• Composites Research
• /
• v.18 no.4
• /
• pp.27-34
• /
• 2005

Salt water spray and immersion tests were experimentally conducted for over 6 months to investigate the durability of glass fabric/phenolic composites under salt water environment. Mechanical properties such as tensile properties, flexural properties, and shear properties were evaluated and thermal analysis properties such as storage shear modulus, loss shear moduls, and tan 6 were obtained through a DMA. A change in chemical structures was analyzed through a FTIR. According to the results, mechanical properties and thermal analysis properties were sensitive to salt water environment and these properties began to degrade in increasing in exposure times. However, tensile and flexural moduli started to decrease and then slightly increase as increasing in exposure times due to plasticization and crosslinking in matrix as well as physical swelling in composites. Beyond a certain exposure times, these properties began to decrease as further increasing in exposure times. Also the shape and location of peaks in FTIR curves were insensitive to exposure times, but the intensity of peaks would be. finally we found that the durability of glass fabric/phenolic composites were affected on salt water immersion environment rather than salt water spray environment.

• Journal of KIISE:Databases
• /
• v.33 no.3
• /
• pp.271-281
• /
• 2006

Recently the need for Location-Based Service (LBS) has increased due to the development and widespread use of the mobile devices (e.g., PDAs, cellular phones, labtop computers, GPS, and RFID etc). The core technology of LBS is a moving-objects database that stores and manages the positions of moving objects. To search for information quickly, the database needs to contain an index that supports both real-time position tracking and management of large numbers of updates. As a result, the index requires a structure operating in the main memory for real-time processing and requires a technique to migrate part of the index from the main memory to disk storage (or from disk storage to the main memory) to manage large volumes of data. To satisfy these requirements, this paper suggests a unified index scheme unifying the main memory and the disk as well as migration policies for migrating part of the index from the memory to the disk during a restriction in memory space. Migration policy determines a group of nodes, called the migration subtree, and migrates the group as a unit to reduce disk I/O. This method takes advantage of bulk operations and dynamic clustering. The unified index is created by applying various migration policies. This paper measures and compares the performance of the migration policies using experimental evaluation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.409-417
• /
• 2013

Mu-communication board supported by multi-communication is designed with Atxmega 128A1 which is a low power energy consuming of 8-bit microcontroller. ATxmega128A1 microcontroller consists of 8 UART(Universal asynchronous receiver/transmitter) ports which can be setting appropriate user interface having command line interpreter(CLI) program with each port, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. 8 URAT ports are used for the multi communication modem, GPS module, etc. and EEPROM is used for saving a configuration for program running, and flash memory of 128 kbytes is used for storing a Firm Ware, and 8 kbytes SRAM is used for stack, storing memory of global variables while program running. If we uses the hybrid communication of path optimization of VHF, TRS and CDMA to remote control AtoN(aid to navigation), it is able to remove the communication shadow area. Even though there is a shadow area for individual communication method, we can select an optimum communication method. The compatibility of data has been enhanced as using of same data frame per communication devices. For the test, 8640 of data has been collected from the each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 99.4 %.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.143-151
• /
• 2013

NAND flash-based SSDs (Solid State Drive) have advantages of fast input/output performance and low power consumption so that they could be widely used as storages on tablet, desktop PC, smart-phone, and server. But, SSD has the disadvantage of wear-leveling due to increase of the number of writes. In order to improve the lifespan of the SSD, a variety of data deduplication techniques have been introduced. General fixed-size splitting method allocates fixed size of chunk without considering locality of data so that it may execute unnecessary chunking and hash key generation, and variable-size splitting method occurs excessive operation since it compares data byte-by-byte for deduplication. This paper proposes adaptive chunking method based on application locality and file name locality of written data in SSD-based server storage. The proposed method split data into 4KB or 64KB chunks adaptively according to application locality and file name locality of duplicated data so that it can reduce the overhead of chunking and hash key generation and prevent duplicated data writing. The experimental results show that the proposed method can enhance write performance, reduce power consumption and operation time compared to existing variable-size splitting method and fixed size splitting method using 4KB.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.21-30
• /
• 2009

