• Journal of Bio-Environment Control
• /
• v.12 no.1
• /
• pp.17-21
• /
• 2003

This experiment was conducted to find out the method of preventing decrease in the marketable yield of oriental melon (Cucumis melo L. var. makuwa MAKINO) under low light intensity. By maintaining low light of 400 $\mu$mol$.$m$^{[-10]}$ 2$.$S$^{-1}$ from 10 days after fruit set to fruit enlargement period, the photosynthetic rate and chlorophyll contents of leaf were reduced. Leaves which had no urea application showed largely decreased photosynthetic rate The content of soluble solids was lower$.$ in the low light than natural light treatment. Regardless of foliar application of urea, % fermentation fruits was under 4% in the natural light treatment and over 10% in the low light treatment. The less the fruit thinning, the greater was % fermentation fruits under low light condition. The % fermentation fruits were 39% and 40% in no fruit thinning treatment. The harvest was delayed under low light condition regardless of foliar fertilization. As the number of thinned fruits was decreased, the harvest time was delayed more. Marketable yield per plant sharply decreased under low light intensity. Compared with natural light, the yield under low light treatment was 16∼34%. The treatment fertilized with 0.5% urea on leaf had 34% greater harvest index of marketable yield than other treatments. In conclusion, when the long low light condition from 10th day after fruiting was forecasted, thinning two fruits out of six fruits and two times foliar fertilization with 0.5% urea should be applied.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.45-53
• /
• 2001

Recently some studies have shown that low light intensity followed by final cure at high light intensity may result in a smaller marginal gap and may be no negative effect on material properties. The purpose of this study was to evaluate the influence of the initial cure with low intensity on the shear bond strength of dentin and the microhardness of composite resin. Twenty intact bovine teeth were prepared for shear bond strength test and each tooth sectioned to three specimens. The specimens were randomly divided into three groups according to the light intensity and curing time as follows; Group I. $450mmW/cm^2$ 40sec Group II. $300mmW/cm^2$ 20sec and $600mmW/cm^2$ 20sec Gropu III. $250mmW/cm^2$ 20sec and $450mmW/cm^2$ 20sec. Samples of each group were restored with light-cured composite resin after dentin bonding and then the shear bond strength of each specimen were measured using universal testing machine. Ten resin specimens per group were prepared. After 24 hours, the Vickers microhardness value was measured at the top and bottom surfaces. The result are as follows; 1. Mean value of low initial intensity groups(II, III) were higher than the control group(I) in shear bond strength, but no significant difference could be found. 2. No significant difference could be found between three groups in microhardness.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.431-435
• /
• 2009

This study was conducted to compare the effect of various LED and UVa light to enhanced coloration of paprika fruits cultivars; 'Special', 'Helsinki'. Immatured paprika fruits were irradiated with red LED, blue LED and UVa lights which were high intensity (red: $50{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, blue: $70{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, UVa: $3{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and low intensity (red: $20{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, blue: $40{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, UVa: $0.25{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). The coloration of 'Special' cultivar was increased the fastest in high intensity UVa light for 2 days after treatment. There were no significantly difference among treatments except the low intensity UVa light. The coloration of 'Helsinki' was increased the fastest in blue LED light, and followed by red LED light and UVa light for 2 days after treatment. The $a^*/b^*$ value of 'Special' and $b^*$ value of 'Helsinki' that indicated the paprika fruit coloration were generally higher high intensity LED and UVa lights than low intensity LED and UVa lights. We couldn't find out any significantly different coloration effect among all treatments in final days of coloration. and rather than UVa treatment fruit shrunk the surface of paprika fruits.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.2
• /
• pp.210-219
• /
• 2017

This study aimed to investigate the prevalence and distribution of enamel hypomineralization, including molar-incisor hypomineralization (MIH), among adolescents and assess their correlation with esthetic satisfaction. A total of 1371 adolescents between the ages of 14 and 16 years in Yangsan city were evaluated for enamel hypomineralization, including MIH, according to the European Academy of Paediatric Dentistry (EAPD) criteria. In a parallel survey, esthetic satisfaction about anterior teeth and its correlation with incisor enamel hypomineralization were analyzed. The prevalence of MIH was 13.8% (n = 189), while that of hypomineralization in any permanent tooth was 23.2% (n = 318), which was substantially greater compared to the national prevalence of MIH. Mandibular first molars exhibited the highest prevalence of hypomineralization, followed by maxillary central incisors and mandibular second molars. Among anterior teeth, the most frequently affected site was the incisal edge of maxillary central incisors. A high degree of hypomineralization in anterior teeth was associated with a high demand for esthetic treatment.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.263-272
• /
• 2001

