• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.142-149
• /
• 2013

In general, a color of an image is represented by using red, green, and blue channels in a RGB camera system. However, only information of three channels are limited to estimate a spectral reflectance of a real scene. Because of this, the RGB camera system can not accurately represent the color. To overcome this limitation and represent an accurate color, researches to estimate the spectral reflectance by using a multi-channel camera system are being actively proceeded. Recently, a reflectance estimation method adaptively constructing a similar training set from a traditional training set according to a camera response by using a spectral similarity was introduced. However, in this method, an accuracy of the similar training set is reduced because the spectral similarity based on an average and a maximum distances was applied. In this paper, a reflectance estimation method applied a spectral similarity based on a correlation coefficient is proposed to improve the accuracy of the similar training set. Firstly, the correlation coefficient between the similar training set and the spectral reflectance obtained by Wiener estimation method is calculated. Secondly, the similar training set is constructed from the traditional training set according to the correlation coefficient. Finally, Wiener estimation method applied the similar training set is performed to estimate the spectral reflectance. To evaluate a performance of the proposed method with previous methods, experimental results are compared. As a result, the proposed method showed the best performance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.532-534
• /
• 2005

본 논문은 자동적인 언어기반자원구축을 위해 신문 말뭉치에서 괄호를 이용하여 추출한 대역어쌍들을 군집화하고 각 군집에서 적합대역어를 선정하는 방법을 제안한다. 기존 연구에서 주로 제시된 음차표기어 대역쌍 추출 방법은 완전한 형태의 영어원어 자소 정보를 이용하기 때문에 약어는 고려대상에서 제외되었다. 그러나 약어형태의 영어원어가 신문에서는 약 $82\%$를 차지하기 때문에 이를 처리할 방법이 필요하다. 따라서 본 논문에서는 바이그램을 기본으로 하는 형태정보를 이용하여 적합대역어를 선정하고 이와 형태정보를 공유하는 한국어대역어쌍들을 군집화한다. 또한, 음차표기어와 두문자어에 대한 처리를 추가하여 적용범위를 넓힌다. 실험을 위하여 신문말뭉치에서 추출한 대역어쌍 1,806개 중 영어원어를 기준으로 한국어대역어의 수가 5개 이상인 대역어쌍 집합 200개를 선정하였다. 본 논문에서 제시한 방법으로 측정한 결과, 대역어 군집화에 대해서는 $74\%$의 정확율과 $65\%$의 재현율을, 적합대역어 선정에 대해서는 $97\%$의 정확율을 보였다.

• Korean Journal of Environment and Ecology
• /
• v.20 no.1
• /
• pp.1-8
• /
• 2006

The objective of this study was to monitor the regenerated process of natural vegetation on the rear-slope of Jangheung multi-purpose dam using the recycling eco-revegetation technique. The monitoring plots were established in May 2004 and the plots were monitored in May 2004 and October 2005. Flora, plant community structures, naturally introduced plants, death rates were monitored. The change of flora after wood chip mulching decreased in family and species, but the influence of vine tree was extended. The urbanization index declined. Naturally introduced species and death ratios at the monitoring plot had a tendency to a higher increase in the deciduous broad-leaved forest.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.203-208
• /
• 2006

The management of image information settles as an important field with the advent of multimedia age and we are in need of the effective retrieval method to manage systematically image information. This paper has complemented the problem caused by the absence of space information that is a weak point of the existing color histogram method by assigning regions of features, and raised accuracy by adding texture and shape information. And existing methods using multiple features have problems that the retrieval process is embarrassed because each weight is set up manually. So we has solved these problems by assignment of weight applying fuzzy integral. As a result of experimenting with 1,000 color images, the proposed method showed better precision and recall than the existing method.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.713-722
• /
• 2000

This study analysed error of measurement and reproducibility for particle size analysis by the laser diffraction spectrometer. Laser diffraction spectrometers has become a very important method of particle size analysis. This measuring method has the advantage of simple operation, good reproducibility and rapid analysis. A feeding and dispersing system have been developed, which allows mass throughputs between 0.1~23 g/min in flowing air and 1.4~35% in flowing liquid. It has been used as a feeder unit for wet and dry particle size analysis from diffraction patterns. Relevant parameters, such as particle shape, particle size, dispersion, flow rate, concentration were analysed for measuring error. And system parameters of instruments for measurement of dynamic processes, eg, measuring time, focal plane, injection pressure drop and dispersion effect by the ultrasonic and mixing of preliminary treatment, were also discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3C
• /
• pp.167-178
• /
• 2008