Fusion flash memory such as OneNAND$^{TM}$ is popular as a ubiquitous storage device for embedded systems because it has advantages of NAND and NOR flash memory that it can support large capacity, fast read/write performance and XIP(eXecute-In-Place). Besides, OneNAND$^{TM}$ provides not only advantages of hybrid structure but also multi-block erase function that improves slow erase performance by erasing the multiple blocks simultaneously. But traditional NAND Flash Translation Layer may not fully support it because the garbage collection of traditional FTL only considers a few block as victim block and erases them. In this paper, we propose an Erase Group Flash Translation Layer for improving multi-block erase function. EGFTL uses a superblock scheme for enhancing garbage collection performance and invalid block management to erase multiple blocks simultaneously. Also, it uses clustered hash table to improve the address translation performance of the superblock scheme. The experimental results show that the garbage collection performance of EGFTL is 30% higher than those of traditional FTLs, and the address translation performance of EGFTL is 5% higher than that of Superblock scheme.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.1
• /
• pp.21-27
• /
• 2016

Vanadium redox flow batteries (VRFBs) using the electrolytes containing various vanadium ions in sulfuric acid as supporting solution are one of the energy storage devices in alternatively charging and discharging operation modes. The positive electrolyte contains $V^{5+}/V^{4+}$ and the negative electrolyte $V^{2+}/V^{3+}$ depending on the operation mode. To prevent the mixing of two solutions, proton exchange membranes are mainly used in VRFBs. Nafion 117 could be the most promising candidate due to the strong oxidative property of $V^{5+}$ ion, but causes high crossover of electroactive species to result in a decrease in coulombic efficiency. In this study, the composite membranes using Nafion ionomer and porous polyethylene substrate were prepared to keep good chemical stability and to decrease the cost of membranes, and were compared to the properties and performance of the commercially available electrolyte membrane, Nafion 117. As a result, the water uptake and ionic conductivity of the composite membranes increased as the thickness of the composite membranes increased, but those of Nafion 117 slightly decreased. The permeability of vanadium ions for the composite membranes significantly decreased compared to that for Nafion 117. In a single cell test for the composite membranes, the voltage efficiency decreased and the coulombic efficiency increased, finally resulting in the similar energy efficiency. In conclusion, the less cost of the composite membranes by decreasing 6.4 wt.% of the amount of perfluorinated sulfonic acid polymer due to the introduction of porous substrate and lower vanadium ion permeability to decrease self-discharge were achieved than Nafion 117.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.1-9
• /
• 2012

LCD(Liquid Crystal Display) commonly used as an output device has a drawback of slow response time compared with CRT display. This drawback causes motion blur especially when an abrupt intensity change occurs in an image sequence as time goes on. To overcome the problem of slow response time overdriving technique has been used in TCON of LCD. In this technique, the previous frame data has to be compressed and stored in an external memory. Considering both chip size of TCON and computational complexity, AM-BTC has been applied to the 8bit HD display driver. However, the conventional method is not suitable for 10 bit Full HD because 10 bit Full HD data is much larger than that of 8 bit HD data. Being applied to 10 bit Full HD display driver, the conventional method increase cost by enlarging the external memory size of TCON or deteriorates image quality. In this paper, we propose dual BTC image coding technique for Full HD display driver that is an adaptive coding scheme according to morphological information of each sample block. Through experiments, it is verified that the proposed Dual BTC method performs better than the conventional method not only quantitatively but also qualitatively.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.17-20
• /
• 2004

