• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.767-773
• /
• 2011

The purpose of this study was to investigate the possibility of an alternative fuel resource by incinerating a mix of combustible MSW (municipal solid waste) and offals after separating recyclable material at the MRF (material recovery facilities) location. We analyzed the physical and chemical properties including the 3-contents, the calorific value, and chemical compositions of the separation rejects in MRF, and compared the results with combustible MSW. Moreover, we experimented the trend of combustible properties and the concentration change of air pollutants at mixed incineration in the MSW incinerator. According to the results of the experiment, the separation rejects showed higher heating value (5,865 kcal/kg), and lower moisture and ash content than combustible MSW. Since we have incinerated MSW in the MSW incinerator mixing the offals at 30% and 50% respectively, we know that the change of the concentration of dust, $SO_2$, $NO_2$, and CO did not appear significant, and not exceed the pollutants emission regulation. But, considering the enhancement of the HCl emission concentration (max. 33.7 ppm) at the co-incineration of the 50% offals, we believe that the proper mixing ratio of the separation rejects would become within 30%.

• Resources Recycling
• /
• v.21 no.5
• /
• pp.72-78
• /
• 2012

In general, recyclable items are separately discharged from households and then, hand-sorted into different types of valuables at materials recovery facilities (MRF). However, most of residues after hand-sorting are finally end up with landfill and/or incineration due to lack of separation technologies and economical reasons. In the present study, physical properties on recyclable items obtained from an MRF are investigated to improve the recovery of valuable items. The results of physical compositions based on the sizing tests are also presented.

• Resources Recycling
• /
• v.19 no.3
• /
• pp.24-32
• /
• 2010

In the present work, a new separation system with rotating rakes has been developed to separate the film-based plastics from the recyclable materials, and environment assessment is also carried out during operation of the device. Capacity of the device was about 5.3 ton/hr at a rakes rotation speed of 26.0 rpm (the number of rakes in the 1st, 2nd and 3rd trials were 39, 52 and 48, respectively) and a belt conveyor speed of 38.5m/min, which satisfied the initial design capacity (5.0 ton/hr). Recovery ratio and purity of the plastic films were 92.6% and 96.5%, respectively at a rotation speed of 28 rpm. The levels of noise, vibration and particulate emission were below material standard regulatory limits. Plastic refused fuel (RPF) was also prepared with the recovered films. The calorific value and chlorine content of the prepared RPF were 9,740 kcal/kg and 0.18%, respectively which satisfy the first grade quality specification of the Korean RPF standard. As a result of this work, recovery of energy resources from the municipal solid waste is possible by adopting the developed separation device.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.102-107
• /
• 2017

To estimate the bulk density applying the composition rate for recyclable residential waste, the composition rates by volume and weight basis, the bulk densities of the separated and commingled wastes were investigated four times respectively for recyclable waste of 1,800 kg transported to waste recovery facility. The bulk densities for separated wastes were $379.0kg/m^3$ of glass bottles that is highest and metals, residues, others, cans, plastics in order. The composition rates for each separated waste were changed widely depending on either volume basis or weight basis. The composition rate by weight basis as 40.6% of the glass bottles, 32.6% of the plastics were changed to 60.2% of the plastics and 8.9% of the glass bottles in that by volume basis. The bulk density of the commingled wastes applying the composition rate by volume basis showed the similar value to the measured density than by weight basis. So it was estimated that the composition rate by volume basis was appropriate for determining the bulk density of the commingled recyclable wastes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.76-88
• /
• 2012

In this study, the treatment flow of the recyclables(paper, plastic, metal, etc.) collected and separated from MSW was investigated throughout entire phase from separation and collection to final disposal. Based on the site survey, most recyclables came into six material recovery facilities were comparatively managed well. However, some of recyclables showed irrelatively transportation flow. Because the main income source of the recyclables transportation companies is profit margin between treatment and transportation cost based on economics only therefore, it occurs an unnecessary route and long distance transportation while going to final destination. This unreasonable system should be a serious problem relating establishment of the resource recycling system. As a result of this study, in order to establish the reasonably resource recycling system, recycling center including material recovery facility has to manage the recyclables generated in close range preferentially. Also integrated its treatment system over a wide area will need to be considered as a basic step for the reasonable reasonably resource recycling system.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.63-71
• /
• 2009

