• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.101-106
• /
• 1998

Two types of CoMo/zeolite as well as $NiMo/{\gamma}-Al_2O_3$ were prepared and their activities and selectivities of low-temperature dibenzothiophene(DBT) hydrodesulfurization(HDS) were studied in high pressure fixed bed reactor. The HDS activities of CoMo/zeolites were higher than that of $NiMo/{\gamma}-Al_2O_3$ at temperatures below $225^{\circ}C$ while they were lower than that of $NiMo/{\gamma}-Al_2O_3$ at temperatures higher than $275^{\circ}C$. The main products from $NiMo/{\gamma}-Al_2O_3$ were biphenyl and cyclohexylbenzene. The product distribution of CoMo/zeolite catalysts was different from that of $NiMo/{\gamma}-Al_2O_3$. It is speculated that DBT is converted to alkylcyclohexane over zeolite based catalysts through both alkylation and hydrogenation reactions. The crystal structure of molybdenum was $MoO_3$ in fresh zeolite support while mixtures of $MoO_3$ and $MoS_2$ were observed in the aged catalyst.

• Clean Technology
• /
• v.19 no.3
• /
• pp.287-294
• /
• 2013

The $NH_3$-selective catalytic reduction (SCR) reaction of NO with excess of oxygen were systematically investigated over Cu-zeolite and Fe-zeolite catalysts. Cu-zeolite and Fe-zeolite catatysts to adapt the SCR technology for mobile diesel engines were prepared by liquid ion exchange and incipient wetness impregnation of $NH_4$-BEA and $NH_4$-ZSM-5 zeolites. The catalysts were characterized by BET, XRD, FE-TEM (field emission transmission electron microscopy) and SEM/EDS. The SCR examinations performed under stationary conditions showed that the Cu-exchanged BEA catalyst revealed pronounced performance at low temperatures of $200{\sim}250^{\circ}C$. With respect to the Fe-zeolite catalyst, the Cu-zeolite catalyst showed a higher activity in the SCR reaction at low temperatures below $250^{\circ}C$. BEA zeolite based catalyst exhibited good activity in comparison with ZSM-5 zeolite based catalyst at low temperatures below $250^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.23-32
• /
• 1998

Al2O3/Al composites were produced by immersing the sintered silica preform in molten aluminum which contained magnesium as impurity. Three distinct regions existed in the penetration behavior of molten me-tal with changing the reaction temperature. These regions are denoted as low temperature regime(75$0^{\circ}C$-85$0^{\circ}C$) intermediate regime(90$0^{\circ}C$-95$0^{\circ}C$) and high temperature regime(100$0^{\circ}C$$\leq$) In the low temperature regime the penetration speed of molten aluminum increased with increasing reaction temperature whereas it decreased in the intermediate regime due to the phase transition of alumina formed by displacement reac-tion. In the high temperature regime the penetration speed of molten aluminum was the highest at 100$0^{\circ}C$ which was 3.6 mm/hr But above 105$0^{\circ}C$ molten aluminum did not penetrate into the silica preform because of the formation of a dense spinel layer at the preform surface by magnesium in molten Al.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.417-422
• /
• 2011

The low temperature pyrolysis of ABS resin has been carried out in a batch reactor under the atmospheric pressure. The effect of the reaction temperature on the yield of pyrolytic oils has been determined in the present study. The oil products formed during pyrolysis were classified into gas, gasoline, kerosene, gas oil and heavy oil according to the petroleum product quality standard of Ministry of Knowledge Economy. The conversion reaches 80% after 60 min at $500^{\circ}C$ in the pyrolysis of ABS resin. The amount of the final product was ranked as gas heavy oil > gasoline > gas oil > kerosen based on the yield. The yields of heavy oil and gas oil increase with an increase in the reaction time and temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.318-318
• /
• 2009

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.12
• /
• pp.793-799
• /
• 2016

In a hybrid fuel cell system, low-temperature reforming technology, which uses waste heat as a heat source, is applied to improve system efficiency. A low temperature reformer is required to optimize geometry in low thermal conditions so that the reformer can achieve the proper methane conversion rate. This study analyzed internal temperature distributions and the reaction patterns of a reformer by considering the change of the shape factor on the limited heat supply condition. Unlike the case of a high temperature reformer, analysis showed that the reaction of a low temperature reformer takes place primarily in the high temperature region of the reactor exit. In addition, it was confirmed that the efficiency can be improved by reducing the GHSV (gas hourly space velocity) or increasing the heat transfer area in the radial direction. Through reacting characteristic analysis, according to change of the aspect ratio, it was confirmed that a low temperature reformer can improve the efficiency by increasing the heat transfer in the radial direction, rather than in the longitudinal direction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.143-143
• /
• 1999

