This study was carried out to investigate occurence of microbiales density and characteristics of xylanase produced by those in Janggyeong Panjeon. Cladosporium cladosporioides H1, Penicillium citreonigrum H3, Penicillilum toxicarium H4, Aspergillus versicolor H6, Acremonium alternarium H7 isolated from Janggyeong Panjeon produced xylanase, which had different production rates and specialized activities in an acidic condition. Cladosporium cladosporioides H1, Aspergillus versicolor H6, and Acremonium alternatum H7 produced xylanase at a faster rate than other fungi. A xylanase of Cladosporium cladosporioides H1 and Penicillilum toxicarium H4 showed a high thermostability in an acidic condition. As results, this study may lead to the development of a strategy for preservation of organic cultural heritages.
The purpose of this study is to investigate the effects of yeast addition as starter on kimchi fermentation. The strains used as starter were Saccharomyces sp. YK-17 and Saccharomyces fermentati YK-19 isolated from kimchi, grew under anaerobic condition and low temperature, which showed the acid and base resistances. Chemical and microfloral changes, as well as the sensory properties of starter added kimchi during fermentation were compared with the control fermented without starter. The acidity of kimchi juice was lower and pH was higher in starter added kimchi than the control. Particularly addition of S. fermentati YK-19 prolonged the optimally fermented period (pH 4.0, acidity $0.6{\sim}0.8%$) up to more than 63%. The content of lactic acid, the major non-volatile organic acid in kimchi, was increased rapidly followed by S. sp. YK-17 and S. fermentati YK-19 group. The microfloral changes were found a little different among the samples. Among the microorganisms, Leuconostoc sp. and Lactobacillus sp. showed highest change, and Streptococcus sp. and Pediococcus sp. showed ralatively low change. The growth of Lactobacillus sp. which was the main acidifing microorganism was inhibited by starter addition, particularly by S. fermentati YK-19. The sensory characteristics of acidic and moldy flavor were significantly reduced by the addition, while fresh flavor was increased in starter added group.
In this study, thr effect of $Bi_2O_3$ and BN addition as grain boundary modifiers on sintering and electrical properties of semiconducting PTCR(Positive Temperature Coefficient of Resistivity) mate rial were analyzed using TMA, XRD and Complex Impedance Spectroscopy method. Bismut.h Ox~de and Boron Nitride were added to Y-doped $BaTiO_3$ respectively. Bismuth sesquioxide up to O.lmol%solubil~ ty limit of $Bi_2O_3$ in Y--$BaTiO_3$ ceramics-retarded densification and grain growth, and further addition mitigated these retardation effects. The resistivity at room temperature increased with increasing amount of $Bi_2O_3$ and thus decreased the PTCR effect, probably due to the $Bi_2O_3$ segregation on the grain boundaries. From the complex ~mpedance pattern, it is known that the grain boundary resisitivity is dominant on the whole resistivity of sample. In the result of applying the defect chemistry, $Bi^{3+} \;and \; Bi^[5+}$ are substituted for Ua and Ti site, respectively. Boron nitride decomposed and formed liquid phase among the $BaTiO_3$ grains. The decomposed com~ ponents made the second phase and existed the tr~ple juntion from the result of EPMA. From the complex impendencc pattern, the gram and grain boundary resistivity were small. The grain size increased with increasing BN contents, and decreased grain boundary resistivity enhanced the PTCR effect.
