground vibration equations with reliability were presented from findings of this study. Also, vibration responses that are occurred by the SIP method of construction were compared as quantitative with vibration responses by general method of construction that are presented in existent study. Ground vibration values by the SIP method correspond to level of 17 ~ 57% of values that are assumed by the Attewell & Famer's equation, respectively, and these result compares in reliability 50% and separated distance 10 ~ 50 m. Also, those values were analyzed that correspond to level of 14 ~ 96% of ground vibration values by the Prof. Park's equation, respectively. Construction limit extents, separation distances from vibration occurs position, were presented that can satisfy domestic criteria for vibration control for the SIP methods. Those presented in this paper were divided newly according to reliability.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.4
• /
• pp.299-306
• /
• 2011

This study investigated the SIP-method as a low-vibration, low-noise engineering method. The ground vibrations caused by the SIP-method were measured and analyzed in each step. From the analysis results, quantitative ground vibration values and reliable vibration estimation equations were proposed. Furthermore, the ground vibrations caused by the SIP-method were compared with the ground vibrations caused by other methods presented by existing studies. Based on the vibration estimation equation with 50 % reliability, the ground vibration values by the SIP-method at the distance of 10~150 m corresponded to 17~57 % of the ground vibration values by the equation proposed by Attewell & Famer, and 14~96 % of the ground vibration values by the equation proposed by Prof. Park in his study using a diesel drop hammer. These results showed that the ground vibration reduction effect of the SIP-method was higher those of other general engineering methods. Finally, the permissible scope of work using the SIP-method which meets the domestic vibration standards was presented.