• 지반과기술
• /
• v.4 no.1
• /
• pp.85-92
• /
• 2007

• Environmental engineer
• /
• s.328
• /
• pp.27-27
• /
• 2013

• Air Cleaning Technology
• /
• v.32 no.1
• /
• pp.17-26
• /
• 2019

• Journal of Aerospace System Engineering
• /
• v.12 no.2
• /
• pp.23-29
• /
• 2018

Contrail is type of clouds which are formed by a condensation of water vapour from the aircraft exhaust when the aircraft is flying the cold atmosphere. Since contrails have considerable effect on greenhouse-effect and military stealth efficiency, researches about contrail avoidance technology has been conducted for decades. However, none of the previous researches concerning contrail avoidance was carried out in Korea. Thus, review of the previous study regarding contrail reduction is absolutely needed. In this paper, researches conducted by several countries are categorically introduced, and practicabilities of their methods are analyzed. This paper also suggests some practical and systematized way to conduct future researches about contrail avoidance.

• Clean Technology
• /
• v.25 no.3
• /
• pp.245-255
• /
• 2019

Pressurized oxy-fuel combustion is a promising technology for $CO_2$ capture with a benefit of improving power plant efficiency compared with atmospheric oxy-fuel combustion. Prior to $CO_2$ compression in this process, a flue gas condenser (FGC) is used to remove $H_2O$ while recovering the latent heat. At the same time, the FGC has a potential for high-efficiency removal of $SO_x$ and $NO_x$ by exploiting their good solubility in water. In this study, experiments were carried out in a lab-scale, direct contact FGC under different pressures varying between 1 and 20 bar to evaluate the removal efficiency of $SO_2$ and $NO_x$ for individual gases and their mixture. In the tests for individual gases, 20% and 76% of $NO_x$ was removed at 1 bar and 10 bar, respectively. Even higher removal efficiencies were achieved for $SO_2$, and also these were maintained for longer as the pressure increased. In the tests for $SO_2$ and $NO_x$ mixture, the removal efficiency of $NO_x$ increased from 13% at 1 bar to 56% at 20 bar because of higher solubility at elevated pressures. $SO_2$ in the mixture was initially dissolved almost completely and then increased by 1,219 ppm at 1 bar and by 165 ppm at 20 bar. Overall, the removal efficiency of $SO_2$ and $NO_x$ was increased at elevated pressures, but it was lower in the mixture compared with individual gases at identical conditions because of a lower pH and associated chemical reactions in water.

• Clean Technology
• /
• v.28 no.1
• /
• pp.9-17
• /
• 2022

Electrochemical carbon dioxide (CO₂) reduction technology, one of the promising solutions for climate change, can convert CO₂, a representative greenhouse gas (GHG), into valuable base chemicals using electric energy. In particular, carbon monoxide (CO), among various candidate products, is attracting much attention from both academia and industry because of its high Faraday efficiency, promising economic feasibility, and relatively large market size. Although numerous previous studies have recently analyzed the GHG reduction potential of this technology, the assumptions made and inventory data used are neither consistent nor transparent. In this study, a comparative life cycle assessment was carried out to analyze the potential for reducing GHG emissions in the electrochemical CO production process in a more transparent way. By defining three different system boundaries, the global warming impact was compared with that of a fossil fuel-based CO production process. The results confirmed that the emission factor of electric energy supplied to CO₂-electrolyzers should be much lower than that of the current national power generation sector in order to mitigate GHG emissions by replacing conventional CO production with electrochemical CO production. Also, it is important to disclose transparently inventory data of the conventional CO production process for a more reliable analysis of GHG reduction potential.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.117-122
• /
• 2008

Acoustic test was performed to verify the ability of KSLV-I PLF acoustic protection system (Acoustic blanket) to reduce the acoustic load. The test results showed that the acoustic protection system has +3 dB safety margin compared with design requirement. This paper also illustrates the increase of insertion loss by the acoustic protection system by comparing that of the bare PLF structure.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.459-460
• /
• 2011

우리나라 농업용저수지는 17,600여개로 전체 농업용 저수지중 저수용량 10만m3 미만의 소규모 저수지가 전체저수지의 88.5%를 차지하고 있으며 10만m3 이상의 저수지는 11.5%를 차지하고 있다. 농업용저수지의 주된 목적은 농업용수 공급에 있으나 최근 기상이변과 집중호우의 증가로 인하여 발생하는 재해를 대비하기 위하여 전국에 널리 산재해있는 농업용저수지를 이용하여 유역의 도달시간을 지체 시킨다면 하류지역의 홍수량을 저감시킬 수 있을 것이다. 홍수조절능력을 보유하지 못한 중소규모 저수지의 홍수능력을 증대시켜 유역의 홍수량을 저감시키기 위하여 본 연구에서는 농업용 저수지의 홍수저감 분석을 위한 대상저수지를 선정하였다. 향후 시범 저수지의 수문분석 및 모니터링을 통하여 저수지 하류 홍수저감 및 홍수조절 효과를 분석하여 시범 저수지 기반의 홍수대응능력 증대 기술을 모색 하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.104-109
• /
• 2002

본 논문에서는 기존의 BLDC전동기 구동방식에 의한 등가회로를 스위치가 off되는 상의 전류 및 역기전력을 고려한 새로운 토크모델을 이용하여 사다리꼴 역기전력을 가지는 BLDC전동기의 전환시 발생하는 토크맥동과 평균토크를 개선할 수 있는 새로운 토크맥동 저감방식을 제안하였다. BLDC전동기의 전기적인 등가모델 및 전류현상과 전환시 발생하는 토크맥동에 대하여 기술하였으며 발생토크의 변동의 원인이 되는 역기전력과 전류와의 관계를 고찰하였다. 이를 바탕으로 전환시 발생하는 토크맥동을 개선하기 위하여 스위칭 소자가 off 되는 상의 전류 및 역기전력을 고려한 상승상과 감쇄상의 전류기울기 제어 및 전환시점제어를 통한 토크맥동 저감방식을 제안하였으며, 전환시 발생하는 맥동토크의 저감효과에 대하여 해석하였다. 이의 검증을 위하여 MATLAB/Simulink를 이용하여 제안한 토크맥동 저감방식의 저감효과의 타당성을 검증하였다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.38-40
• /
• 2003

본 연구에서 적용한 저 NOx 연소법의 NOx 저감 효과를 비교해 보면 다단 연소법이 지연연소 효과와 국부적인 최고 화염온도 감소, 고온부에서의 산소농도 감소효과 등이 동시에 나타나 저 과잉공기 연소법, 배기가스 재순환법, 이단 연소법 보다 더 큰 NOx 저감효과를 얻을 수 있음을 알 수 있었다. 다만, 총 공급공기 량에 대한 분할 공급공기량의 비가 일정수준 이상으로 커지면 CO 발생량 증가로 효율저하 등의 문제점이 우려되므로 연소상태를 저하시키지 않는 공급비를 산정하는 것이 중요할 것으로 생각된다.