Anodic oxide films on aluminum play an important role as a dielectrics in aluminum electrolytic capacitor. In order to obtain the high capacitance, ZrO$_2$ films were coated on aluminum foils by sol-gel method and then, the properties of anodized films were studied. The coating and drying of the films were repeated 4-10 times and annealed at 300~$600^{\circ}C$ and the triple layer of ZrO$_2$/Al-ZrO$_{x}$ /Al$_2$O$_3$ was formed onto aluminum substrates after anodizing of ZrO$_2$/Al film. The thickness of $Al_2$O$_3$ layer was decreased with increasing the annealing temperature due to the densification of ZrO$_2$ film. The ZrO$_2$ films were crystallized even at 30$0^{\circ}C$ and showed nanocrystalline structure. The. capacitance of aluminum foil annealed at low temperature was higher than that at high temperature. The increase of capacitance was due to the high capacitance of ZrO$_2$ film annealed at low temperature. The capacitance of ZrO$_2$ coated aluminum increased about 3 times compared to that without a ZrO$_2$ layer after anodizing to 400 V. From these results, the aluminum foils with composite oxide layers are found to be applicable to the aluminum electrolytic capacitor.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
v.9
no.1
/
pp.1034-1037
/
2005
The variation of shapes and related properties of ZnO nanostructures grown on the metal pattern and Si substrate have been investigated. Ni, Cr metal patterns were formed on Si (111) substrates by e-beam evaporation, and ZnO nanostructures were fabricated on it by using thermal evaporation of Zn powder in air. Growth temperature was controlled from 500 $^{\circ}$C to 700 $^{\circ}$C. When the growth temperature was relatively low, no considerable effect was found. However, UV emission intensity decreased, and Green-emission intensity, which is regarded as originated from the defect state in the ZnO nanostructure, increased as growth temperature increase. Also, the variation of nanostructure shape at high temperature (700 $^{\circ}$C) is understood in terms of the enhanced incorporation of metal vapor during the nanostructure formation.
Proceedings of the Plant Resources Society of Korea Conference
/
2019.10a
/
pp.50-50
/
2019
잇꽃(Carthamus tinctorius L.)은 국화과에 속하는 두해살이 초본 식물로 한자명은 홍화(紅花), 영명으로는 Safflower를 사용하고 있다. 잇꽃의 원산지는 이집트, 아프카니스탄 등의 서남아시아가 원산지로 알려져 있으며, 우리나라의 잇꽃 재배면적은 2010년 39 ha 수준이 재배되다가 2016년에는 67 ha로 재배면적이 증가한 것으로 보고되고 있다. 우리나라에서 잇꽃 이용은 잇꽃 종실을 위주로 이용되고 있으나 일본의 경우 잇꽃의 경관적 가치를 활용하여 산형현(山形縣)에서는 홍화축제가 매년 개최되고 있으며, 미국 등에서는 잇꽃의 저온압착유가 기능성 건강식품류로 판매되고 있다. 본 연구는 일조시수가 짧은 표고 500 m의 준고랭지에서 잇꽃의 경관적 가치 활용도를 평가하기 위해 차광조건에 따른 개화특성 및 종실 수량성을 평가하기 위해 수행되었다. 비가림 하우스에서 5월 9일 파종후 생육 54일차인 7월 5일 개화기에 지상부 발육량을 조사한 결과 차괄비율이 강해질수록 엽장폭비가 감소하여 세장형에서 장타원형으로 성장함을 알수 있었고, 분지수는 30% 차광조건에서 증가하는 경향을 보였다. 같은 시기에 조사한 엽면적에서는 30% 차광에서 증가하다가 차광비율이 높아질수록 감소하였으며, 식물체당 총 착화수는 30% 차광조건에서 20.3화/주로 가장 많았고 2차 화경의 착화수도 많은 경향을 보였다. 착생된 꽃의 개화단계를 3등급으로 구분하여 비율을 조사한 결과 차광 조건에서는 개화 2, 3단계의 비율이 무차광에 비해 낮아 개화가 지연됨을 알수 있었고, 건조한 관상화의 색도에서는 차광비율이 높아질수록 b 값이 증가하여 황색값이 높아지는 것을 알수 있었다. 파종 후 생육 94일 차인 8월 13일 종실을 수확하여 식물체당 100립중을 조사한 결과 무차광 4.9 g에 비해 차광조건에서는 감소하는 경향을 보였고, 종실수량성에서도 무차광에서 201.1 kg/10 a로 가장 높아 차광조건에서 잇꽃 재배는 개화지연에 의한 등숙률의 감소로 종실수량성이 감소하는 것으로 판단되었다.
