• Journal of Adhesion and Interface
• /
• v.3 no.3
• /
• pp.1-6
• /
• 2002

We invested which is major one in rubber materials design factors affecting on noise and showed the design guide for low noise tire development in this study. Tire noise and impact noise for rubber sheets were tested at anechoic room. Hardness, tensile and dynamic mechanical properties were also measured using the rubber sheets. A major design factor of rubber materials affecting on the tire noise was hardness or 300% modulus. There was also positive correlation between two properties. Therefore, designing rubber materials to have low hardness or 300% modulus can reduce noise.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.161-165
• /
• 2005

$\alpha,\omega-Vinyl$ poly(dimethyl-methylphenyl) siloxane propelymer (VPMPS ) was prepared by the equilibrium polymerization of octamethylcyclotetrasiloxane $(D_4)$, 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane $(D_3^{MePh})$, and 1,1,3,3-tetramethyl-1,3-divinylsiloxane (MVS) as end-blocker. And also, $\alpha,\omega-hydrogen$ poly(dimethyl-methyltrifluoropropyl)siloxane prepolymer (HPDMFS) was prepared from $D_4$, 1,3,5-trimethyl-1,3.5-trifluoropropylcyclotrisiloxane $(D_3^{MeF3P})$, and 1,1,3,3-tetramethyldisiloxane. Poly(organosiloxane) rubber composite containing high thermal conductive filler was prepared by compounding VPMPS, HPDMFS, spherical alumina, and catalyst in high speed dissolver. The crosslinking density of poly (organosiloxane) composite was measured by oscillation rheometer. Poly(organosiloxane) composites of TC-POXR-2 and TC-POXR-4 prepared by controlling average diameters of thermal conductive filler, spherical alumina according to Horsfield's packing model were shown to 1.13 W/mK for TC-POXR-2 and 1.19 W/mK for TC-POXR-4.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.282-282
• /
• 2011

일반 금속은 부식에 약하다는 단점을 보완하기 위해 개발된 스테인레스 스틸은 내식성이 필요로 하는 다양한 분야에서 이용되고 고크로뮴을 포함한 오스테나이트 스테인레스 스틸은 일반적으로 엔지니어링 재료로 사용되고 있다. 하지만 오스테나이트 스테인레스 스틸은 낮은 표면 경도와 지지용량으로 인해 내마모특성이 필요한 제품에는 사용이 미약한 수준이다. 현재 이러한 내마모특성을 높이기위해 오스테나이트 스테인레스 스틸은 이온질화와 이온주입등의 방법을 사용하여 표면 특성을 향상시키고자 연구되고 있다. 본 연구에서는 저진공 하에서 플라즈마를 이용하여 시편에 질화층과 Nitrogen Supersaturated Austenite층(S-phase)을 형성하여 경도와 인성을 향상시키고, 형성된 S-phase층의 두께에 따른 내식성, 내열성 특성을 확인하였다. 그리고 스테인레스 계열 시편의 질화시 나타나는 CrN층과 비교하였다. 특성 확인을 위한 시편은 약 $400{\sim}500^{\circ}C$ 사이의 공정온도로 질소와 수소가스를 혼합하여 플라즈마를 형성하고 약 4시간동안의 공정을 통해 제작하였다. 제작된 시편의 경도와 조직, S-phase층의 두께를 분석하고 CrN층의 형성여부를 확인하였다. 이와 더불어 공정압력과 가스비의 변화에 따른 실험을 진행하여 질화특성을 확인하고자 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.169.2-169.2
• /
• 2013