Rainfall-induced slope failures were simulated by seepage and stability analyses for actual slopes of weathered soils. After undisturbed sampling and testing on a specimen of unsaturated conditions, a seepage analysis was performed under actual rainfall and it was found that the pore water pressure increased at the boundary of soil and rock layers. The safety factor of slope stability decreased below 1.0 and the failure of actual slope could be simulated. Under design rainfall intensity, the seepage analysis could not include the effects of the antecedent rainfall and the rainfall duration. Due to these limitations, the safety factor of slope stability resulted in above 1.0, since the hydraulic head of soil layers had not be affected significantly. In the analysis of another slope failure, the parameters of unsaturated conditions were evaluated using artificial neural network (ANN). In the analysis of seepage, the boundary of soil and rock was saturated sufficiently and then the safety factor could be calculated below 1.0. It was found that the failure of actual slope can be simulated by ANN-based estimation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.23-28
• /
• 2013

The process of a feature matching for two different spatial data sets is similar to the process of classification as a binary class such as matching or non-matching. In this paper, we calculated a threshold by applying an equal error rate (EER) which is widely used in biometrics that classification is a main topic into spatial data sets. In a process of discriminating what's a matching or what's not, a precision and a recall is changed and a trade-off appears between these indexes because the number of matching pairs is changed when a threshold is changed progressively. This trade-off point is EER, that is, threshold. To the result of applying this method into training data, a threshold is estimated at 0.802 of a value of shape similarity. By applying the estimated threshold into test data, F-measure that is a evaluation index of matching method is highly value, 0.940. Therefore we confirmed that an accurate threshold is calculated by EER without person intervention and this is appropriate to matching different spatial data sets.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2049-2053
• /
• 2007

KModSim은 수자원배분에 관련된 물리적, 수문학적, 제도적, 그리고 행정적인 요구들을 동시에 만족하도록 디자인된 범용 우선순위 목적 선형최적화 모형으로써 자연유3tt입량과 기득 수리권 혹은 기득 저류권 등과 같은 다양한 형태의 저수권 사이의 조화운영이 가능하다. KModSim은 목적함수에 관련된 제약조건의 유연한 설정과 변경이 가능하며, 기존의 최적화 방법과 다르게 유역통합모의에 관련한 모형변수가 모형내에서 자동적으로 생성되도록 프로그램화 되어있다. 본 연구에서는 금강유역내 수자원의 효율적인 운영을 위하여 과거운영자료를 토대로 저수지운영율을 개발하고 시스템단계(system states)를 이용하여 KModSim 네트워크에 운영율을 적용하였다. 금강유역에서 개발한 운영율을 적용하고 모의한 결과 개발된 운영율은 실제저류량을 잘 재현하는 것으로 나타났다. 본 연구에서 개발된 운영율 및 시스템단계 방법은 다중목적 우선순위 선형최적화 모형을 이용하여 유역의 다양한 수자원운영모의에 사용될 수 있을 것으로 기대된다.

• Journal of KIISE:Software and Applications
• /
• v.35 no.6
• /
• pp.392-403
• /
• 2008

User reviews are valuable information that can be used for various purposes. In particular, the product reviews on online shopping sites are important information which can directly affect the purchasing decision of the customers. In this paper, we present our design and implementation of a system for summarizing the customer's opinion and the features of each product by analyzing reviews on a commercial shopping site. During the analysis process, several natural language processing(NLP) techniques and the semantic dictionary were used. The semantic dictionary contains vocabularies that are used to express product features and customer's opinions. And it was constructed in semi-automatic way with the help of the tool we implemented. Furthermore, we discuss how to handle the vocabularies that have different meanings according to the context. We analyzed 1796 reviews about 20 products of 2 categories collected from an actual shopping site and implemented a novel ranking system. We obtained 88.94% for precision and 47.92% for recall on extracting opinion expression, which means our system can be applicable for real use.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.6
• /
• pp.261-268
• /
• 2015

In spoken chatting systems, users'spoken queries are converted to text queries using automatic speech recognition (ASR) engines. If the top-1 results of the ASR engines are incorrect, these errors are propagated to the spoken chatting systems. To improve the top-1 accuracies of ASR engines, we propose a post-processing model to rearrange the top-n outputs of ASR engines using a ranking support vector machine (RankSVM). On the other hand, a number of chatting sentences are needed to train chatting systems. If new chatting sentences are not frequently added to training data, responses of the chatting systems will be old-fashioned soon. To resolve this problem, we propose a data collection model to automatically select chatting sentences from TV and movie scenarios using a support vector machine (SVM). In the experiments, the post-processing model showed a higher precision of 4.4% and a higher recall rate of 6.4% compared to the baseline model (without post-processing). Then, the data collection model showed the high precision of 98.95% and the recall rate of 57.14%.