• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.12-18
• /
• 1998

본 논문에서는 개선된 elliptic 저역통과 함수를 제시하고, CMOS DDA 소자 및 DDA 응용회로를 이용하여 CDMA 무선 휴대폰용 아날로그 DDA 저역통과 필터를 설계하 였다. 개선된 elliptic 저역통과 필터 함수는 통과대역과 저지대역에서 점진적 감소 파상 특 성을 갖고, 우수 또는 기수 차수 모두에 대해서 ω=0에서는 통과대역의 최대값, ω=∞에서 는 영이 된다. 또한 극점-Q 값이 감소함에 따라 주파수 및 시간영역의 특성 등이 기존의 함수와 비교하여 향상되었다. 아날로그 능동 저역통과 필터는 수동 복종단 제자형 회로망의 저감도 특성이 유지되는 개구리 도약법으로 모의하고, 적분기등을 외부 소자와의 정합이 필 요 없는 DDA를 이용하여 설계하였다. 설계된 DDA 회로의 단위 이득 주파수는 1.32GHz이 고 이를 이용하여 DDA 저역통과 필터를 설계하여 HSPICE로 시뮬레이션한 결과 필터의 차단 주파수는 630KHz로 설계명세조건과 일치하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.7-11
• /
• 2002

A novel microstrip type law-pass filter using thin or thick film resistors is proposed to efficiently eliminate harmonic spurious response in stop-band. The proposed low-pass filter shows the spurious suppression enhancement of 20 dB over a conventional one. The designed low-pass filter could be used as a harmonic rejection filter of a local oscillator for Ku-band satellite payload system.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.238-241
• /
• 1998

성문파 신호로부터 음원변수들을 추출하는 방법과 그 전 단계에서 역 필터링 방법에 의해 구한 미분성문파 신호로부터 고주파 잡음을 제거하기 위해 음원구간에 따라 필터의 대역폭을 달리함으로서 음원변수 추출과정에서 저역통과 필터에 의해 발생할 수 있는 오차를 최소화하기 위한 선택적 저역통과 필터링 방법을 제안한다. 이 방법은 음원모델중 하나인 LF-model 펄스를 합성하여 필터링 함으로서 그 성능을 비교, 평가하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.25-31
• /
• 2003

In this paper, we proposed a novel compact microstrip lowpass filter with an ultra-wide stopband and a sharp cutoff frequency response. To improve the cutoff response of the conventional filter, the coupling effect between two open stubs is used. The slot on the ground with conventional shunt open stubs plays an important role of increasing the stopband at a high frequency. The combination of these structures gives the filter the characteristics of an ultra-wide stopband with a prominent cutoff sharpness. The fabricated microstrip lowpass filter with the size of 19.2 mm $\times$ 14.9 mm has -3 dB cutoff frequency at 1.1 GHz and -20 dB stopband from 1.5 GHz to over 30 GHz. The insertion loss is less than -0.15 dB in the passband.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1155-1163
• /
• 2005

In this paper, we suggest the new method to considerably enlarge stopband without increment of filter sire and loss. The proposed low pass filter looks like outward configuration with the published Modified Generalized Chebyshev (MGC) low pass filter, but the element values completely differ from each other. The published MGC fille, had been considered only the second attenuation pole to reject(or suppress) the harmonic, whereas the stopband of the proposed filter is superior to the published MGC filter because not only the second attenuation pole but also the third harmonic of the first attenuation pole is made use of profitably. We fabricate a low pass filter according to the proposed theory. From the measurement of the fabricated filter, we can confirm that the stopband of the proposed filter is reached above 4 times wider than the conventional Generalized Chebyshev(GC) filter and above 1.7 times wider than the published MGC filter.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.9-14
• /
• 2012

In this study, the diplexer used a separator or a combine of signals was designed and its characteristics were investigated. The diplexer consists of two fixed tuned bandpass filter such as low pass filter(LPF) and high pass filter(HPF) sharing a common part and was simulated. The diplexer with micro-strip structure was fabricated. The LPF of diplexer has insertion loss of -0.4 dB, return loss of -30 dB and 1.6 GHz cut-off frequency and HPF has insertion loss of -0.8 dB, return loss of -30 dB and 1.9 GHz cut-off frequency, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.618-633
• /
• 2000

In this paper, a Gaussian interpolation filter and cubic interpolation filter are presented to do more accurate channel estimation compared to the conventional linear interpolation filter for COFDM systems. In addition to an interpolation filter, a low pass filter using FFT and IFFT is also presented to reduce the noisy components of a channel estimate obtained by an interpolation filter. Channel estimates after low-pass filtering combined with interpolation filters can lower the error floor compared to the use of only interpolation filters. Computer simulation demonstrates that the presented channel estimation methods exhibit an improved performance compared to the conventional linear interpolation filter for COFDM systems in time-varying multipath fading channel and0.1 ~ 0.2 dB of Eb/No difference at BER=10-4 when the perfect channel estimation is compared.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.132-135
• /
• 2000

본 논문에서는 ADSL 모뎀용 아날로그 Front-end 단에 사용되는 Rx과 Tx단의 연속시간 Gm-C 고역 및 저역 통과 필터를 설계하였다. 설계된 Tx의 아날로그 저역 통과 필터는 차단 주파수, 138kHz의 3차 Elliptic 함수를 이용하였고, Rx에서는 138kHz의 3차 Butterworth 고역 필터와 1.1MHz의 3차 Butterworth 저역 필터를 이용하여 설계하였다. 설계된 모든 필터는 주파수와 이득의 튜닝을 용이하게 하고 잡음특성에 유리한 연속시간 Gm-C 실현 법을 이용하여 구현하였다. Gm-C 실현 법을 이용하기 위하여 선형 특성이 개선된 Gm-C 적분기를 새롭게 설계하여 이용하였다. 설계에 활용된 파라미터는 IDEC에서 제공한 아남의 $0.25{\mu}m$ CMOS 1-poly, 5-metal 공정 파라미터를 이용하였으며, 2.5V의 저전압으로써 회로로 구성하였고 HSPICE를 이용하여 검증하였다.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.331-334
• /
• 2006

In this paper, we designed and fabricated the lowpass filter with the wide stopband characteristics using microp- strip line. Adding the $\lambda_g/4$ open stub at the input and output ports, we developed the L-C ladder type lowpass filter using the open stub which has wide stopband characteristics. In order to reduce the entire size qf this filter, the high impedance microstrip lines were made with the meander structure. The lowpass filter was fabricated with the cutoff frequency 2.3 GHz and its measured frequency responses agree well with the simulation results.

• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.443-450
• /
• 2006

In digital image communication systems, YUV 4:2:0 or YUV 4:2:2 images filtered and subsampled versions of YUV 4:4:4 images are utilized and these images recover their size by an interpolation filter. Low pass filters and interpolation filters in the image communication systems are generally utilized. Thus, to improve the image quality, efficient low pass filters and interpolation filters are still required. In this paper, we propose new and efficient low pass filters and interpolation filters and their design method. The low pass filters and interpolation filters used in the MPEG-2 system were developed independently. We utilize wavelet transforms to jointly design low pass filters and interpolation filters. Simulation results show that the proposed filters are superior to the filters used in MPEG-2 in terms of PSNR. In addition, the length of the proposed interpolation filters is shorter than that of the filters used in the MPEG 2 system.