The remains found in Geumcheok-ri, Gyeongju are located in close proximity to the Ancient Tombs in Geumcheok-ri, Gyeongju (Historic Site) which were built between the late 5th and early 6th centuries, and these tombs are known to belong to the powerful rulers of that area. Using metallurgical techniques, this study was conducted on the iron objects obtained from the excavated remains in Geumcheok-ri, Gyeongju which are presumed to have a close relation to the nearby ruins that played an important role in the growth of Silla. To identify differences in manufacturing techniques based on the purpose of the iron objects, eight objects were selected after classifying them by use and the microstructure and non-metallic inclusions were investigated. The analyses results confirmed that the manufacturing process involved forging iron with a high or low carbon content to produce a particular shape, and that the carburization process was applied to iron post forging a shape to increase its strength when necessary. The mechanical properties were improved by selectively applying the steelmaking method and the heat treatment technique considering the functions of the parts, and the low temperature reduction was applied to the smelting process. Furthermore, in comparison with the iron objects excavated from the remains located in the center of Gyeongju and its outskirts, it is confirmed that there is similarity in the smelting and manufacturing techniques between these objects.
The creep behavior of a rapidly solidified and consolidated Al-9.45wt%Fe-4.45wt%Cr alloy were investigated in the stress range 40 to 115 MPa and temperature range 300(0.53Tm) to 441$^{\circ}C$(0.66Tm). It is of use to available aerospace and automobile industries for the improved performance of materials used at high temperature. Because Al alloys with improved creep resistance offer the potential for lower weight and reduced costs in aerospace and automobile components (e.g., structural members and engine parts) through the replacement of heavier and more costly materials, the safety in use at high temperature is good. The alloy is characterized by high stress exponents and activation energies for creep, which are greatly dependent on the stress and temperature. Because the creep stress is seen to cause a strongly significant enhancement of coarsening, the coarsening rate of the dispersed particles in all crept specimens is faster than that in isothermally annealed specimens. Dislocations connecting dispersoids are observed more cofrequently in crept specimens with higher stress and lower temperature. The creep strain rates in the power law creep regime were found to be predicted much better by the Shorty and Rosler/Arzt equation with the inclusion of a threshold stress and dislocation detachment mechanism. The dispersoids in this alloy were acting a source of void nucleation that finally leaded to ductile fracture within the grain so called intergranular. Each void was initiated, grown and failed at the dispersoids in the aluminium matrix. Grain boundary accommodation of the slip produced, which result in initiation of the void and then final transgranular fracture. Therefore, it was confirmed that these dispersoids played an important role in the fracture mechanism by the formation of $Al_{13}Fe_4$, $Al_{13}Cr_2$ and $Al_2O_3$.