Co/Ti 다층 박막을 제조하기 위해 직류원 마그네트론 스퍼터링 시스템을 이용하여 (100)실리콘 단결정 기판위에 Co와 Ti층을 각각 2/2, 5/5, 10/10 nm 정도의 두께로 조절하여 세가지 조성의 Co/Ti 다층 박막을 제조하였다. 이러한 Co/Ti 다층 박막의 후속 열처리는 Ar 가스분위기 하에서 Tube furnace를 이용하여 20$0^{\circ}C$와 30$0^{\circ}C$, 40$0^{\circ}C$의 온도에서 진행하였다. 증착초기에서부터 후속 열처리 공정을 진행하는 동안, Co/Ti 다층 박막에서의 계면반응을 미세 구조 변화 및 전기, 자기적 특성변화와 연관지어 관찰하였다. Co/Ti 다층 박막의 결정 구조와 미세 구조 변화를 관찰하기 위해 각각 X-선 회절기와 투과 전자 현미경을 사용하였고, 다층 박막의 전기적, 자기적 특성 변화를 관찰하기 위해 각각 4점 탐침기, 진동 시료형 자속계를 이용하였다. Co/Ti 다층 박막을 20$0^{\circ}C$의 저온에서 열처리를 한 경우에는 증착 초기의 계면반응에 의해 형성된 비정질 층이 성장하였고, 30$0^{\circ}C$와 40$0^{\circ}C$의 고온에서 열처리를 하는 경우에는 비정질 측의 성장보다는 새로운 화합물 CoTi 결정상이 형성되면서 비정질상은 오히려 감소하였다. 즉, Co/Ti 다층 박막의 계면 반응은 결정질 Co와 Ti을 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응이 활발히 일어났다. 특히, 소모된 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응일 활발히 일어났다. 특히, 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응일 활발히 일어났다. 특히, 소모된 계면 반응물 Co와 Ti 중에서 Ti의 소모속도가 더 빠르게 관찰되었다. 이로부터 Ti 이 증착초기에서 저온 열처리 과정동안 Co/Ti 다층 박막의 계면에서 일어나는 비정질화 반응의 주 확산자로 작용했다는 것을 알 수 있다. 한편, 30$0^{\circ}C$와 40$0^{\circ}C$의 고온에서 열처리한 Co/Ti 다층 박막의 계면 반응은, 비정질 반응에 의한 비정질층의 형성보다는 새로운 화합물 결정질 CoTi상을 형성시키는 결정화 반응이 우세했다. Co/Ti 다층 박막의 전기적 저항은, 열처리에 의한 비정질 층의 생성 및 성장으로 인해 증가하였고 새로운 저저항 CoTi 결정상의 형성으로 인해 감소하는 것을 알 수 있었다. 또한 Co/Ti 다층 박막의 포화 자화값은, 열처리에 의한 계면에서의 비정질화 반응과 CoTi 결정화 반응으로 인해 강자성체인 Co 결정상이 감소됨에 따라 감소하는 경향을 나타냈다.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.2
• /
• pp.93-98
• /
• 2001

A chilling-tolerant japonica-type and a chilling-susceptible indica-type of rice (Oryza sativa L.) plants were compared with respect to various physiological parameters during chilling and subsequent recovery. The japonica-type and the indica-type of rice cultivars used were Ilpumbyeo and Taebaekbyeo, respectively. The two rice cultivars exhibited little or no differences in the changes of leaf fresh weight and chlorophyll content during chilling at $5^{\circ}C$ for 3 days. During subsequent recovery at $25^{\circ}C$, however, Ilpumbyeo restored its growth more rapidly than Taebaekbyeo. Since the changes of relative water content, malondialdehyde production, an estimate of lipid peroxidation, and chlorophyll fluorescence were significantly different in the two rice cultivars during the chilling and subsequent recovery, they were found to be more sensitive physiological parameters than fresh weight and chlorophyll content. However, the differences in relation to water content, malondialdehyde production, and chlorophyll fluorescence between the two rice cultivars were smaller during chilling than those during subsequent recovery. These results suggest that relative water content, malondialdehyde production, and chlorophyll fluorescence could widely be used as important physiological parameters for screening chilling-tolerant plants.

• Elastomers and Composites
• /
• v.42 no.1
• /
• pp.47-54
• /
• 2007

Reaction kinetics of polyurethane elastomers (PU) were studied using dynamic DSC and TGA for three PU samples of general purpose (Sample A), high temperature cross-likable CASE purpose with MOCA (Sample B), and RT cross-likable CASE purpose grade (Sample C). From DSC results, sample with MOCA(Sample B) showed lower shift of peak temperature, while showing broader thermograms than those of general purpose grade (Sample A). On the other hand, RT cross-linkable PU grade (Sample C) showed an interesting double mode reaction patterns, i.e., a lower temperature reaction at about $70\;^{\circ}C$, and a higher temperature reaction in the range of $140{\sim}170\;^{\circ}C$, indicating that it requires 2-step reaction process in order to complete the reaction. Once the cross-linking reaction completed, however, TGA results showed that all the samples would be considered to have similar chemical structures, showing similar decomposition processes. Sample C, especially, had showed decomposition properties of both Sample A and Sample B. Formation activation energies calculated from Kissinger method showed 10.39, 65.85, 36.52(Low $T_p$) and 18.21(High $T_p$) kcal/mol, while decomposition activation energies were 31.94, 30.84, 24.16 kcal/mol, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.111-115
• /
• 1970

1. Eight Varieties of Nicotiana tabacum, "Yellow special A", "Gold leaf", "Oxford, " "Awha", "Yungzung", "Samsun", "Maruha" and "Hatano" were compared on the photoperiodic responses. 2. Experiments were conducted both under high temp. condition(green-house, average temp $25^{\circ}C$-$35^{\circ}C$) and low temp. condition (out-door; average temp $10^{\circ}C$-$25^{\circ}C$) in four plots of 8.10.12 and 14 hours in day length. 3. The results obtained are summarized as follows; i) In the short day condition, the flowering was accelerated in the low temp. than high. On the contrary, in the high temp, it was accelerated in the long day. ii) Generally speaking, the flowering was responsed more in low temp. and short day length than high temp.-long day. iii) But the above trend was found great difference among varieties..-long day. iii) But the above trend was found great difference among varieties.