• Korean Journal of Environmental Biology
• /
• v.25 no.4
• /
• pp.385-393
• /
• 2007

Benthic macroinvertebrate communities were studied after a small dam removal from the mid-section of the Gyeongan stream in Gyeonggi-do, Korea. Quantitative sampling was conducted at immediately upstream (upper) and downstream (lower) sites from the dam as well as at the site where the dam was located (dam site: middle) using a Surber sampler (50$\times$50 cm, mesh 0.25 mm), four times (November 2004, May 2005, January 2006, and May 2006) after the dam removal. As a result, 46 species of benthic macroinvertebtates, belonged in 35 genera, 27 families, 11 orders, 5 classes, and 4 phyla, were sampled from the stream sites, but the number of species that occurred at each sampling trial was different (ranged 3$\sim$17 spp.) according to the seasons and sites. Approximately one year after the dam removal, the species number has in-creased and taxa composition has changed as the microhabitat became more heterogeneously due to a riffle formation in the upstream site. Chironomid larvae and tubificid worms, which are common in Korean urban streams, were the dominant species, while Hydropsyche kozhantschikovi was the 2nd dominant species at some sampling trials. In general, McNaughton's dominance indices decreased and Shannon species diversity indices increased approximately one year after the dam removal. Compositions of collector-filterers, clingers, and swimmers increased as hydropsychid caddisflies, heptageniid mayflies, and baetid mayflies increased, respectively, in the upstream site. The group pollution index and the ecological score using benthic macroinvertebrates both indicated that water environment has been improved in the upstream site after the dam removal.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2009

In order to optimize tissue culture conditions for genetic transformation of zoysiagrass (Zoysia japonica Stued.), the effect of plant growth regulators and culture medium supplements on embryogenic callus induction from mature seeds of a cultivar 'Zenith' were investigated. The optimal concentration and treatment period of NaOCl is 30% (v/v) for 60 minutes. Cultivation of mature seed on the callus Induction medium containing 3 mg/L 2,4-D and 3 mg/L dicamba showed 17.5% of embryogenic callus formation frequency. Supplementation of 1 g/L casein hydrolysate and 500 mg/L L-proline improved frequency of embryogenic callus induction. Audition of the medium with 5 mg/L $AgNO_3$ and 20 mg/L cysteine enhanced frequencies of embryogenic callus induction. Efficient callus induction system established in this study will be useful for molecular breeding of Boysiagrass through genetic transformation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.51-62
• /
• 2009

This study was carried out development a new composting system to lower copper and zinc concentration in plg sludge compost and conduct an inquiry into the possibility of crop cultivation. The concentrations of nitrogen, phosphorus and pH averaged 4.4%, 6.3% and 7.57, respectively, which were higher concentrations than in commercial organic fertilizers, and the concentrations of copper and zinc averaged 805 and 1,704 mg/kg, respectively, which were beyond the heavy metal concentration limit in byproduct compost. Hydrated citric acid I lowered the concentrations of copper and zinc by 58% and 97%, respectively and hydrated oxalic acid II lowered the concentrations of copper and zinc by 48% and 56%, respectively in pig sludge compost. Lower concentrations of copper and zinc in pig sludge resulted from the enhanced hydrated-citric acid concentration in organic acid solution mixed with distilled water. The concentrations of copper and zinc were 330, and 41 mg/kg in the pig sludge treated with 100% hydrated citric acid. Agitation composting system stabilized the compost earlier than the stationary composting system, in which the stabilization condition was confirmed by higher temperature by $4^{\circ}C$ at highest temperature and 7 days earlier cooling down after highest temperature. The levels of germination index (G.I) 80 were obtained 15 and 20 days after composting in agitation and stationary composting system, respectively. The concentrations of copper and zinc were 2.4 and 4.26 mg/kg respectively in soils amended with pig sludge compost after removing process of heavy metals by citric acid, but 8.0 and 22.37 mg/kg, respectively in soils amended with Pig Sludge. The concentrations of heavy metals was highest in com cultivated in soils amended with pig sludge. The copper and zinc concentrations In corn leaves were 75.2 and 50.56 mg/kg respectively, which were 4 and 2 fold higher than the com cultivated in soils amended with pig sludge compost after heavy metal removing process by hydrated citric acid.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.834-838
• /
• 2000