Jeong Gul Jang;Sung-Tae Yu;Byung-Do Kim;Myung-Hoon Yi;Hye-Yeon Kwon
Proceedings of the Plant Resources Society of Korea Conference
/
2021.04a
/
pp.21-21
/
2021
주걱댕강나무는 경남 양산의 천성산에서만 생육하는 산림청·국립수목원 지정 희귀식물(Critically Endangered, CR)로 현지외 보전 및 대체 서식지 조성을 위해 번식 특성에 대해 알아보았다. 종자번식의 경우 450립의 종자를 저장방법에 따라 파종한 결과 노천매장 3.56%, 저온건조저장 0.67%, 습사저온저장 0.22%로 발아율이 매우 저조하였으며, 배양토 조건에 따라 직파 실험한 결과 모래 2.44%, 원예용 상토 2.22%, 현지내 산림토 1.11%, 현지외 산림토 0%로 이 또한 발아율이 매우 저조하였다. 삽목번식의 경우 숙지삽은 모래+펄라이트 36.1%, 모래 31.1%, 원예용 상토 20.0%로 나타났으며, 휴면지 삽수의 발근촉진제 처리 효과는 IBA 1,000PPM에서 37.8%, IBA 7,000PPM 30.0%, 무처리 28.9%, IBA 5,000PPM 27.8%의 발근율을 보였고 신초길이, 뿌리의 수, 뿌리 길이는 전반적으로 발근촉진제 처리와 함께 농도가 높아질수록 뿌리 성장이 왕성한 것으로 나타났다. 녹지삽은 모래 80%, 모래+펄라이트 76.7%, 피트모스+마사토 73.3%, 피트모스+펄라이트+버미큘라이트 70.0% 순이며, 왕모래와 왕모래+마사토는 26.7%와 36.7%로 다소 저조하였다. 녹지삽수의 굵기는 4mm이상 구간에서 발근율이 73.3%로 가장 높았으며, 녹지삽수의 길이는 7~8cm 구간에서 80.0%로 가장 높게 나타나 삽수의 굵기가 굵고 8cm내외의 길이가 효율적인 것으로 나타났다. 근삽은 발아율이 88.3~96.7%로 모든 배양토에서 높게 나타났다. 근삽수 직경 7~8mm에서 100%이며 3~4mm 또한 91%로 나타났다. 근삽수 길이는 4~5cm와 10~11cm에서 100%, 6~7cm 88.1%, 8~9cm 94.4%로 나타나 4~5cm를 제외하고는 삽수 길이가 길수록 신초 생장과 발근이 비례하는 것을 확인하였다. 주걱댕강나무는 실생보다 삽목번식이 더 효율적이며, 그 중 근삽이 가장 발근율이 높다. 배양토는 모래 단용구를 제외하고는 평균 95%이상으로 나타났으며, 근삽수는 직경이 굵고 길수록 신초 생장과 발근이 왕성하다. 따라서, 현지외 보전을 위해 향후 휴면성의 종자 발아 연구가 필요하며, 영양번식을 할 경우 근삽이 가장 효율적인 것을 확인하였다.
Journal of the Korean Society of Food Science and Nutrition
/
v.43
no.1
/
pp.135-140
/
2014
Pre-storage ultra-violet (UV) light treatment on fresh produce is known to inactivate the contaminated microorganisms, activate the defense system, and delay ripening extending the shelf life. As UV light emitting diode (LED) becomes available at a relatively low price, continuous or intermittent UV treatment during chilled storage is possible in a container or package. This study attempted an in situ UV LED treatment on fresh produce stored under a refrigerated container in order to see its potential in the fresh produce storage and further optimize its application conditions. The effect of in-container UV LED irradiation on the quality preservation of shredded carrots was investigated in the air and modified atmosphere (MA) conditions. Two sets of experiment with Escherichia coli inoculation and with natural microbial flora in the air (two 30 minute on-off cycles of 1 $diode/dm^2$ per day at a location above 2 cm) showed a clear and significant effect of the UV LED irradiation on the suppression of microbial growth: 280 nm was the most effective by maintaining a lower microbial count by at least 0.5 log (CFU/g) throughout the 6 day storage period. The carotenoids content of shredded carrots subjected to UV LED treatment at 365 and 405 nm in the air was higher than that of the control shredded carrots. In MA condition of $O_2$ of 1.2~4.3% and $CO_2$ of 8.4~10.6% being indifferent with LED wavelengths, 280 nm UV LED irradiation was also effective in inhibiting the microbial growth. While there was no observed difference in the carotenoids content between untreated and UV LED-treated shredded carrots in MA, UV LED irradiation at 365 and 405 nm was slightly better in DPPH radical scavenging activity. The use of UV LED in storage container or package seems to give the benefits of preserving the microbial and nutritional qualities of minimally processed fruits and vegetables.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.