The aim of this study was to investigate the influence of four different light curing modes on the marginal leakage of Class V composite resin restoration. Eighty extracted human premolars were used. Wedge-shaped class Y cavities were prepared on the buccal surface of the tooth with high-speed diamond bur without bevel. The cavities were positioned half of the cavity above and half beyond the cemento-enamel junction. The depth, height, and width of the cavity were 2 mm, 3 mm and 2 mm respectively. The specimens were divided into 4 groups of 20 teeth each. All the specimen cavities were treated with Prime & Bond$^{R}$ NT dental adhesive system (Dentsply DeTrey GmbH, Germany) according to the manufacturer's instructions and cured for 10 seconds except group VI which were cured for 3 seconds. All the cavities were restored with resin composite Spectrum$^{TM}$ TPH A2 (Dentsply DeTrey GmbH, Germany) in a bulk. Resin composites were light-cured under 4 different modes. A regular intensity group (600 mW/${cm}^2$, group I) was irradiated for 30 s, a low intensity group (300 mW/${cm}^2$, group II) for 60 s and a ultra-high intensity group (1930 mW/${cm}^2$, group IV) for 3 s. A pulse-delay group (group III) was irradiated with 400 mW/${cm}^2$ for 2 s followed by 800 mW/${cm}^2$ for 10 s after 5 minutes delay. The Spectrum$^{TM}$ 800 (Dentsply DeTrey GmbH, Germany) light-curing units were used for groups I, II and III and Apollo 95E (DMD, U.S.A.) was used for group IV. The composite resin specimens were finished and polished immediately after light curing except group III which were finished and polished during delaying time. Specimens were stored in a physiologic saline solution at 37$^{\circ}C$ for 24 hours. After thermocycling (500$\times$, 5-55$^{\circ}C$), all teeth were covered with nail varnish up to 0.5 mm from the margins of the restorations, immersed in 37$^{\circ}C$, 2% methylene blue solution for 24 hours, and rinsed with tap water for 24 hours. After embedding in clear resin, the specimens were sectioned with a water-cooled diamond saw (Isomet$^{TM}$, Buehler Co., Lake Bluff, IL, U.S.A.) along the longitudinal axis of the tooth so as to pass the center of the restorations. The cut surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan) at ${\times}$25 magnification, and the images were captured with a CCD camera (GP-KR222, Panasonic, Japan) and stored in a computer with Studio Grabber program. Dye penetration depth at the restoration/dentin and the restoration/enamel interfaces was measured as a rate of the entire depth of the restoration using a software (Scion image, Scion Corp., U.S.A.) The data were analysed statistically using One-way ANOVA and Tukey's method. The results were as follows : 1. Pulse-Delay group did not show any significant difference in dye penetration rate from other groups at enamel and dentin margins (p>0.05) 2. At dentin margin, ultra-high intensity group showed significantly higher dye penetration rate than both regular intensity group and low intensity group (p<0.05). 3. At enamel margin, there were no statistically significant difference among four groups (p>0.05). 4. Dentin margin showed significantly higher dye penetration rate than enamel margin in all groups (p<0.05).