본 연구에서는 gas를 이용한 PECVD 공법중 이온화 에너지가 높고 대면적 코팅이 용이한 Hybrid 코팅 장비에서 Linear Ion-Gun 이용하여 탄화수소 계열의 gas인 $C_2H_2$ 와 Si을 함유한 TMS (tetramethylsilane, $Si(CH_3)_4)$ gas를 이용하여 저마찰, 고경도 특성을 갖는 Si-DLC 코팅에 대한 연구를 수행하였다. Si-DLC 코팅에 앞서 전처리 공정으로 Linear Ion-Gun에 Ar gas를 주입하고 고전압의 DC 전원을 인가하여 제품 표면의 건식세정 및 표면 활성화를 진행 후, $C_2H_2$ 와 TMS gas를 Linear Ion-Gun에 주입하여 Si-DLC 코팅 공정을 진행하였다. Si-DLC 코팅시 $C_2H_2$ gas 주입량을 고정하고 TMS 가스 유량을 5~20sccm으로 조절하여 Si 함유량에 따른 Si-DLC 코팅막의 특성을 분석하였다. 이렇게 코팅된 Si-DLC의 박막 특성 분석으로 마찰계수 측정을 위해 ball-on-disk 타입의 tribometer를 사용하였으며, 박막 경도 측정은 Nano-indenter를 이용하여 분석을 진행하였다. 그 결과 Si을 포함하지 않는 DLC의 경우 마찰계수가 ~0.2를 가지는 반면, Si-DLC의 경우 Si 함유량이 약 1.5at%일 때, 마찰계수 ~0.04 저마찰의 우수한 특성을 지니며, 박막의 경도는 22[Gpa]로 고경도의 Si-DLC 코팅을 확인할 수 있었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.3
• /
• pp.335-340
• /
• 2017

Composite resin becomes an essential material in pediatric dentistry. However, incremental filling of composite resin to minimize the polymerization shrinkage takes time. To reduce the polymerization shrinkage, clinicians and researchers have focused on bulk-filling materials. Bulk-base composite resin is newly introduced as bulk-filling composite resin. The purpose of this study was to evaluate microhardness profile of bulk-base composite resin according to the depth of cure. A high flow bulk-base material and a low flow bulk-base material were used for experimental group, and a conventional composite resin was used for control group. Each group consist of 20 specimens, $3.5{\times}3.5{\times}5.0mm$ mold was used to make specimen. Specimens were sectioned at the 2 mm and the 3 mm depth with milling machine. Microhardness profile was measured at the surface, 2 mm depth, 3 mm depth, and 4 mm depth. Microhardness of control group showed statistically significant difference (p < 0.05) according to the polymerization depth. In contrast, experimental group showed no statistically significant difference, except between 0 mm and 4 mm at HFB, 0 mm and 2 mm, 0 mm and 3 mm at MFB. At the surface and the 2 mm depth, the control group showed higher microhardness than the experimental groups (p < 0.05). However, at the 4 mm depth, the experimental groups showed significantly higher microhardness (p < 0.05). The results from this study, the bulk-base composite resin showed higher microhardness at the 4 mm and lower microhardness at the surface and the 2 mm depth. Therefore, if bulk-base resin overcomes the mechanical weakness, it could be considered using in pediatric dentistry.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.312-319
• /
• 2013

The purpose of this study was to evaluate the efficacy of gargle and toothpaste containing low concentration with sodium fluoride on the remineralization through the surface microhardness and mineral content in enamel. After 4 weeks-application, the enamel surface was measured using microhardness tester and the calcium (Ca) and phosphorous (P) concentration of mineral content by electron probe microanalyzer (EPMA) analysis. By combining fluoridated gargle with toothpaste, a remineralized enamel resulted in significantly significant differences among the four groups (p<0.05). The Ca change treated with 0.23% fluoridated toothpaste and 0.02% fluoridated gargle with 0.23% toothpaste demonstrated the highest among the other groups. In conclusion. the fluoridated gargle with toothpaste by low concentration showed a significantly greatest synergistic effect on remineralization of the enamel than the other groups.