As an endeavor to establish a micropropagation system for Epimedium koreanum Nakai., this study was carried out to define methods to disinfect its explants and media for callus induction, proliferation and plant regeneration. The lowest infection rates by fungi or bacteria on apical and axillary bud explants of rhizome were observed when they were immerged in 0.3% NaOCl solution for 20 min after soaked in 0.1% $AgNO_3$ solution for 30 min, but leaf explants were seldom infected with fungi or bacteria by this disinfectant method. The highest rate of plantlet formation was obtained from the explants disinfected in 0.3% NaOCl solution for 20 min after soaked in 0.1% $AgNO_3$ solution for 60 min for tip buds and in 0.1 % $AgNO_3$ solution for 30 min for axillary buds of rhizome. Induction rate of callus was the highest from the explants disinfectd in 0.3% NaOCl solution for 20 min after soaked in 0.2% $AgNO_3$ solution for 15 min. Callus growth was proper in a modified 1/2 MS medium including half strength of $NH_4NO_3$ with $0.02-0.2mg{\cdot}L^{-1}$ BA and $2.0mg{\cdot}L^{-1}$ NAA. Low rate of plantlet regeneration was obtained in 1/2 UM or 1/2 White medium with $2.0mg{\cdot}L^{-1}$ BA and $0.2mg{\cdot}L^{-1}$ AA.

• Clean Technology
• /
• v.17 no.4
• /
• pp.306-313
• /
• 2011

Flux or solder is used in soldering process for manufacturing electronic parts such as printed circuit boards (PCB). After soldering process, residual flux and solder paste on the parts should be removed since their residuals could cause performance degradation or failure of parts due to their corrosion and electric leakage. Ozone depletion substances such as 1,1,1- trichloroethane (TCE) and HCFC-141b have widely been using for removal of residual flux and solder paste after soldering process In manufacturing of electronic parts until now. In this study, non-aqueous cleaning agents without flash point were developed and applied to industrial field for replacement of cleaning agents with ozone depletion. In order to develop non-aqueous cleaning agents without ethers, esters, fluoride- type solvents. And their physical properties and cleaning abilities were evaluated, and they were applied to industrial fields for cleaning of flux and solder on the PCB. And vacuum distillation apparatus were operated to determine their operating conditions and recycling yields for recycling of used cleaning agents formulated in this study. As a result of physical properties measurement of our formulated cleaning agents, they were expected to have good wetting and penetrating power since their surface tensions were relatively low as 18.0~20.4 dyne/$cm^2$ and their wetting indices are relatively large. And some cleaning agents holding fluoride-type solvents as their components did not have any flash point and they seemed to be safe in their handling and storage. The cleaning experimental results showed that some cleaning agents were better in their cleaning of flux and solder paste than 1,1,1-TCE and HCFC-141b. And industrial application results of the formulated cleaning agents for cleaning PCB indicated that they can be applicable to industry due to their good cleaning capability in comparison with HCFC-141b. The recycling experiments of the used formulated cleaning agents through a vacuum distillation apparatus also showed that their 91.9~97.5% could be recycled with its proper operating conditions.

• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.101-114
• /
• 2011

The rock-carved Buddha statue at Dosolam (Korea Treasure No. 1200) of the Seonunsa temple in Gochang is unique style sculptured on natural rock cliff of 13.0m height. The Buddha statue is composed of volcanic complex with tuff, dacitic tuff breccia, tuff bereccia and lithic tuff. Especially, the Buddha statue is characterized by hydrothermal alteration and fragmentation on the upper and lower part. As a result of damage diagnosis, exfoliation and detachment of physical weathering are high of 11.3% and 9.3%, respectively. Infrared thermography analysis, exfoliation and micro-cracks occurred in the measuring parts that have not been confirmed by naked eyes. Chemical index of alteration and weathering potential index of host rock for the Buddha statue are 55.16 to 64.01 and 6.14 to 9.92 which are represented within highly weathering degree. In surface, dark black, reddish brown and white discoloration are observed prominently in the lower. Brown discoloration 6.9% is highest. According to the P-XRF measurements, high concentration of Fe in common, in part of dark black discoloration was Mn, white and brown discoloration in part of S and Ca content were higher. Biological weathering that yellowish brown and dark gray crustoes lichenes appeared by 20.8% and 13.3%, respectively. Therefore, comprehensive deterioration rate of Buddha statue show physical damage by 21.2%, discoloration for inorganic contaminants by 10.8% and biological damage by 39.4%. Ultrasonic velocity measurement carried out of Buddha statue on the surface by 555 points. Measured value of ultrasonic velocity was about 2,273m/s(1,067 to 3,215m/s, and weathering coefficient is 0.5(0.4 to 0.8) that progress on MW(moderately weathered) to HW(highly weathered) grade of rocks.

• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.11-19
• /
• 2004

Stage 1 sleep provides important information regarding interpretation of nocturnal polysomnography, particularly sleep onset. It is a short transition period from wakeful consciousness to sleep. Lack of prominent sleep events characterizing stage 1 sleep is a major obstacle in automatic sleep stage scoring. In this study, we attempted to utilize simultaneous EEC and EOG processing and analyses to detect stage 1 sleep automatically. Relative powers of the alpha waves and the theta waves were calculated from spectral estimation. Either the relative power of alpha waves less than 50％ or the relative power of theta waves more than 23％ was regarded as stage 1 sleep. SEM (slow eye movement) was defined as the duration of both eye movement ranging from 1.5 to 4 seconds and regarded also as stage 1 sleep. If one of these three criteria was met, the epoch was regarded as stage 1 sleep. Results f ere compared to the manual rating results done by two polysomnography experts. Total of 169 epochs was analyzed. Agreement rate for stage 1 sleep between automatic detection and manual scoring was 79.3％ and Cohen's Kappa was 0.586 (p＜0.01). A significant portion (32％) of automatically detected stage 1 sleep included SEM. Generally, digitally-scored sleep s1aging shows the accuracy up to 70％. Considering potential difficulties in stage 1 sleep scoring, the accuracy of 79.3％ in this study seems to be robust enough. Simultaneous analysis of EOG provides differential value to the present study from previous oneswhich mainly depended on EEG analysis. The issue of close relationship between SEM and stage 1 sleep raised by Kinnariet at. remains to be a valid one in this study.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.440-451
• /
• 2000

This study was conducted in order to provide essential data and relevant management proposal to conserve and maintain big and old trees in a rational way. For the field survey, 77 big and old trees preserved by the laws in Chollabuk-do, Korea were investigated. The study results are summarized as follows : 1. To conserve and manage big and old trees, the valuable trees have been designated as natural monument trees and protection-needed trees. There are 141 individuals of 37 species designated as natural monuments and 10,049 individuals of 102 species designated as protection-needed trees. 2. Management budget for natural monument trees was devoted at 70% from the national expenditure, but that for protection-needed trees was devoted at 98% from the local expenditure. 3. Standardized sign boards and sign stones for natural monument trees were well placed and other protection facilities such as fences, branch supports and branch holdings were established. On the other hand, management of protection-needed trees was deficient overall. 4. Problems for designation process and management of protection-needed trees could include items such as insufficient management budget, various development activities, land ownership, misjudgement of tree age and species identification, unsatisfaction of sign board placement, insufficient surgery for damaged trees, pavement around tree root system and environmental pollution around the trees. 5. In order to improve the existing management methods of big and old trees, the following schemes were suggested : the development of practical criteria for natural monument and protection-needed trees, nationwide surveys of big and old tree resources, the security of national budget, securing sufficient spaces for the tree growth, specialization of management systems, extended practices of tree form management, establishment of permanent standard signs and consideration of opinions of village residents.

• Journal of Mushroom
• /
• v.3 no.1
• /
• pp.1-23
• /
• 2005

World production of mushrooms has been increasing 10-20% every year. Recently, Pleurotus eryngii and P. nebrodensis are very popular as new mushroom species for cultivation. Two kinds of mushrooms, Gumji (Ganoderma) and Soji, were described in old book of Samguksagi (History of the three kingdoms; 1145) in Koryo-dynasty. Many kinds of mushrooms were also described in more than 16 kinds of old books during Chosun-dynasty in Korea. One hundred and sixty commercial strains of 25 species in mushrooms were distributed to cultivators. By the way, only 8 varieties of them have registered variety protection. Mushroom industry as important export products developed from 1960 to 1980. Production of mushrooms as food was 181,828 metric tons valued at 800 billion Korean won in 2003. Isolated and identified substances from mushrooms are promising antifungal, antiinflammatory, antitumor, antiviral (anti-HIV), antibacterial & antiparasitic, antidiabetic, immunomodulating, kidney tonic, hepatoprotective, nerve tonic, and sexual potentiator. These substances can also be used for blood pressure regulation and effective against cardiovascular disorders, hypocholesterolemia & hyperlipidemia, and chronicbronchitis. Mushroom products including pharmaceuticals, tonics, healthy beverages, functional biotransformants, and processed foods have also became available on the markets. Compost and feed can likewise be made from mushroom substrates after harvest. The mushroom industry is already one of the fastest growing investment sectors in Korea. By the way, there is a need to strain improvement for variety protection, advanced cultivation technology at low cost for growers, and control of demand and supply for marketing in order to more upgrade development of mushroom industry in the future.