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.719-727
• /
• 2010

Reduced irradiance promotes shoot elongation depending on developmental stage and environmental factors and decreases plant quality in $Cyclamen$ $persicum$ Mill. To determine the petiole elongation responses to low irradiance, 'Metis Scarlet Red' cyclamen at different developmental stages [juvenile (5-6 unfolded leaves), transitional (1-3 visible flower buds), or mature (1-3 elongating peduncles)] was grown in growth modules at 60 (low light, LL) or 240 (high light, HL) ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD within the growth chambers at different temperatures [16/12 (low temperature, LT), 22/18 (medium temperature, MT), or 28/$24^{\circ}C$ (high temperature, HT) (day/night)]. In Experiment I, juvenile plants were either kept in an LL or HL module during the entire treatment of 4 weeks or were transferred to the other module at 1, 2, or 3 weeks after treatment in an MT chamber. In Experiment II, juvenile, transitional, or mature plants were moved to the HL module at 0, 3, 6, 9, or 12 days after being placed in the LL module at the MT chamber and grown for 21 days. In Experiment III, transitional plants were moved to the HL module at 0, 3, 6, 9, or 12 days after being placed in the LL module at the LT, MT, or HT chambers. As the exposure duration to LL increased from 0 to 4 weeks or from 0 to 12 days, petiole length and plant height increased at all temperatures and developmental stages. In Experiment I, the exposure to LL during the latter period, rather than the early period, increased elongation rate. In Experiment II, petiole elongation in transitional plants was more sensitive to LL than juvenile or mature plants during the early period of the treatment for 12 days. In Experiment III, petiole length increased with increasing temperature and exposure duration to LL. Petiole elongation rate at HT increased rapidly from the beginning of LL exposure as compared to LT. Increase of $6^{\circ}C$ in temperature had the similar effect to LL exposure for 3 days in petiole elongation. To conclude, transitional cyclamen under higher temperatures responds more immediately to low irradiance and elongates its petioles.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.44-50
• /
• 2004

This experiment was conducted to investigate the effects of different levels of light intensity (100, 200, 400 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$, and natural light) on the growth and the fruit quality of cucumber(Cucumis sativus cv. Hyakunari-3). The results of this experiment indicated that plant height and length of lateral shoots were decreased under low light condition, but it was not significantly different among treatments. Leaf area and root weight were lowest under low light intensity(100 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$), but no significant differences were noted between 200 and 400 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$. Photosynthesis rate was decreased with reduced light intensity and total chlorophyll contents, root activity and xylem sap were also decreased under low light intensity, but there was no significant difference between 200 and 400 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$. From the SEM observation the erosion of the guard cells and closed stomata in low light treatment were shown and the size of stoma were small also the stomatal aperture were decreased with reducing the light intensity. Chlorosis in leaves and aborted-liked fruits were appeared under low light condition and Ca and Mg uptake in leaves were decreased by shading in proportion to the decrease of light intensity. Fruit yields were decreased by 65% under 400 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$, and by 80${\sim}$90% under 200 and 100 ${\mu}mol\;{\codt}\;m^{-2}\;{\cdot}\;s^{-1}$, compared to those under the natural light. This low intensity of light caused the sharp decrease in the early harvested yields within two weeks and the fruit yields of lateral shoots were greatly decreased.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2007.05a
• /
• pp.131-134
• /
• 2007

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.07a
• /
• pp.269-274
• /
• 2000

• Journal of Bio-Environment Control
• /
• v.21 no.1
• /
• pp.66-73
• /
• 2012

This study was conducted to develope new indoor plants and to investigate the effects of light intensity on the growth of $Distylium$ $racemosum$, $Osmanthus$ $heterophyllus$ and $Damnacanthus$ $indicus$ under 100 lux, 1,000 lux and 2,500 lux fluorescent lighting for six months in the environment-controlled growth chambers. 1. $Distylium$ $racemosum$ : Most of $Distylium$ $racemosum$ under 100 lux light intensity were blighted in two months, whereas it was 100% of survival under 1,000 lux and 2,500 lux after six months. Plant height, number of leaf, leaf width and leaf length became higher as light intensity increased. The plants maintained under 2,500 lux showed the greatest plant height and leaf number. 2. $Osmanthus$ $heterophyllus$ : $Osmanthus$ $heterophyllus$ under 100 lux light intensity were blighted in two months, whereas it was 100% of survival under 1,000 lux and 2,500 lux after six months. However, under 1,000 lux, it paused plant height and was not increased in leaf number any more. A plant growth status showed the highest value under 2,500 lux in all conditions. 3. $Damnacanthus$ $indicus$ : $Damnacanthus$ $indicus$ was defoliated and blighted under 100 lux light intensity in two months, whereas it was grown properly with 1,000 lux or above. However, the growth under 2,500 lux of $Damnacanthus$ $indicus$ was superior to other treatments. But, $Damnacanthus$ $indicus$ under 1,000 lux after 6 months was more favorable chlorophyll contents, leaf length and leaf width than 2,500 lux. As increasing slightly of chlorophyll contents and leaf growth under 1,000 lux, $Damnacanthus$ $indicus$ could be utilized highly to the indoor ornamental plant.