• 전기의세계
• /
• v.46 no.4
• /
• pp.5-8
• /
• 1997

존경하는 암기 극기 회장님. 그리고 110년의 역사와 일본현대사에 찬란한 공적을 남기신 일본전기학회 회원 여러분! 안녕하십니까! 이토록 좋은 이절에 아름다운 역사의 도시경도에서 덕망과 학식이 높은신 많은 회원들 앞에서, 강연할 기회를 주셔서 대단히 감사하게 생각하며 또한 영광으로 생각합니다. 아울러 이 기회에 7,000여 대한전기학회 회원들의 따뜻한 인사 말씀을 여러분에게 전하여 드립니다. 저는 오늘 여러분에게 "21세기를 지향한 한.일 양국의 전기공학 기술 협력"이라는 제목으로 말씀드리고자 합니다마는 저 자신이 30여년간 작은 연구소에만 근무하고 있어서 저의 지식은 매우 제한적이며 때로는 편견이 있음도 너그러이 양해하여 주시기 바랍니다. 제가 오늘 여러분에게 말씀드릴 순서는 먼저 한국과 일본의 지정학적 관계와 역사에 대하여 간략하게 말씀드리고, 다음으로 우리나라의 전력산업과 전기공업에 대하여 말씀 드리겠으며, 끝으로 한국과 일본의 기술협력에 대하여 말씀드리고자 합니다.씀드리고자 합니다.

• Journal of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.58-65
• /
• 1983

The mechanical properties (tensile strength, 100% modulus and hardness) of the urethane elastomers prepared from hydroxyl terminated polybutadiene (HTPB), several low molecular weight diols (ethylene glycol, 1, 3-propane diol, 1,4-butane diol, 1,5-pentane diol and 1,6-hexane diol) and two kinds of diisocyanates(TDI: toluene diisocyanate, IPDI: isophorone diisomechanical properties were enhanced for the increases of the concentrations of the urethane group, as predicted. In case of TDI, when the mechanical properties of the elastomers were plotted patterns were observed, which can be explained by hydrogen bondings depending on the number of the methylene carbons. But the mechanical properties of the elastomers derived from IPDI had decreasing curves against the number of methylene carbons in low molecular weight diols, without the characteristic zigzag patterns.

• Sleep Medicine and Psychophysiology
• /
• v.20 no.1
• /
• pp.31-34
• /
• 2013

Objectives: The aim of this study was to evaluate the differences in patients with positional dependent sleep apnea according to their non-supine apnea-hypopnea index (AHI, ${\geq}5$ vs. <5). Methods: 92 patients with positional sleep apnea were evaluated. The patients were divided into two groups : group I was non-supine AHI having ${\geq}5$ ; group II was non-supine AHI having less than 5. Statistical analysis was performed to find the difference between two groups. Results: In 92 patients, the number of group I patients was 11 (12%) and the number of group II patients was 81 (88%). In the severe AHI group, percentage of group I was dominated (70%) and showing a significant difference compared with the mild and moderate AHI groups (p<.05). In the severe body mass index (BMI) group, percentage of group I was dominated (54.5%) and showing a significant difference compared with of the mild and moderate BMI groups (p<.05). The percentage of group I was significantly higher than group II (p<.05) in the AHI, supine AHI, non-supine AHI and snore time. Conclusions: In patients with positional sleep apnea, severe OSA and high BMI are more common in patients with non-supine AHI${\geq}5$ than non-supine AHI<5.

• 한국노년학
• /
• v.39 no.1
• /
• pp.37-60
• /
• 2019

This study was attempt to derive the aging trajectories of Korean elderly people and identify its characteristics. In particular, this study used the successful aging model of Rowe and Kahn as an analytical framework. Using the Korean Longitudinal Study of Ageing(KLoSA), this study applied group-based multi-trajectory analysis to identify multiple aging trajectories in sample of Korean elder aged 65~74(n=2,682). This study also used several demographic characteristics as baseline predictors to identify the characteristics of each aging trajectory. Five dimensions were analyzed in the multi-trajectory model: chronic disease, physical functional limitation, cognitive functioning, depressive symptom and social engagement. As a result of the analysis, five aging trajectories were identified: successful aging(17.8%), usual aging (33.9%), health declining aging(18.2%), pathological aging(7.9%), and aging with mild cognitive impairment(22.1%). In general, the odds of experiencing successful aging were high in men, low-aged, highly educated, high-income, and spousal elderly. On the other hand, for the elderly, who are under-educated, low-income, and high-aged, there was a high probability of experiencing a relatively difficult aging process. In particular, the odds of experiencing a mild cognitive impairment aging was high in older, lower-income women without a spouse.