가정 내에 방송과 총신을 통합하여 제공하기 위한 방법으로서 수동광가입자망(Passive Optical Network)이 제안되고 있다 이를 구현하기 위해 여러 방식들이 연구되고 있는데 크게는 방송과 통신에 각기 다른 파장을 이용하는 방식과, 이들을 시간 다중화 하여 한 개의 과장으로 송신하는 방식으로 나눌 수 있다. 또한 동신에 이용하는 과장의 경우 각 가입자에게 다른 파장을 적용하는 WPON 방식과 모든 가입자에게 한 개의 파장만을 이용하되 시간영역에서 다중화하고 이터넷 프로토콜을 적용하는 EPON 방식으로 구분할 수 있다. WPON의 경우 EPON에 비해 수월하게 광대역 서비스를 할 수 있는 장점이 있으나, 각 가입자 과장의 제어 및 관리가 복잡하며, 고비용을 요구한다. 반면 EPON의 경우 채널의 효율성은 극대화할 수 있으나, 동시 이용자가 많을 경우 전송 속도가 하락한다. 한편, 방송과 통신을 통합한 채널의 특성을 살펴보면 가입자 방향으로의 하향 신호의 양이 중양국 방향으로의 상향 신호의 양에 비해 훨씬 많은 비대칭 구조이다. 따라서 본 연구에서는 이러한 채널 특성에 맞도록 하향 전송에는 WPON의 구조를 이용하고, 상향 전송에는 EPON의 구조를 적용하는 새로운 구조의 광가입자망을 제안하였다. 제안된 구조에 적합한 MPCP (Multi-Point Control Protocol) 프로토콜을 제시하고, 가입자 장치의 여러 종속 신호를 다중화하고 전송할 수 있는 ONU (Optical Network Unit)의 구조를 제안하였다. 또한 이러한 구조를 갖는 W-EPON 테스트베드를 구현하고 전송 시험을 통해 제시된 구조의 적합성을 측정한 결과를 보인다.4 Textual format) 파일을 생성한다. 또한, 콘텐츠 전송 및 저장의 효율성을 위해 이진 포멧인 IPMP화된 MP4 파일을 생성할 수 있다.으로써, 에러 이미지가 가지고 있는 엔트로피에 좀 근접하게 코딩을 할 수 있게 되었다. 이 방법은 실제로 Arithmetic Coder를 이용하는 다른 압축 방법에 그리고 적용할 수 있다. 실험 결과 압축효율은 JPEG-LS보다 약 $5\%$의 압축 성능 개선이 있었으며, CALIC과는 대등한 압축률을 보이며, 부호화/복호화 속도는 CALIC보다 우수한 것으로 나타났다.우 $23.87\%$($18.00\~30.91\%$), 갑폭 $23.99\%$($17.82\~30.48\%$), 체중 $91.51\%$($58.86\~129.14\%$)이였으며 성장율은 사육 온도구간별 차는 없었다.20 km 까지의 지점들(지점 2에서 지점 6)에서 매우 높은 값을 보이며 이는 조석작용으로 해수와 담수가 강제혼합되면서 표층퇴적물이 재부유하기 때문이라고 판단된다. 영양염류는 월별로 다소의 차이는 있으나, 대체적으로 지점 1과 2에서 가장 낮고, 상류로 갈수록 점차 증가하며 지점 7 상류역이 하류역에 비해 높은 농도이다. 월별로는 7월에 규산염, 용존무기태질소 및 암모니아의 농도가 가장 높은 반면에 용존산소포화도는 가장 낮다. 그러나 지점 14 상류역에서는 5월에 측정한 용존무기태질소, 암모니아, 인산염 및 COD 값이 7월보다 다소 높거나 비슷하다. 한편 영양염류와 COD값은 대체적으로 8월에 가장 낮으나

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.2
• /
• pp.33-40
• /
• 2014

At present, Cadastral map of 2 dimensional is in the stream of changing it to 3 dimensional type supported by GPS and laser techniques. In addition, this steam can be explained at the same time with improvement of equipment of storing much information, support of equipment for imaginative 3D spatial information, and support of equipment of expressing land in 3D Cadastral. This study suggest to apply airborne lidar survey technique on cadastral map to acquire comparably and quickly detailed height of ground. For doing this, this study checked out credibility regarding accuracy of airborne lider survey. After choosing research area, this study has done the airborne lidar survey and acquire the result after surveying Cadastral Comparison Point to check out the accuracy of acquired results. In addition, this study check out the result of Cadastral Comparison Point and airborne lidar survey applied by paired sample t-test based on actual results. The result is that test statistics is 0.322 which is 5 % similar level and null hypothesis cannot be rejected, so this study found out that result of both survey ways are the same. Therefore, the result of airborne lidar survey can be utilized to build up 3D Cadastral information hereafter.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.67-74
• /
• 2016

The Prussian Blue Analogue(PBA) has three dimensional structure and the metal - organic framework material, and it has a variety configurations depending on the type of organic ligands. PBA has been receving an attention in the fields of biosensors, optical, catalytic, and hydrogen storage device. Also, it is an environmental friendly substance with a chemical stability. In addition, PBA is widely used in the filed of adsorption art since we can adjust the size of the fine pores. In this study, we synthesized $Mn_3[Fe(CN)_6]_2$, an organometallic framework chains by using a hydrothermal synthesis method. We used $K_4[Fe(CN)_6]$ and $MnCl_2$ as precursors. We also produced a manganese iron oxide, by baking the synthesized material. The effect of the size and shape of the particles was examined by controling pH of the precursor solution, the molar concentration of the precursor, and reaction time as the experimental variables. Synthesized absorbent was analyzed by XRD, SEM, FT-IR, UV-Vis, and TG / DTA to evaluate the adsorption properties of several dyes.