Recyclable wastes coming into material recovery facilities(MRFs) is mostly packed by plastic bag or sack bag. Bag rupturing device is essential to improve capacity and efficiency of MRFs. Bag opening works of MRFs is mostly done by numerous workers and shredder-type bag rupturing device. It often makes a problems; decreased capacity, shredded recyclables, worker safety by explosion and broken glasses, etc. In the present work, bag rupturing device with octagonal rotating blade drums has been developed to solve the existing problems and environment assessment is also performed during operation of the device. Capacity of the device was about 5.6 ton/hr at 8.2 rpm of drum revolution speed and 1.25 m/min of belt conveyor speed. It satisfied initial designed capacity(5.0 ton/hr) and max. capacity 8.8 ton/hr was achieved at 12.5 rpm of drum revolution speed and 1.50m/min of belt conveyor speed. Bag rupturing efficiencies on outer and inner bag were obtained at 100% and about 95.6% as average, respectively and original form of glass bottles in the bag was maintained without broken by about 96.5%. This result shows that the safety in hand sorting by the workers could be improved. As result of environmental assessment on the noise, vibration and particulates, the measured levels on noise, vibration and particulates show the below standard regulatory limits. It could be concluded that the problems of existing devices in MRFs could be solved by adopting the bag rupturing device with octagonal rotating blade drums in on-site operation.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.5-12
• /
• 2019

The study is carried out to survey the proper management and to propose an eco - friendly separation system through efficient screening and resource recovery of excavated materials containing waste from various excavating fields such as reconstruction of landfill sites for reuse, reclamation of unsanitary landfill and residential land development of waste dumping sites. The current status and screening process and analytical characteristics of the excavated materials containing waste were reviewed. Through the analysis of the samples such as separated combustibles, recyclable soils and residues collected from the on-site visits we were able to understand the characteristics of separated materials and excavated materials containing waste such as calorific value, elementary composition, TOC, foreign material content and LOI. It has been found that elimination of the moisture of excavations, removal of attached soil from the surfaces of the excavated combustibles and the quantitative supply method of the input devices are the main operating factors as essential factors for the optimal separation of excavated materials containing waste. For efficient management and recycling of excavated materials containing, it is necessary to set criteria of ash content in separated combustibles and criteria organic matter content in separated soils.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.4
• /
• pp.64-68
• /
• 2010

Recently, MBT(Mechanical Biological Treatment) facilities were built up and operated to separate and recycle MSW(Municipal Solid Wastes)in South Korea. However, the size distribution of MSW is very rough, and it is causing operation problem because MSW would be crushed in undersize diameter by mechanical equipment before feeding each seperation process. Also, the organic material should be pre-seperated to reuse recycle material in MSW. In this research, the reactor of 1ton/batch using the super-heated steam was tested to present the separation efficiency and the size distribution of MSW by experimental factors.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.1
• /
• pp.84-89
• /
• 2003

The purpose of this study was to evaluate and improve the pre-treatment facility for foodwaste and sewage sludge mixture treatment. The process of foodwaste pre-treatment consists of storage, classification with crushing, and thickening. The effluent of sewage treatment facility was used as the diluting and washing water. The panicle size of foodwaste after pre-treatment was almost under 2mm, the mixture of foodwastes and sewage sludge showed an advantage to the anaerobic digestion. The amount of gas production increased from 0.8ton/day ($CH_4$ : 0.5ton/day) to 3.5ton/day ($CH_4$ : 2.3ton/day) after the anaerobic digestion of the foodwastes and sewage sludge mixture. The amount of sludge cake increased from 11.2ton/day to 21.2ton/day. Therefore, the proper operation of the foodwaste pre-treatment facility was contributed to the efficient anaerobic digestion of foodwaste and sewage sludge mixture treatment.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.4
• /
• pp.27-34
• /
• 2010

본 연구는 농촌마을을 환경친화적으로 계획하는데 활용할 수 있는 신재생에너지 중에서 태양에너지를 고려한 농촌그린빌리지 디자인에 대한 경제성분석을 목적으로 한다. 이 논문에서는 경제적 측면에서 에너지 수지를 고려하여 세 가지 형태의 연구대상 농촌마을에 대한 분석을 실시하였다. 연구대상 농촌마을들에서 실제로 사용했던 전체 에너지를 태양광 발전으로 대체하기 위한 태양광 발전시스템인 3 kWp의 단위 모듈 (PV 시스템)의 개수들을 마을별로 추정하였다. 경제성 분석에서는 두 개 마을의 순현재가치 (NPV)가 평가기간 25년내에 마이너스 값을 보였으며, 나머지 하나의 마을에서 경제성이 있는 것으로 분석되었다. 정부에서 시설설치 보조금을 60 % 지원해 줄 경우에는 모든 마을에서 25년 내에 경제성이 있는 것으로 평가되었다. 경제성 평가 관련인자들에 대한 민감도 분석을 BC (Benefit/Cost) 비율 변화에 대하여 실시한 결과, 설치비용, 전력판매단가, 할인율, 단가 증가율순으로 높은 변화율을 보였다. 본 연구의 결과는 태양에너지가 에너지 재활용이 가능한 농촌마을을 계획함에 있어서 정부의 적절한 지원정책과 에너지 잠재력이 높은 농촌마을을 선별한다면 매우 효과적인 결과를 얻을 수 있다는 것을 보여준 것으로 판단되었다.